CNC Lathes Product list for Sale

Search Machinery

101 ～ 150 of 206 POST

◆Control device: OSP-E100L ◆Swing above bed: Φ530 ◆Swing above carriage: Φ530 ◆Center distance: 300 ◆Maximum machining diameter x length: Φ230＊300 ◆Travel: X180, Z335 ◆Spindle rotation speed: 50-6000 ◆Spindle speed conversion number: Automatic 2-stage (VAC motor winding switching) ◆Spindle end: Flat Φ140 ◆Spindle through hole diameter: Φ53 ◆Spindle diameter: Φ80 ◆Tool rest type: V12 NC tool post ◆Number of tools mounted on tool post: L12 ◆Shank height of square tool: 20 ◆Diameter of boring bar shank: Φ32 ◆Tool post indexing time: 0.1 (index) ◆Fast forward speed: X25, Z30 ◆Cutting feed speed: XZ0.001-1,000 ◆Tailstock diameter: Φ55 ◆Tapered hole type of tailstock: MT.No.4 ◆Tailstock travel distance: 80 ◆Spindle motor: VAC 7.5/5.5 ◆Feed shaft motor: X, BL3/Z, BL4 ◆Cutting fluid motor: Side chip discharge 0.25, rear discharge 0.8 ◆Required power supply: 16 ◆ Easy dialogue included ✤If there is a difference between the specifications and the actual product, the actual product will take priority.

Main unit model: LB3000EXⅡ Specification development: MY C450 OSP:OSP-P300L Distance between centers: 470 Maximum processing diameter: Φ340 Maximum processing length: 450 X-axis: 260 Z-axis: 510 Y-axis: 120 (+70 to -50) C-axis: 360 (rotary axis control angle 0.001) Travel amount: 515 Spindle size: Standard spindle (A2-6) 45~5000min-1 Headstock motor (standard spindle): VAC22/15kw (30 minutes/continuous) Turret (compound machine): compound V12 radial Tailstock indicator taper type: Dead type MT No.5 Tailstock movement method: NC tailstock Rotary tool spindle (compound machine): 6000min-1 PREX7.1/4.1kw 40.4Nm M/MY machine chucking kit: BB kit Hollow chuck BB208A: including SS1770 ◆OSP kit OSP Easy Dialogue Advanced M-D Arc thread cutting function Programmable message function Coordinate transformation Creative processing Easy dialogue advanced L complex: including real 3D Cycle time over check Load monitor function (spindle feed axis) Tool life management function NC operation monitor (including NC counter) Status indicator light: 3-stage C type Operation time reduction function Hi-cut Pro Spindle rotation speed fluctuation control ◆OSP individual Program store capacity: 2GB or more guaranteed (standard) Operation buffer capacity: 2MB or more guaranteed (standard) Spindle fixed position stop Electric type Environmental thermal displacement control (TAS-C) Z-axis automatic origin offset Helical cutting function anti-crash system DNC-DT Automatic power cutoff function MO2/Alert Pitch error correction function Earth leakage cutoff function Processing navigation: L-g (including microphone and conversion plug) ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

Controller : OSP-P300SA-H Swing on carriage : φ600 mm Center distance : 750 mm Maximum machining diameter : φ600 mm Maximum workpiece weight (including chuck weight) Cantilever support : 110 kg/ Double center support : 500 kg 　　　 Travel X : 500 Y : 200 Z : 800 mm 　　　 B : 225°(0.001°increments) 　　　 C : 360°(0.001°increments) Spindle speed : 4,200 rpm Spindle tip : JIS A2-6 Tool rest type : H1 (1 for L (turning) and M (rotating tool)) 　　　 Rotating tool speed : 50 ～ 12,000 rpm Tapered hole of tailstock : MT.No5 dead Travel of tailstock : 810 mm Tooling : HSK-A63 Magazine tool storage capacity : 40 stations 　　　 Required floor space : 3,190 x 2,210 mm 　　　 Height : 2,582 mm Net weight : 7,900 kg Chuck B-210 (Kitagawa hollow chuck) 　　　 Touch center (for tools) Touch sensor (for workpiece) Renishaw RMP60 　　　 Easy dialogue advice Periodic tapping DNC-TI Helical cutting Tilted machining mode Chip conveyor (front right output)

