Search Machinery

Lathes

SEARCH FILTER

1 ~ 50 of 219 POST

[MFR]

[Model]DLZ 630

[Year]

Max. work-piece diameter over bed: -Nominal: 630 mm -Max.: 660 mm Max. work-piece diameter over support: -At short slides: 400 mm -At long slides: 320 mm Max. work-piece diameter in a notch in front of a faceplate: 720 mm Length of a notch in front of a faceplate: 265 mm Height of centers: -Over bed: 305 mm -Over floor level: 1125 mm Bed width: 550 mm Working spindle bore: 72 mm Faceplate: -Diameter: 630 mm -Width: 120 mm Transversal section of the cutter: -Width: 40 mm -Height: 40 mm Side length of the tool holder: 200 mm Number of revs of the main electric motor: 1400 rpm Number of spindle speeds: 18 Max. allowable number of faceplate revs: 560 rpm Feeds: -Longitudinal feeds: -Number: 68 -Range: 0,035-10 mm/rev -Transversal feeds: -Number: 68 -Range: 0,014-4 mm/rev Speed of rapid stroke: -Longitudinally: 5000 mm/min -Transversely: 2000 mm/min Thread: -Step: -Number: 84 -Range: 0,2-224 mm -Inch: -Number: 94 -Range: 140-1/8 threads per inch -Module: -Number: 72 -Range: 0,1-112 -Pitch: -Number: 94 -Range: 280-1/4 Machine dimensions: -Length: 2300 (+ distance between centers) mm -Width: 1850 mm -Height: 1725 mm

[MFR]FRORIEP

[Model]8000

[Year]

Max. diameter of workpiece: 8000 mm Table diameter: 7500 mm Distance from center of table to column: 4100 mm Height of workpiece: 4000 mm Max. workpiece weight on the table: 120 tons Dimmensions: 13600x10500x10900 mm Machinery weight: 200 tons

[MFR]KOLOMNA

[Model]1532

[Year]1964

Table diameter: 3080 mm Workpiece dia. without support: 3200 mm Swing: 3400 mm Table speed: 0,6 - 31 rpm Max. workpiece height: 1600 mm Max. workpiece weight: 20 ton Vertical ram movement: 1500 mm Main motor power: 55 kW Machine dimension: 7000x4900x8950 mm Control desk dimension: 820x1050 mm Machine weight: 70 ton

[MFR]SEDIN

[Model]1531M

[Year]

Swing:φ1250 T:φ1120 Max working Dia:φ1250(With Ver carriage) φ1120(With side carriage) Max working height:1000 Weight:3200kg

[MFR]GRIRO

[Model]5x20000/2

[Year]1983

Table diameter: 5000 mm Working length: 20000 mm 2 supports Support is from 4 parts x 5000 mm 2 faceplates 3 guideway Max. loading weight: 90 tons Main motor: 80 kW Total machine weight: 200 tons Mechanical part is 100% complete and electrical box is not.

[MFR]KRAMATORSK

[Model]1A665

[Year]1963

Swing: 1650 mm Max swing with side head: 1550 mm Table diameter: 1450 mm Max working height: 1200 mm Table speed range: 2-200 rpm Max workpiece weight: 8000 kg

[MFR]SKODA

[Model]S2500x12000

[Year]

Turning diameter: at least 1600 mm Swing over bed: 1250 mm (diameter 2500 mm) Swing over support: 1000 mm (diameter 2000 mm) Centre distance (DBC): 12000 mm Bed width: 3000 mm Centre height: 1250 mm Spindle bore: 160 mm Stroke of quill: 160 mm Quill diameter: 320 mm Workpiece weight: 80 tons Outer clamping diameter: 1800 mm Min. clamping diameter: 200 mm Feed X: 0,06-19,2 mm/rpm Feed Z: (0,125-6) + (1-48) mm/rpm Power: 118 kW Operating voltage: 380 V; 50 Hz Rapid feed of carriage: 3000 mm/min Rapid feed of tailstock: 2300 mm/min / 1000 mm/min Machine dimensions: -Length: 19350 mm -Width: 4870 mm -Height: 2500 mm Weight: 146500 kg

