Shinmeiwa Kiko Co.,Ltd Product Inventory

SELLER PROFILE

Shinmeiwa Kiko Co.,Ltd(Shinmeiwa )Access: 2,241

21 ～ 40 of 976 POST

◆Controller: F31iB5 ◆Maximum workpiece swing: 370 mm (14.57 in) ◆Swing on cross slide: 370 mm (Turret 2: 300 in) ◆Maximum distance between tailstock and spindle head: 888 mm (35.0 in) ◆Maximum turning diameter of BW axis: 890 mm (35.04 in) ◆Maximum machining diameter: 370 mm (Tool spindle, Turret 2) 270 in) ◆Maximum machining length: 424 mm (16.69 in) ◆Bar work capacity: 52 mm (2.05 in) ◆X1 axis (tool spindle): 380 mm (14.96 in) ◆Y axis (tool spindle): ±105 mm (±4.13 in) ◆Z1 axis (tool spindle): 460 + 155 mm (ATC travel) ◆B axis (tool spindle): ±120° ◆X2 axis (turret 2): 155 mm (6.10 in) ◆Z2 axis (turret 2): 610 mm (24.01 in) ◆BW axis: 4-position indexing ◆Spindle 1: Kitagawa BB206 6-inch ◆Spindle 1 speed: 6000 min-1 ◆Spindle 1 tip: JIS A2-5 ◆Spindle Through-hole Diameter: 61 mm (2.40 in) ◆Minimum Spindle Index Angle: 0.0001° ◆Spindle Bearing Inner Diameter: 100 mm (3.94 in) ◆Spindle Torque (40% ED/30 min/continuous): 223 N·m ◆Spindle Chuck: BB206A521 (Kitagawa Iron Works 206A 6-inch Hollow Chuck) ◆Spindle Cylinder: SS1453K21 (Kitagawa Iron Works Hollow Rotary Cylinder) ◆Spindle 2: Riken Seiki Collet Chuck ◆Spindle Speed: 6000 min-1 ◆Spindle Through-Hole Diameter: 38 mm (1.50 in) ◆Minimum Spindle Index Angle: 0.0001° ◆Spindle Bearing Inner Diameter: 70 mm (2.76 in) ◆Spindle Torque (25% ED/Continuous): 37/22 N·m ◆Spindle Chuck: SAD40MSP (Riken Seiki Collet Chuck) ◆Spindle Cylinder: SS1453K21 (Kitagawa Iron Works) Water-Injected Rotating Cylinder) ◆ Number of Tools Mounted: 1 ◆ Minimum B-Axis Index Angle: 0.0001° ◆ Tool Spindle Speed: 12,000 min-1 ◆ Tool Spindle Taper Bore: C5 [HSK-A50 (T50)] ◆ Tool Spindle Bearing Inner Diameter: 65 mm (2.56 in) ◆ Tool Magazine Capacity: 38 ◆ Maximum Tool Diameter (with adjacent tools): 70 mm (2.76 in) ◆ Maximum Tool Diameter (without adjacent tools): 130 mm (5.12 in) ◆ Maximum Tool Length: 250 mm (Tool Diameter Less than 70 mm) 210 mm (Tool Diameter 70 mm or More) ◆ Number of Tools Mounted on Turret 2: 10 ◆ Coolant Tank Capacity: 300 L (79.2 gal) ✤ In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

◆Control device: MAZATROL SmoothX ◆Maximum swing: Φ530mm ◆Maximum machining length: 519mm ◆Maximum machining diameter: Φ500mm ◆Spindle speed: 6000rpm ◆Tool shank type: HSK ATC36 ◆Rotary tool: 12000rpm ◆Spindle 0.0001° indexing, C-axis control ◆B-axis 0.0001°/contouring cutting possible (EIA required) ◆Thread cutting function ◆USB I/F (1 port) ◆LAN port ◆SD I/F (1 port), USB I/F (1 port) ◆Relocation detection device [Special accessories] ◆Tool eye (automatic) ◆Automatic front door opening/closing ◆Chip conveyor (side discharge, CONSEP) [Special Edition] ◆ System 3R Micro Chuck Installation Ready ✤If there are any discrepancies between the specifications and the actual product, the actual product will take precedence.

◆Control device: MX-NEXUS 12.1”LCD ◆Maximum swing: Φ680mm ◆Swing on the carriage: Φ680mm ◆Maximum processing diameter: Φ500mm (tool protrusion 65mm/V posture) ◆Rotation speed 35-3300min-1 ◆Spindle through hole diameter: Φ113 ◆Spindle motor: Built-in type variable speed AC inverter motor ◆C-axis minimum command unit: 0.0001°/pulse ◆C-axis rapid traverse rotation speed: 555min-1 ◆90° indexing time: 0.5sec ◆Rotary tool rotation speed: 35 to 12000min-1 ◆Tapered hole type of tailstock: MT No.5 ◆Tailstock travel amount: 1026mm ◆Thrust: 1.0-10.0kN ◆Number of tools stored: 72 (optional) ◆Maximum diameter for tool storage: Φ90 (No adjacent tools): Φ125 ◆Turret type: 1 spindle turret with ATC ◆Tool shank model: CAPTO C6 ◆Maximum tool length: 400mm ◆Maximum tool mass: 10kg ◆Fast forwarding speed: X50＊Y40＊Z50＊W8＊C555 ◆Travel amount: X615＊Y250＊Z695＊W1026＊B-30~190 ◆Height at center: 1235mm ◆Machine dimensions: W4240＊D2705＊H2720 ◆Machine mass: 12000kg [Special accessories] ◆Front door automatic opening/closing [Custom accessories/special specifications] ◆Compatible with coolant capacity of 400L or more ◆Made by Kitagawa Iron Works, hollow 12 inches (compatible with Φ102mm) ◆3-tier signal tower raised (300mm) ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

