OKAMOTO MACHINE TOOL WORKS Product List

SEARCH FILTER

1 ~ 42 of 42 POST

[MFR]OKAMOTO

[Model]

[Year]

ID:#62

[MFR]OKAMOTO

[Model]

[Year]

Okamoto (5 units)

ID:#63

[MFR]OKAMOTO

[Model]PFG 450

[Year]

Brand: Okamoto Model: PFG 450 Type: Manual Motor: 415v

[MFR]OKAMOTO

[Model]

[Year]

Brand: Okamoto Table: 6" x 18"

[MFR]OKAMOTO

[Model]PSG-52DXNC

[Year]1991

Fanuc-0M Tuning speed:3000rpm Grindstone diameter:φ205*19*φ50.8(inner diameter) T:500*200*80(H)

[MFR]OKAMOTO

[Model]SRG-200

[Year]2000

Horizontal axis Cup-shaped

[MFR]OKAMOTO

[Model]PSG-20B

[Year]1974

1000rpm Grindstone diameter:φ510*50*127(inner diameter) T:2000*500*105(H) forward & back / left & right movement Auto cuts

[MFR]OKAMOTO

[Model]PSG-52C

[Year]1979

Tilting chuck:400*125 Up and down digital

[MFR]OKAMOTO

[Model]PFG-500

[Year]1994

Turning speed:3000rpm Grindstone diameter:φ180*32*φ31.75 chuck:380*110*80(H) SONY counter (2-axis)

[MFR]OKAMOTO

[Model]PSG-1D

[Year]1965

Permanent magnetic chuck:175*100

[MFR]OKAMOTO

[Model]PSG-1E

[Year]1971

Overhauled in 1996' Permanent magnetic chuck:175*100

[MFR]OKAMOTO

[Model]ASM-100A

[Year]1994

Outer blade

[MFR]OKAMOTO

[Model]ASM-100A

[Year]1993

Inner cutting slicer

[MFR]OKAMOTO

[Model]ASM-160A

[Year]1985

ASM-160A(Reform) Spindle motor:5.5kw 2P Blade:φ670(outer diameter)*φ240(inner diameter) Cutting feed stroke:Max 230 Cutting feed speed:1~200mm/min Cutting workpiece size:φ125*L500

[MFR]OKAMOTO

[Model]PSG-125

[Year]1979

T:600*500mm(2PC) With X・Y・Z Magnet Scale

ID:#5661

[MFR]OKAMOTO

[Model]SHG-360

[Year]1986

G5D-010

[MFR]OKAMOTO

[Model]PFG-500Ⅱ

[Year]2006

T:600*140 MG:380*110*130 Wheel:φ180*6-32*φ31.75 Wheel motor:1.5kw YZ axis digital scale(Forward and backward・up and down) Coolant tank

[MFR]OKAMOTO

[Model]GTR-350F; GTR-F

[Year]

GTR-350F Max. dia chamfered external gear 400、internal gear 100 Min. dia chamfered 40 Max. module M6 (4DP) Teeth number chamfered each number of 10~60, 61~100, except prime no. Net weight 1,350kgs ---------------------------------------------------------------------------------- GTR-F Max dia chamfered External gear 200φ Internal gear 100φ Mix dia chamfered 40φ Max module M6 (DP4) Teeth number chamfered each number of 10~60、61~100except prime no Net weight 1000 kg

[MFR]OKAMOTO

[Model]IGM-15NCⅢ

[Year]2016

Fanuc Grinding Internal dia :150 Stroke:125 swing over Table:dia600mm X170 Z500 Spindle bore 50mm speed:850rpm less hours

[MFR]OKAMOTO

[Model]PSG-208B

[Year]1985

MG chuck 2000*800 Wheel φ510*50*φ127  980rpm 7.5Kw Left right 2150*Front back 830mm  Table-under wheel 695mm Overhead wheel dresser MG separator+Coolant tank