[MFR]WAGNER

[Model]D 1500

[Year]

Control (3 axis X/Z/C): SIEMENS 840 D Turning diameter: 3000 mm Turning length 22300 mm Work-piece weight: 200 tons Speed: up to 60 rpm Motor power: 200 kW Railhead ram 3 rams with motor measuring system & ball screw spindle 2 boring bars (Max. boring length: 8900 mm) Boring guide bearing 2 roller blocks 3 steady rests Finish Aggregat

[MFR]KRASNYJ PROLETARIJ

[Model]16K20

[Year]1979

Max. processing diameter over bed: 400 mm Max. processing diameter over support: 220 mm Max. processing diameter in recess of bed: 400 mm Max. distance between centers: 1000 mm Max. work-piece weight: 900 kg Front end of spindle according to DIN: 6�K Diameter of cylindrical spindle bore: 55 mm Size of conical spindle bore: Morze 6 Number of spindle rotation speeds: 23 Working range of revs: 12,5-1600 rpm Main drive motor power: 10 kW Max. grinding length: 1335 mm Number of feeds: 42 Longitudinal feeds range: 0,05-2,8 mm/rev Transversal feeds range: 0,025-1,4 mm/rev Metric thread: 0,5...112 mm Inch thread: 56...0,5 Modular thread: 0,5...112 Pitch thread: 56-0,5 Sleeve stroke: 200 mm Dimensions (LxWxH): 3195x1198x1500 mm Machine weight: 3335 kg

[MFR]HARDINGE

[Model]HLV-H

[Year]1976

Spindle Capacity: Round 5C Collets..................1-1/16" Hexagon 5C Collets................7/8" Square 5C Collets.................3/4" Step Chuck........................6" Jaw Chuck.........................5" Expanding Collets.................3" Swing Over Bed....................11" Swing Over Cross Slide............9" Distance Between Centers..........18" Spindle Bore......................1-1/4" Spindle Speeds....................125 - 3,000 RPM (Variable) Carriage Feed Range...............5/16 - 7 IPM Cross Slide Feed Range............3/16 - 4 IPM Compound Travel...................3" Cross Slide Travel................5-1/2" Inch Threading....................(36) 11 - 108 TPI Metric Threading..................(35) 0.4375 - 2.7 mm Electrics.........................460v 3 Phase Dimensions........................72" x 29" x 66" 2,500 Lbs

[MFR]BIRMINGHAM

[Model]YCL-1236GH

[Year]

Swing Over Bed........................ 12" Max Swing in Gap: .................... 17" Effective Length in Gap: ............. 5" Width of Bed: ........................ 7-1/4" Distance Between Centers.............. 36" Spindle Nose: ........................ D1-4 Spindle Hole.......................... 1-1/2" Spindle Drive......................... 1.5 HP Spindle Speeds........................(9) 70 - 1400 RPM Electrics.............................220v 1ph Control: 2 Axis Newell DP700 Digital Read Out Equipped With: Inch Metric Threading Digital Readout (Option) 5C Collet Closer (Option) 6" 3 Jaw Chuck 8" 4 Jaw Chuck 3-3/4" Steady Rest 10" Face Plate Tailstock Factory Tool Kit 4 Way Tool Post Thread Chasing Dial Center & Sleave Full Length Splash Guard

[MFR]CLAUSING

[Model]1301

[Year]

Swing Over Bed: ............. 13" Distance Between Centers: ... 36" Spindle Hole: ............... 1-1/2" Equipped With: Tailstock 8" 3 Jaw Chuck

[MFR]NARDINI

[Model]MS-1440E

[Year]