Turn mill center OKUMA Multus B400 TECHNICAL CHARACTERISTICS: CNC control: OSP-P200L Distance between centers: 1500 [mm] Max. cutting diameter: 710 [mm] Height of centers over cariage: 710 [mm] Stroke X axis: 690 [mm] Stroke Y axis: -115 / +115 [mm] Stroke Z axis: 1545 [mm] Stroke W axis: 1550 [mm] B axis indexing precision: 0.001 [°] Milling head max. speed: 6000 [rpm] Max. milling spindle power: 11 [kW] Max. milling spindle torque: 65.7 [Nm] Coolant milling head: HSK-A63 Tool magazine capacity: 40 Max. tool length: 300 [mm] Max. tool diameter: 130 [mm] Max. weight of single tool: 10 [Kg] Rapid traverse rate X axis: 4000 [mm/min] Rapid traverse rate Z axis: 40000 [mm/min] Rapid traverse rate Y axis: 26000 [mm/min] Rapid traverse rate W axis: 12000 [mm/min] Spindle nose: JIS A2-8 Min. spindle speed: 38 [rpm] Max. spindle speed: 3800 [rpm] Increment C-axis: 0.001 [°] Supply voltage: 400 [V] Weight: 14000 [Kg] INCLUDED EQUIPMENT: 1 × One-Touch IGF software option 1 × ATLING 2-point steady rest, type AX8I-NAOS (Ø85–360 mm) 1 × SMW AUTOBLOK 3-jaw chuck Ø340 mm, type KNCS-N-340-117 1 × Chuck clamping pressure regulator 1 × Parts catcher 1 × NC tailstock 1 × MARPOSS T18 tool probe 1 × Remote electronic handwheel 40 × HSK-63 tool holders 1 × 2-color status signal lamp 1 × Chip conveyor 1 × Coolant tank 1 × Transformer 1 × Complete set of manuals + OKUMA CD Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to brands such as Mazak, DMG Mori, Index Traub, Doosan, Hermle, Chiron, and Biglia. Also includes lathes, mill-turn machines, and milling machines.

Control：OSP-P300S (Advanced One-touch IGF) Chuck:12”Hollow (Kitagawa B-212A8)、Spindle speed: 3800min Max. Turning Dia×Length：φ710×1500 Travel:ZXYCB: 1,545x690x230x360° x225° W-Axis(NC Tailstock)：1,550 Milling spindle: 10,000rpm、HSK-A63、ATC40 Milling spindle and C-axis: 0.001° ・Milling spindle Through spindle coolant ・High-Pressure coolant unit(7Mpa) ・Tool pre-setter(M) ・Door Interlock Ⅱ ・Steady rest(φ20~φ150) ・Chip-conveyor &bucket ★ Actual products shall prevail over any description in case of discrepancy.

5-axis / 7-axis CNC Twin Spindle Turning and Milling center Okuma Multus U3000 1SW 1500 Year of manufacture 2021 CNC control OSP P300SA IGF-D Swing diameter over slide 650 mm Turning length 1500 mm Main spindle: Bar capacity 81 mm Spindle drive motor 15/22 kW Spindle speeds up to 4200 rpm Chuck diameter 250 mm C axis 0.0001° Counter spindle: Bar capacity 81 mm Spindle drive motor 15/22 kW Spindle speeds up to 4200 rpm Chuck diameter 250 mm C axis 0.0001° Tool support: Single tool carrier in the work area Tool for turning (L) and milling (M) CAPTO C6 tool holder Tool drive motor (milling/M) 19/25 KW Tool speeds (milling/M) 50 - 12000 rpm Tool magazine and automatic tool changer Tool positions - 80 times Axis/travel paths: X facing travel 645 mm Z longitudinal travel 1600 mm Y vertical travel (off-center) 250 mm B Swivel range 240° (0.0001°) C1 (spindle left) 360° / 0.0001° C2 (spindle right) 360° / 0.0001° W Counter spindle longitudinal travel 1594 mm 659 hours / 355 spindle running hours The machine is basically like new Complex complete processing at high speed for small to medium batch sizes: The Okuma MULTUS combines the advantages of lathes and vertical centers. For optimal stability and damping, all linear guides are equipped with cylindrical rollers. The Thermo-Friendly concept ensures high dimensional stability - even when the ambient temperature changes. This MULTUS U3000 is a multitasking machine with automatic tool changer and counter spindle. This 10-inch feed class machine has a wide range of machining features and is the embodiment of power, speed and process flexibility. With this machine you can do the work in one setup and with free tools in the ATC. The MULTUS U3000 has a B-axis range of 240° with a 12,000 rpm H1 milling spindle with dual function (L/M). The H1 dual function spindle head uses CAPTO C6 tools and has a high performance 25kW milling motor spindle. The H1 turret features a 0.001 degree B-axis, provided by a moving column Y-axis feed, enabling powerful Y-axis machining over a 250mm range. Both the left and right spindles are equipped with a fully contoured C-axis. Thanks to the OSP-P300 control, familiar programming methods from the lathe and machining center disciplines can be easily combined, so that advanced functions such as the “Collision Avoidance System” are standard. Proposal Number L-4890

