Lathes Product list for Sale | USED MACHINERY.BZ

Search Machinery

1 ～ 50 of 199 POST

Swing Over Bed........................ 12" Max Swing in Gap: .................... 17" Effective Length in Gap: ............. 5" Width of Bed: ........................ 7-1/4" Distance Between Centers.............. 36" Spindle Nose: ........................ D1-4 Spindle Hole.......................... 1-1/2" Spindle Drive......................... 1.5 HP Spindle Speeds........................(9) 70 - 1400 RPM Electrics.............................220v 1ph Control: 2 Axis Newell DP700 Digital Read Out Equipped With: Inch Metric Threading Digital Readout (Option) 5C Collet Closer (Option) 6" 3 Jaw Chuck 8" 4 Jaw Chuck 3-3/4" Steady Rest 10" Face Plate Tailstock Factory Tool Kit 4 Way Tool Post Thread Chasing Dial Center & Sleave Full Length Splash Guard

◆Swing above bed: 630 ◆Center distance: 2000 ◆Swing above cut-off: 900 ◆Swing above carriage: 400 ◆Bed length: 3400 ◆Bed width: 425 ◆Spindle through hole diameter: 54 ◆Spindle taper hole: Metric taper #60 ◆Spindle nose: Short taper ASA A-1-6” ◆Spindle speed: 14 stages 18-1600 rpm (7.5kW or 11kW), 14 stages 125-1120 rpm (7.5kW), 14 stages 9-800/min (5.5kW) ◆Lead screw diameter and pitch: 40mmΦ, 6mm pitch ◆Left/right feed: 64 stages 0.062-14mm/spindle revolution ◆Front/rear feed: 64 stages 0.031-7mm/1 spindle revolution ◆Inch thread cutting: 37 steps, 56-1 teeth/25.4mm ◆Metric thread cutting: 31 steps, 0.5-28mm pitch ◆Modular thread cutting: 21 steps, 0.25-7πmm pitch ◆D.P. thread cutting: 27 steps, 56-4 teeth/25.4π ◆Motor: A.C., 3 phase, 7.5kW ◆Estimated weight: 2800 ✤If there is a difference between the specifications and the actual product, the actual product will take precedence.

FA10 High Speed Precision Automatic Lathe Features The spindle mechanism uses bearings to ensure high speed and stable accuracy. The installation of a threading error detection device ensures safe work management. The automatic material stop device automatically stops the machine at the end of material processing. The automatic material stop device automatically stops the machine at the end of material The machine automatically stops when material is finished, indicated by a red lamp. ● Large work space and easy chip disposal are outstanding. FUJI SEIKI Main Spindle The main bearing is a super-precision angular contact bearing. The spindle bearing is designed to be fixed to the spindle stand after adjusting the preload by using ultra-precision angular contact bearings for back alignment. The bearings are designed to be fixed to the spindle head for easy maintenance and The machine is designed to be fixed to the spindle head, using ultra-precision class angular contact bearings with back alignment and preload adjustment. and precision parts can be machined with high precision and stability. The machine is designed to be fixed to the main spindle for easy maintenance. Tool post The turrets are referred to as No. 1, No. 2, No. 3, and No. 4 tools in the clockwise direction, Each tool is arranged radially around the main spindle. The No. 1 tool moves only in the longitudinal and radial directions, while the No. 2 tool moves only in the radial direction. The No. 1 tool can also perform hole drilling, chamfering, grooving, and other operations simultaneously during the longitudinal feed process, making it very efficient for certain products. Each turret can be fine-tuned with a micro screw, allowing the cutter to be set accurately and quickly. The micro-screws on each turret allow for accurate and quick setting of the cutter. Swivel Arm This device, located on the cam shaft side, performs swivel and longitudinal movements. and performs material receiving, centering, and drilling. Centering table and threading device The drilling spindle is replaced for drilling, and the threading spindle is replaced for tapping and When a tap or die is used, the threading spindle is replaced with a threading spindle. Threading is performed by rotating the threading spindle at high speed in the same direction as the spindle. The threading spindle rotates at high speed in the same direction as the spindle, and the difference in rotation between the spindle and the threading spindle is used for threading. FA10 type is outstanding in terms of ease of use !

Spindle Capacity: Round 5C Collets..................1-1/16" Hexagon 5C Collets................7/8" Square 5C Collets.................3/4" Step Chuck........................6" Jaw Chuck.........................5" Expanding Collets.................3" Swing Over Bed....................11" Swing Over Cross Slide............9" Distance Between Centers..........18" Spindle Bore......................1-1/4" Spindle Speeds....................125 - 3,000 RPM (Variable) Carriage Feed Range...............5/16 - 7 IPM Cross Slide Feed Range............3/16 - 4 IPM Compound Travel...................3" Cross Slide Travel................5-1/2" Inch Threading....................(36) 11 - 108 TPI Metric Threading..................(35) 0.4375 - 2.7 mm Electrics.........................460v 3 Phase Dimensions........................72" x 29" x 66" 2,500 Lbs

next>

last>>

Display All

{{ contactModal.id }}{{ contactModal.companyname }}{{ contactModal.title }}{{ contactModal.stockCode }}{{ contactModal.telephone }}{{ contactModal.inCharge }}

Print Photos See More Details