Swing Over Ways ..................... 14" Swing Over Cross Slide .............. 8" Swing In Gap ........................ 20" Spindle Speeds ...................... (18) 25 TO 2000 RPM Feeds ............................... (132) 0.0021 TO 0.0976 IPR Threading Metric..................... (54) 0.40 TO 18.472 MM Threads English ..................... (54) 3 TO 56 TPI Diameter Of Spindle Hole ............ 1-3/4" Chuck ............................... 8" 3 JAW Equipped with: Thread & Travel Dials Spindle Forward And Reverse Follow Rest Steady Rest Coolant Hardened Ways Spindle Motor 5 HP

[MFR]GUANG ZHOU

[Model]C6232A

[Year]

Brand: Guang Zhou Model: C6232A

[MFR]TA SHING

[Model]TSN-2000

[Year]

Used Taiwan "Ta Shing" Model: TSN-2000 Lathe. Chuck: 1,000mm. Swing Over: 1,400mm. Bore: 100mm, Working Length: 2,000mm.

[MFR]

[Model]

[Year]

Used Japan face lathe φ1200*1200 Gapφ1600 Bed width: 750 Bed length: 2500 φ1200 4jaw independent chuck 5~350rpm 12step Bore: φ52 Motor: 11Kw Tail stock: MT-6

[MFR]ACME

[Model]1"RAN-6

[Year]1981

Air trip thread Pickoff Back finish Universal chip Acme sound encosure

[MFR]ACME

[Model]1"RAN-6

[Year]1969

New spindle bearings Air trip thread Pickoff Back finish Universal chip

[MFR]ACME

[Model]1-1/4"RA-6

[Year]1992

New Logan Threading Pickoff Back finish Universal conveyor New Plexiglas

[MFR]ACME

[Model]1-1/4"RA-6

[Year]1975

Spindle Stop Cross drilling Pickoff 5 slide Universal conveyor Plexiglas

[MFR]ACME

[Model]1-1/4"RA-6

[Year]1974

Logan Threading Air Pickoff Back finish Universal conveyor Plexiglas

[MFR]ACME

[Model]1-1/4"RA-6

[Year]1968

Air trip Threading Reaming 5 slide Universal conveyor Plexiglas

[MFR]ACME

[Model]1-1/4"RB-8

[Year]1969

Air trip 5th Pickoff Back finish 3rd Shelf Univ Chip New plexiglas

[MFR]ACME

[Model]1-1/4"RB-8

[Year]1962

3rd Shelf 6th Shelf Threading Hi-speed drilling Univ Chip New plexiglas

[MFR]ACME

[Model]1-1/4"RB-8

[Year]

Logan threading 5th Reaming Shelf 3rd & 6th Univ.chip New plexiglas

[MFR]ACME

[Model]1-5/8"RB-6

[Year]1956

Pneumatic threadind 4th Reaming 5 slides univ. conveyor Plexiglas

[MFR]ACME

[Model]1-5/8"RB-8

[Year]

1975 to 1955(4) Threading Shelf slides 3 & 6 Pickoff Back finish Univ. conveyor Plexiglas

[MFR]ACME

[Model]2"RB-6

[Year]1982

Pneu.threading Electrionic stock dcp univ. conveyor plexiglas

[MFR]ACME

[Model]2"RB-8

[Year]

1974 & 1969 Thrading 3rd & 6th shelf Accel ream Univ. conveyor Plexiglas

[MFR]ACME

[Model]2-5/8"RB-6

[Year]1975

(2) Threading Hi-speed drill Reaming 5 slides Univ. conveyor Plexiglas

[MFR]ACME

[Model]2-5/8"RB-8

[Year]1995

Thread 5th Reaming Shelf slides 3rd & 6th Univ. conveyor Plexiglas

[MFR]ACME

[Model]3/4"RA-8

[Year]1975

Will equip as needed Shelf's 3&6th Universal chip Plexiglas

[MFR]ACME

[Model]4"RB-6

[Year]1979

Reaming 5 slides Univ. conveyor Plexiglas

[MFR]ACME

[Model]5-1/4"RAC-6

[Year]1997

Threading Univ. chip Plexiglas Still on original pallet

[MFR]ACME

[Model]5/8"RN-6

[Year]1969

Threading Pickoff Back finish Universal Chip Plexiglas

[MFR]ACME

[Model]6"RPA-8

[Year]1974

4 slides 3 jaw chucks Reccessing Rcaming

[MFR]ACME

[Model]7/16"RA-6

[Year]1995

Pickoff Back finish plex guards

[MFR]ACME

[Model]7/16"RA-6

[Year]1971

Pneumatic threading Pickoff Back finish plex guards

[MFR]ACME

[Model]7/16"RA-6

[Year]