Control unit : OSP-P500S Swing over saddle (Upper/ Lower turret): φ650 mm/φ320 mm Max. machining dia.: Upper φ650 mm/ Lower φ320 mm Maximum machining length: 1,500 mm Maximum workpiece weight (including chuck) Cantilever support: 118–335 kg Between centers: 620 kg Travel Upper tool turret: 　　　 X : 695 Y : 300 mm (±150) Z : 1,600 mm 　　　 B‑axis: 30°–210° (indexing 0.001°) Travel Lower tool turret: 　　　 X : 235 Z : 1,524 mm 　　　 C‑axis: 360° (indexing 0.0001°) W: 1,524 mm 　　　 Spindle speed : 45～4,200 rpm Spindle tip : JIS A2-８ Main spindle through‑hole diameter: φ91 mm Opposed spindle speed: 38～3,800 rpm Opposed spindle nose: JIS A2‑8 Opposed spindle through‑hole diameter: φ80 mm 　　　 Turret type: Upper: H1 (shared for L/M)　　Lower: V12 　　　 Tool storage capacity: 40 tools Tool spindle speed (upper): 50～12,000 rpm Tooling interface: HSK‑A63 Required floor space : 5,425 × 3,082 mm Height : 3,030 mm Net weight : 18,000 kg ≪Options≫　　　　　 Main spindle: D230 2J COMP (Teikoku Chuck) 　　　 Opposed spindle: FD‑215 (Teikoku Chuck) Hydraulic cylinders: Main / Opposed – SIN‑L125 (SMW) SMW special steady rest (mounted on lower turret) Coolant circuit: Upper turret through‑spindle, low pressure 　　　 Tool turret air blow: 　　Upper: shared with HI coolant (through during L/M rotation/ outer circumference) 　　Lower: combined with coolant nozzle 　　　 In‑machine work measurement: RMP60 (Renishaw) 　　　 Tool setter Work support rest (mounted on lower turret) 　　　 Easy conversational advice function Cycle tapping DNC‑TI Helical cutting Inclined machining mode Chip conveyor (front right discharge)

Manufacturer & Model OKUMA MX-55VA Condition: Used Year: 1998 Stock Number: 54679 Travel: • X-axis: 41.3” • Y-axis: 22” • Z-axis: 17.7” Table Size: 22” x 51.2” Table Surface to Floor Level: 31.5” Load Capacity: 1540 lbs. Spindle: • Speeds: 50 - 7000 RPM • Taper: 40 • Main Spindle Drive Motor: 10 HP • Diameter at Front Bearing: 2.8” Feedrate: • X, Y, Z-axis Cutting Feedrate: 393 IPM • X, Y-axis Rapid Feedrate: 1417 IPM • Z-axis Rapid Feedrate: 1181 IPM ATC (Automatic Tool Changer): • Tool Shank: 40 • Max. Tool Diameter with Adjacent Tools: 3.5” • Max. Tool Diameter without Adjacent Tools: 4.9” • Max. Tool Length: 15.75” • Max. Tool Weight: 17.6 lbs.