[MFR]OKAMOTO

[Model]PFG-500DX

[Year]1996

Tilting chuck: 315*110 Grindstone: outer diameterφ180 * width 6~32 * inner diameterφ31.75

[MFR]OKAMOTO

[Model]OKAMOTO NO.2型 (2 sets in stock)

[Year]

MAX TEST WORK 3 Center distance -35~750 Angle of both axes 90°

[MFR]OKAMOTO

[Model]PSG-158DXNC

[Year]2009

F-32i MG chuck:1500*800 S:1750*860*720 Wheel:φ510*50*φ127 700-1500rpm 15Kw Wheel continuously variable transmission Oil cooler

[MFR]OKAMOTO

[Model]PSG-158DXNC

[Year]2009

F-32i MG chuck:1500*800 S:1750*860*720 Wheel:φ510*50*φ127 700-1500rpm 15Kw Wheel continuously variable transmission Oil cooler

[MFR]OKAMOTO MACHINE TOOL WORKS

[Model]IGM2MB

[Year]2008

3-jaw chuckφ380 Spindle:2.2kw type Holder-integrated wheel shaft(0H-06M 6000Rpm)

[MFR]OKAMOTO

[Model]PSG-84DX

[Year]1999

Table work surface:850*400 Chuck size:800*400 Workpiece allowable mass:700kg T-slot width x number:17mm*3 Whetstone (outer diameter 50/60Hz) width * inner diameter:φ355/305*38*φ127mm Rotation speed (50/60Hz):1500/1800min-1 Required power:11kVA ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

[MFR]OKAMOTO MACHINE TOOL WORKS

[Model]IGM-2M

[Year]1996

Capacityφ6-200*200 Grind stroke:200  Internal Grinde Stroke:6000rpm 30000rpm Swingφ600  Table:500 KITAGAWA JN09 9 inch 3jaw scroll chuck Work head angle-5-30° 50-850rpm Variable speed Grinding tank with MG separator Coolant tank with paper filter

[MFR]OKAMOTO MACHINE TOOL WORKS

[Model]PSG-208B

[Year]1986

MG chuck 2000*800  Wheelφ510*50*φ127  980rpm  7.5Kw Left right 2150*Front back 830 Table-under wheel 695 Overhead wheel dresser Paper filter+MG separator+Coolant tank Dust Collector Oil Con

[MFR]OKAMOTO MACHINE TOOL WORKS

[Model]ACC84ST

[Year]

# 1409 OKAMOTO JAPAN Travel: X-850mm Y-430mm Z-450mm , Table Size: 1000 x 400mm, Magnet 800 x 400mm, X,Y,Z Fully Automatic 220V/5KVA Phase:3

[MFR]OKAMOTO MACHINE TOOL WORKS

[Model]PFG-450

[Year]

# 1382 OKAMOTO JAPAN Travel: X-450mm Y-180mm Z-350mm Table Size: 500 x 150mm Magnet 300 x 150mm RPM-2400 With Magnet Plate 220V/3KVA Phase:3

[MFR]OKAMOTO MACHINE TOOL WORKS

[Model]PSG-63EN

[Year]1996

Magnet separator

[MFR]OKAMOTO MACHINE TOOL WORKS

[Model]PSG-63EXB

[Year]2004

FANUC-21GA T:605x300mm X:750 Y340mm 1800rpm

[MFR]OKAMOTO MACHINE TOOL WORKS

[Model]PSG-63DX

[Year]2006

Chuck size 600×300

[MFR]OKAMOTO MACHINE TOOL WORKS

[Model]PFG500-AL II

[Year]2007

T:150x450mm

[MFR]OKAMOTO MACHINE TOOL WORKS

[Model]PSG-52BN

[Year]1987

MG chuck:550*200  Wheel:φ205*19*φ50.8  3000rpm  1.5kw

[MFR]OKAMOTO MACHINE TOOL WORKS

[Model]PSG-84EN

[Year]2000

Chuck 800*400

ID:#16234

[MFR]OKAMOTO MACHINE TOOL WORKS

[Model]PSG-126DX

[Year]2016

FX control  MG chuck φ1200*600  Wheel:φ510*50*127  Motor horsepower UP 11kw Unauthorized gearbox  Oil cooler   Upper dresser  Full auto  Upper and lower digital  Magnet separator   ※Changed to a strong magnetic drum  Dust collector