1960's(3 machines) Reconditioned 5-slids

[MFR]ACME

[Model]9/16"RA-6

[Year]1955

Flat toolslide Spdl stop Slotting Cross drilling Plexigas

[MFR]ACME

[Model]9/16"RAN-6

[Year]1970

Air trip Thd 4th Pickoff Univ.conveyor Accro feed avail

[MFR]NEW BRITAIN

[Model]1"Model 51

[Year]1979

(3) Threading Pickoff Back finish Univ. chip 1 with new spindle bearings

[MFR]NEW BRITAIN

[Model]1-3/8" Model 52

[Year]1979

Threading Pickoff Back finish Univ. chip new spindle bearings

[MFR]MORANDO

[Model]KL14

[Year]

TABLE ? 1.450 MM. MAX. WORKING ? 1.650 MM. MAX. WORKING HEIGHT 1.200 MM. TABLE MOTOR POWER (D.C.) 37,8 KW. MAX. WEIGHT ON TABLE 8 TONS. TABLE SPEEDS 2,22 �� 200 RPM. N. 1 RAM TYPE VERTICAL TOOL: - VERTICAL TRAVEL 1.000 MM. - SWIVELLING 35�� N. 1 RAM TYPE VERTICAL TOOL WITH GRINDING UNIT: - VERTICAL TRAVEL 1.000 MM. - SWIVELLING 35�� N. 1 SIDE TOOL TOTAL WEIGHT 22 TONS

[MFR]SEDIN

[Model]1M557

[Year]

Swing: 3200 mm Table diameter: 2800 mm Working height: 1600 mm Max. work-piece weight: 16 tons Main motor: 55 kW Weight: 45 tons

[MFR]STROHM

[Model]M125

[Year]

Material gr forward approximately 12.7 mm square 9 mm hexagonal 11 mm gr turning length 100 mm Number of side cutters 5 20 speed ranges 1120-10000 rpm work spindle speeds 0,109-53,45 rpm weight 850 kg

[MFR]STROHM

[Model]M125

[Year]

Material gr forward approximately 12.7 mm square 9 mm hexagonal 11 mm gr turning length 100 mm Number of side cutters 5 20 speed ranges 1120-10000 rpm. 83 Qty. d. work spindle speeds 0,109-53,45 rpm weight 850 kg

[MFR]STROHM

[Model]M125

[Year]

Material gr forward approximately 12.7 mm square 9 mm hexagonal 11 mm gr turning length 100 mm Number of side cutters 5 20 speed ranges 1120-10000 rpm. 83 Qty. d. work spindle speeds 0,109-53,45 rpm weight 850 kg

[MFR]STROHM

[Model]M125

[Year]

Material gr forward approximately 12.7 mm square 9 mm hexagonal 11 mm gr turning length 100 mm Number of side cutters 5 20 speed ranges 1120-10000 rpm. 83 Qty. d. work spindle speeds 0,109-53,45 rpm weight 850 kg

[MFR]TORNOS

[Model]MS7

[Year]

maxi bar diameter : 10 [mm] - number of turning tools : 5 - headstock stroke : 60 [mm] - spindle speed : 12 000 [rpm] - dimensions : 1440 x 900 [mm] - weight : 700 [kg]

{{ contactModal.id }}{{ contactModal.companyname }}{{ contactModal.title }}{{ contactModal.stockCode }}{{ contactModal.telephone }}{{ contactModal.inCharge }}
prevNext