Control unit: OKUMA OSP‑E100L Max swing: φ530 mm Swing over cross slide: φ420 mm Distance between centers: 300 mm Max work dia. × max work length: φ230× 300 mm Travel (X, Z): 180 × 335 mm C: 360° (rotational control angle 0.001°) Max spindle speed: 50～6,000 rpm Spindle through‑hole dia.: φ53 mm Turret type: 12‑station composite quick‑change type (shared for L/M) Tailstock quill travel: 80 mm Rotary Tool Speed: 100～6,000 rpm Required floor space: 2,035 × 1,720 mm Machine height: 1,700 mm Machine weight: 3,300 kg 6‑inch 3‑jaw hydraulic chuck B‑206 (Kitag Touch setter Easy conversational programming Synchronized tapping

Control device：OSP-P200LA RAKURAKU Advance L composite LAP-4 φ2400*1200h φ2000 placed jaw chuck 5-200rpm 30Kw S: X1600*Z1200 C axis indexing angle 0.001° Mill Axis：4500rpm BBT-50 15Kw ATC-60 Absolute Scale X-Y Axis MILL Axis Through Spindle Coolant Touch setter Synchronous tapping Main spindle ultra-low speed cutting function Target seat exchange Generative machining Arc threading function　 Program store: 2 GB User task 2 Coolant tank 1000ℓ Cutting oil temperature control Chip conveyor Oil skimmer Tooling set

Controller: FANUC-18iTB Maximum swing: φ2,400 mm Maximum machining diameter: φ2,000 mm Maximum machining length: 1,400 mm Maximum workpiece weight (including chuck weight): 7,000 kg 　　　 Cantilever support : 110 kg/ Double center support : 500 kg 　　　 Travel X: 1,600 Y: ±800 Z: 1,400 mm 　　　 B: 120° (-15° to 105°) 　　　 C: 360° (0.001° indexing) B-axis spindle NC indexing (0.001° index, 5° index combined) 　　　 Chuck rotation speed: L (low speed): 4 ～200 rpm H (high speed): 6 ～ 400 rpm 　　　 Tool rest type : H1 (1 for L (turning) and M (rotating tool)) Tool spindle speed (M-axis): 4,000 rpm Tooling: BBT50 (BIG PLUS) Magazine tool storage capacity: 36 tools Tool post type: ATC single tool Required floor space: 6,193 x 7,325 mm Height: 4,745 mm Machine weight: 35,000 kg (excluding chuck) 　　　 Controlled Axes: 5 axes (X, Y, Z, B, C) (3 axes controlled simultaneously, excluding B) 　　 φ2,000 mm 4-jaw indented chuck (jaw lock) B-axis angled indexing for turning (indexing every 5°) M-axis spindle center through coolant: 1.5 Mpa X, Y, Z, and B-axis scale feedback Automatic cutting edge measurement (automatic ATS) by Renishaw 　　　 Touch probe for workpiece measurement by Renishaw Hinged‑belt chip conveyor (left side discharge) Automatic door for workpiece removal 　　　 Tape storage capacity: 1280 m Chamfering, corner radius 　　　 Helical interpolation 　　　 Data server: 1 GB Spare M-codes: 4

OSP-P200L φ710*1500 Main KITAGAWA B-210 hollow chuck　3800rpm　22Kw Sub KITAGAWA B-210 hollow chuck　3800rpm　22Kw Bore: φ80　 H1-ATC turret　 Bite □25　 Mill-6000rpm　 HSK-A63 ATC-120　 Chuck jaw open & close in rotation S:X690*Z1545*Y230*W1550 C-360°　B-0.001 Abso scale X Z Y axis　 Touch setter High pressior coolant 7MPa　 Coolant temareture control　 Spindle position stop　 Super Nurbs XYZ+C B axis slant cutting　 Arc thred cutting　 Helical cutting Coordinate tranceformation　 Program store 2GB　

