5-axis / 7-axis CNC Twin Spindle Turning and Milling center Okuma Multus U3000 1SW 1500 Year of manufacture 2021 CNC control OSP P300SA IGF-D 400 spindle hours Swing diameter over slide 650 mm Turning length 1500 mm Main spindle: Bar capacity 81 mm Spindle drive motor 15/22 kW Spindle speeds up to 4200 rpm Chuck diameter 250 mm C axis 0.0001° Counter spindle: Bar capacity 81 mm Spindle drive motor 15/22 kW Spindle speeds up to 4200 rpm Chuck diameter 250 mm C axis 0.0001° Tool support: Single tool carrier in the work area Tool for turning (L) and milling (M) CAPTO C6 tool holder Tool drive motor (milling/M) 19/25 KW Tool speeds (milling/M) 50 - 12000 rpm Tool magazine and automatic tool changer Tool positions - 80 times Axis/travel paths: X facing travel 645 mm Z longitudinal travel 1600 mm Y vertical travel (off-center) 250 mm B Swivel range 240° (0.0001°) C1 (spindle left) 360° / 0.0001° C2 (spindle right) 360° / 0.0001° W Counter spindle longitudinal travel 1594 mm Complex complete processing at high speed for small to medium batch sizes: The Okuma MULTUS combines the advantages of lathes and vertical centers. For optimal stability and damping, all linear guides are equipped with cylindrical rollers. The Thermo-Friendly concept ensures high dimensional stability - even when the ambient temperature changes. This MULTUS U3000 is a multitasking machine with automatic tool changer and counter spindle. This 10-inch feed class machine has a wide range of machining features and is the embodiment of power, speed and process flexibility. With this machine you can do the work in one setup and with free tools in the ATC. The MULTUS U3000 has a B-axis range of 240° with a 12,000 rpm H1 milling spindle with dual function (L/M). The H1 dual function spindle head uses CAPTO C6 tools and has a high performance 25kW milling motor spindle. The H1 turret features a 0.001 degree B-axis, provided by a moving column Y-axis feed, enabling powerful Y-axis machining over a 250mm range. Both the left and right spindles are equipped with a fully contoured C-axis. Thanks to the OSP-P300 control, familiar programming methods from the lathe and machining center disciplines can be easily combined, so that advanced functions such as the “Collision Avoidance System” are standard. Proposal Number L-4890

4-Axis Horizontal Machining Centre DMG Mori NHX 5500 Gen 2. Year of manufacture 2019. Fanuc 31iB + Celos. 4-Axis. Two station pallet changer 500 x 500 mm. NC-Rotary Table B-Axis 0.001°. X 800 mm. Y 800 mm. Z 800 mm. Feeds 0 - 60000 mm/min. Spindle drive motor rating 30/55 KW. Spindle speeds to max. 12000 rpm. Spindle taper BT 50. 100 station tool magazine. High Torque ! Linear scales. Coolant through the spindle 70 bar. Low hours. Proposal Number MH-6402

CNC Lateral Milling Machine – Milling & Turning Soraluce FS-16000 Year of manufacture 2016 CNC Siemens 840D SL control Travelling Column Machine With rotary travelling table for milling With rotary travelling table for turning and milling With automatic indexing head With horizontal milling head With 2-Spindle Turning head for external diameter turning With head for internal turning With head changer in pick-up method With automatic tool changer in horizontal and vertical positions X 16000 mm Y 3200 mm Z 1600 mm Rotary and Travelling table for milling.Table size 2500 x 2500 mm Rotary and Travelling table for TURNING & MILLING. Table diameter 3000 mm Universal indexing milling head Horizontal milling head Orthogonal head with 2 x spindles for external turning Vertical head for internal turning 120 station tool magazine …and much more ! Proposal Number V(F)-6976 Interested? Contact us for a price quotation with more data and photos.

5-Axis Vertical Machining Centre DMG DMU 50 eVo linear Year 2006 Heidenhain MillPlus IT 2-Axis NC Rotary Swiveling Table: Table size: 500 x 380 mm Table loading capacity: max. 200 kg Working traverses: Longitudinal travel: X 500 mm Cross travel: Y 450 mm Vertical travel: Z 400 mm Table rotational axis: C 360° / 0.001° Table swivelling axis: B +90°/-18° ~ 0.001° Cutting feeds: X,Y,Z 20000 mm/min. Rapid traverse Linear Drive: X 80000 mm/min. Rapids traverses: Y, Z 50000 mm/min. C/B 50 / 40 rpm Spindle: Spindle motor rating: 40%/100% 35 / 25 KW Spindle speeds: 20 - 18000 rpm Spindle torque: 40%/100% 130 / 87 Nm Tool magazine & Automatic Tool Changer: Tool magazine positions: 120 station Tool taper: HSK-A63 Tool diameter all pockets full: max. 80 mm Tool diameter adjacent pockets empty: max. 130 mm Tool length: max. 300 mm Chip to chip time: 5 sec Machine weight: approx. t.b.a. kg Machine size: L x W 6050 x 3140 mm Equipped with: Direct measurement systems X,Y,Z,C,B Axes. Linear drive X-Axis. ATC with double gripper arm. Tool taper HSK-A63. Tool taper cleaning system. Tool measurement laser for diameter and length. Infra red Heidenhain probe TS 640 for parts measurement. Electric handwheel. NFS Server Software. Operation mode 4. Condition: Good condition. Proposal Number MV-5764