[MFR]OKAMOTO MACHINE TOOL WORKS

[Model]IGM-2MB

[Year]2007

◆Grinding hole diameter: φ6~200mm ◆Grinding stroke: max. 200mm ◆Swing on the table: φ600mm ◆Swing inside the chuck cover: φ350mm ◆Wheelstone shaft cutting feed (X axis)  Maximum travel: 230mm  Grinding feed rate: 0.2~4mm/min  Rapid feed speed: 500mm/min ◆Table left/right feed (Z axis)  Maximum travel amount: 500mm  Grinding feed speed: 0.1~15000mm/min  Rapid feed speed: 20000mm/min ◆Minimum setting unit  X-axis: φ0.0001mm  Z-axis: 0.001mm ◆Work spindle rotation speed: 50 to 1200min-1 ◆Work spindle rotation angle: -5~30deg. ◆Required power (including optional water injection device): 16kVA ◆Required floor area(frontage * depth * height) (including optional water injection device): 2.45 * 2.05 * 1.848m ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

[MFR]OKAMOTO MACHINE TOOL WORKS

[Model]IGM-2M

[Year]1989

◆Hole diameter that can be ground: φ6~200mm ◆Grinding stroke: max. 200mm ◆Swing inside the chuck cover: φ350mm ◆Spindle rotation angle: -5~30deg. ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

[MFR]OKAMOTO MACHINE TOOL WORKS

[Model]PSG64DX

[Year]2017

◆Size of table work surface (length * width): 605 * 400mm ◆Table movement amount (manual: left/right * front/back): 750 * 440 mm ◆Dimensions of standard chuck that can be installed (length * width * height): 600 * 400 * 85 mm ◆Toy outside diameter ((50/60Hz) * width * inner diameter): φ355/φ305*38*φ127mm ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

[MFR]OKAMOTO MACHINE TOOL WORKS

[Model]PFG500CⅡ

[Year]2017

◆Table work surface size: W140*D600 ◆Table movement amount: 520*180 ◆Distance from the top of the table to the bottom of the whetstone: 320 ◆Dimensions of standard chuck (tilting type): 380*110 ◆Workpiece allowable mass (including chuck): 80 ◆T groove width: 12mm ◆Left and right feed speed (hydraulic): 0.1 to 18m/min ◆Left and right handle feed amount per revolution: 100 ◆Saddle Front and rear manual feed Handle 1 rotation: 5mm, Dial 1 scale: 0.02mm, Fine movement 1 scale: 0.005mm ◆ Grinding wheel head Manual depth of cut One rotation of the handle: 1mm, One scale of the dial: 0.002mm, Vertical rapid feed speed (50/60Hz): 300/360 ◆Whetstone (outer diameter x width x inner diameter): Φ180*6 ~ 32*Φ31.75, rotation speed (50/60Hz): 3000/3600 ◆Motor For grinding wheel shaft: 1.5/2kW/p, For hydraulic pump: 0.75/4kW/p, For vertical rapid traverse 0.1/4kW/p ◆Power Required power (including standard chuck, dust suction and water injection device with separator) 2.5kVA ◆Occupied volume Width*depth*height: 2200*1351*1720 ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

[MFR]OKAMOTO MACHINE TOOL WORKS

[Model]PSG-65DX

[Year]1990

T:650x500mm X:750 Y:540mm max work weight:700kg

{{ contactModal.id }}{{ contactModal.companyname }}{{ contactModal.title }}{{ contactModal.stockCode }}{{ contactModal.telephone }}{{ contactModal.inCharge }}
prevNext