TCF-200 CNC 3-guideway bed width 1500mm Swing over bed:2000mm Turning dia.(swing over carriage):1600mm Dia.of 4-jaws chuck:1600mm Centre distance:9000mm Load carrying capacity with one steady:35000kg with two steadies:40000kg Load carrying capacity in the chuck:4000kg 3.2 Headstock Spindle taper size 1:10 Spindle bore:105mm Range of revolutions (infinitely variable adjustment) 0.5-250rpm Number of speed ranges number 3 Main motor power 81kW Maximal spindle torque Nm 40000 3.3 Carriage Version 3/2 ? carriage set up on the 2guideway passing the tailstock Length of the saddle 1320mm Rapid travel in Z axis 6000mm/min Rapid travel in X axis 4000mm/min Longitudinal travel turning length Transversal travel 700mm Diameter of X ball screw ��63x10mm Drive of Z axis double pinion ? spring preload zero backlash rack drive 3.4 Tailstock Quill diameter �� mm 280 Quill travel out mm 200 3.5 Overall diameters and other data of the lathe Length mm 3550+turning length Offer No. AR/047/M/08/16 dated 30.08.2016 POREBA Heavy duty CNC lathe type TCF-200 x 6m ____________________________________________________________________________________________ 4 4 STANDARD EXECUTION 4.1 swing diameter over bed - �� 2000; 4.2 swing over carriage �� 1600 4.3 three guideway bed 4.4 turning length 6 m; 4.5 4 -jaw chuck �� 1600; 4.6 carriage supported on two guideways passing the tailstock 4.7 main motor power - 71 kW (continuous operation); 4.8 spindle revolutions 0.5-250 rpm; 4.9 power supply 3x400/50 Hz; 4.10 Sinumerik 840D sl operate ? included Siemens RSC ;4.11 tooling system ? 4 position tool turret 05.320.040 4.12 Z axis travel provided from double pinion ? spring preload zero backlash rack drive; 4.13 travel of cross slide (X axis) provided by ball screw; 4.14 automatic change of spindle speed ranges; 4.15 central lubrication controlled by CNC; 4.16 chip conveyer; Width mm 3000 Height mm 2200 Net weight of the lathe for 3000 mm turning kg 33000 Additional net weight for each 1m length of the lathe kg 1600 3.6 Control system Sinumerik 840D sl operate

Technical details Swing over bed: 910 mm Swing over carriage: 630 mm Height of centres: 450 mm Max turning length: 6000 mm Turning length in bridge: 400 mm Range of carriage feeds: 42 Longitudinal carriage feed min: 0,049 rpm Longitudinal carriage feed max: 5,6 rpm Transversal carriage feed min: 0,024 rpm Transversal carriage feed max: 2,8 rpm Type of taper: Morse 6 Spindle speeds min: 11 rpm Spindle speeds max: 500 rpm Screw cutting range: - metric: 0,75-64 mm - inch: 64....9/16 m - module: 1...16 m Dimensions (lenght x width): 8725 x 1400 mm Main motor power: 15 kw Weight: ca.11000kg.

SEHO AUTO LOADING CNC LATHE MODEL: A6+ Controller: FANUC 0i TD Bar capacity: φ42mm Swing over bed: φ200mm Max. turning length: 70mm Chuck size: 6" Spindle nose: A2-5 Spindle bore: φ60mm Spindle speed: 5,000rpm Servo turret: 12 station Max. travel X axis: 180mm X axis rapid feed rate: 18m/min Max. travel Z axis: 520mm Z axis rapid feed rate: 24m/min Spindle Motor: 5.5/ 7.5kw *2sets Auto loading rapid feed rate: 24m/min Clamping size: φ50x60L Clamping workpiece weight: 5kg Machine height: 2,200mm Floor space: 4,300x1,800mm Machine weight: 4,100kgs

Turning diameter 630 mm Turning length 2850 mm Control Fanuc 0i-mate MGI Swing over carriage 350 mm Bed width 550 mm Spindle nose D11 / 1: 20 Spindle bore 104 mm Spindle speeds: 17 to 1000 U / min Gear stages automatic. 4-stage Rapid traverse in the X and Z directions 4/8 m / min Tailstock MK 5 Morse Tailstock: Quill 200 mm Quill diameter 100 mm Workpiece accuracy 6-7 ITF x-axis travel 320 mm z-axis travel 3000 mm Feed size 315 mm Dimensions L x W x H 5200 x 1900 x 1900 mm Machine weight 6 t Drive power 11 kW

{{ contactModal.id }}{{ contactModal.companyname }}{{ contactModal.title }}{{ contactModal.stockCode }}{{ contactModal.telephone }}{{ contactModal.inCharge }}

Print Photos See More Details

CNC Lathes Product list for Sale | USED MACHINERY.BZ

USED MACHINERY.BZ

Search Machinery

CNC Lathes