Vertical 5-Axis Machining Centre with 6-station Pallet pool Hermle C42U Year 2013/2014 Heidenhain iTNC 530 CNC 2-Axis NC Rotary / Swivelling Table: Table rotary axis: C 360° Table swivelling axis: A +130° / -130° Number of pallets: 6 pallets in the system Pallet clamping surface: 400 x 400 mm Pallet loading capacity: max. 450 kg Longitudinal travel: X 800 mm Cross travel: Y 800 mm Vertical travel: Z 550 mm Rapids up to: X/Y/Z 45000 mm/min. Rapids: C-Axis 65 rpm Rapids: A-Axis 25 rpm Spindle motor rating: 10 / 20 KW Spindle speeds: 20 - 18000 rpm Spindle torque: max. 180 Nm Tool magazine and automatic tool changer: Tool magazine positions: 85 (42 ATC + 43 additional magazine) Tool taper: HSK-A63 Tool diameter with/without adjacent tools: max. 90 / 125 mm Tool length: max. 300 mm Tool weight: max. 8 kg Chip to chip time: 4.5 sec. Equipped with: Full 5-Axis simeltaneous milling with 2-Axis NC-Rotary Table. 6 station pallet pool and automatic pallet changer. 85 station tool magazine amd automatic tool changer. Full guarding. Coolant unit. High pressure coolant through the spindle 80 bar. Paper band filter. BLUM Laser tool measurement and tool breakage control. Measuring probe. Direct measurement linear scales X,Y,Z. Chip conveyor. Machine is very well looked after. Machine holding very tight tolerances. Spindle was replaced with a new spindle in 2019. The new spindle has very low running hours. Proposal Number MV-6375

Vertical 5-Axis Machining Centre – Mill-/Turn Centre Stama MC726/MT – Milling / Turning – from billet Year 2008 Siemens Sinumerik 840D sl CNC 2-Axis NC Rotary / Tilting table with collet chuck Clamping capacity 15 ~ 80 mm diameter C-Axis 360° A-Axis 120° X 500 mm Y 380 mm Z 360 mm 42 station ATC Turning spindle 20/50KW / 4000 rpm Milling spindle 17/37 KW / 10500 rpm 2 x machines available as a machining cell or individual machines sale They are currently connected in a production line. Both machines have their own chip conveyor, but they have only one coolant tank with different coolant pumps. Under power in the factory. Both machines are well maintained and in perfect condition. Regular maintenance carried out by Stama up to 2021, since then only low utilization. ALSO AVAILABLE AS SINGLE MACHINE ! Equipped with a Promot Gantry loader and parts conveyor Linear scales Internal coolant through spindle 70 bar Renishaw measuring probe Signal lamp Chip conveyor KNOLL coolant unit Proposal reference MV-6363 / Proposal reference MV-6389

CNC Bed Type Milling Machine (Lateral) SHW Uniforce 6L Year 2001. OVERHAULED by SHW in 2017. Heidenhain TNC 430M. Travels: X 6000 mm. Y 2600 mm. Z 1500 mm. Spindle: ISO 50. 37/53 KW. 4000 rpm. Head: Universal Milling Head 340 x 1° / 180 x 1°. 66 station tool changer. Proposal Number V(F)-6895

CNC Floor Type (Ram Type) Boring & Milling Machine Fermat WRF-160 CNC Year 2013 Heidenhain iTNC 530 X 9000 mm. Y 7300 mm Table 3000 x 4000 mm. B 360°. V 3000 mm. 80t. Equipped with: Rotary table with 2 x pinions and 2 servo motors. B-Axis rotary scale and encoder. Pick up station for 4 positions for 3 heads. Universal milling head UHAmi 30 micro positioning head. Automatic right angle head PHA37, 2.5° positioning. Special right angle head with A-Axis positioning. Tool change robot. Coolant through the spindle to 50 bar adjustable with M-Function. M+H probe. Very good condition.

CNC Floor Type (Ram Type) Boring & Milling Machine Fermat WRF-160H CNC Year 2017 Heidenhain iTNC 530 X 9600 mm. Y 4500 mm Table 2500 x 3500 mm. B 360°. V 2400 mm. 50t.

CNC Double Column Coordinate Boring and Milling Machine With Deep hole drilling support Kolb KBN G 120 Milling / Boring support & second support independent NC Controlled Deep Hole Drilling Unit Heidenhain TNC 426 control Table size 2200 x 3240 mm Table load 14 t Traverses : X 3000 mm Y 2180 mm Z 500 mm W 1000 mm (cross rail) Heavy duty milling and boring spindle, ISO 50 , 46 KW , 1400 rpm Extra deep hole drilling unit (Independent Z NC-Axis) - Drilling capacity Ø 10 mm ~ Ø 30 mm x 500 mm depth ! Super machine with a lot of tooling BEST CONDITION! Proposal Number V(B)-5234