◆Control device: OKK FANUC Ai ◆Travel distance XYZ: 720*510*460 ◆Distance from table top to spindle end: 100-560 ◆Distance from column front to spindle center: 532 ◆Size of work surface (X-axis direction * Y-axis direction): 850*510 ◆Workpiece allowable mass: 800kg ◆Work surface shape (T-slot nominal dimension * spacing * number): T18*110*5 ◆Height from floor to table work surface: 850 ◆Rotation speed: 100-12000min-1 ◆Spindle end: No.40 ◆Bearing inner diameter: Φ65 ◆Pull stud (nominal number): MAS P40T-1 (45°) ◆Number of tools that can be stored: 20 ◆Maximum tool diameter (with adjacent tools): Φ78 ◆Maximum tool diameter (without adjacent tools): Φ110 ◆Maximum tool length (from gauge line): 300 ◆Maximum tool weight: Maximum 8/Average 5/Total 100 ◆Coolant for cutting oil: 240L [Special accessories] ◆Signal light: 3-light type Alarm: Red light with buzzer ◆Coil conveyor: 2 coil conveyors on the left ◆Air blow device ◆Each axis has a lubrication grease terminal ✤If there is a difference between the specifications and the actual product, the actual product will take precedence.

◆Control device: FANUC Oi-MF ◆Control panel: General-purpose guidance function NC program ◆Number of control axes: 3 axes ◆Number of ATC tool storage: 24 ◆Travel: XYZ: 1050＊550＊550 mm ◆Table work area: 1600＊500 mm ◆Distance from spindle end to table top: min 150 mm / max 700 mm ◆Distance from spindle center to column guide surface: 510 mm ◆Distance from floor to table top: 820 mm ◆Maximum spindle speed: 8500 min-1 ◆Spindle speed change: Automatic (Manual dial setting 20 steps Override 50-120%) ◆ Spindle bearing diameter: 70mm ◆ Spindle taper hole: No.40 ◆Two-sided constraint spindle ◆ Tool mounting bolt shape: MAS-I　 ◆ Rapid forward speed (XYZ): 10000mm/min ◆ Cutting speed (automatic): 0-6000mm/min＊10-200% (MAX6000) ◆ Cutting speed (manual): 4-4000mm/min＊10-200% (MAX6000) ◆Cutting fluid device (tank capacity 100L) with chip bucket ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

◆Professional5 ◆Travel：X1200*Y700*Z650 ◆Spindle：HSK-A63 ◆Spindle speed：200-20000min-1 ◆Bull stud：MAS403 P40T1 type ◆Number of tools stored：30 ◆Tool selection method：Address fixed indexing method ◆Maximum tool dimensions (diameter x length)：Φ120*300mm ◆Maximum tool weight：8kg ◆Table：1400*700mm ◆Maximum load weight on table (evenly distributed)：2500kg ◆Table top height：850mm ◆Minimum setting unit：0.0001mm ◆Jog feed speed：0-4000mm/min ◆Cutting feed speed：1-20000mm/ min ◆Fast forward speed：20000mm/min ◆Cutting fluid supply device ◆Total tank capacity (lift-up conveyor)：345L ◆Spindle drive：15kw (spindle taper No. 40 specification) ◆Spindle temperature controller：1100*820mm ◆Positioning accuracy (total length)：±0.002mm, ±0.0015 (with scale) ◆Spindle front bearing inner diameter： Φ80mm ✤If there is a difference between the specifications and the actual product, the actual product will take precedence.

Travel amount (XYZ): 762*460*460 Table top surface to spindle end surface: 150 to 610 Table dimensions: 1,000*460 Maximum loading capacity: 700 Cutting fluid device: Tank 170L (effective 100L) OSP: P200M Spindle rotation speed (#40): 50 to 20,000min-1 Tool shank shape: HSK-A63 Table size E: 460*1,000 ATC tool storage number: 48 Status indicator light: 3-stage C type (standard) lift up chip conveyor Through spindle coolant: medium pressure 1.5MPa Cutting fluid heating and cooling device Spindle thermal displacement control: TAS-S Environmental thermal displacement control: TAS-C Absolute scale detection: X, Y, Z axis OSP-P200M 3D-D DNC-DT Super-NURBS function: Yes ◆Special specification contents Lighting device: spotlight Cutting fluid noise special lock night method Mist collector model With Showa Denki CRD-750R filter ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

◆Controller: OSP-P200M ◆Power Supply: 200V ◆Frequency: 60Hz ◆Travel Range (XYZ): 1050＊560＊460 ◆Table Top to Spindle Nose: 150 - 610 ◆Column Front to Spindle Center: 720 ◆Working Surface Size: 560＊1300 ◆Table Size: 560＊1300 ◆Table Top Shape: 18T Slots＊4 ◆Maximum Load Capacity: 900 ◆Rapid Traverse Rate (XYZ): 40, 40, 320 ◆Cutting Feed Rate (XYZ): 32 ◆Spindle Speed: 50 - 15,000 min-1 ◆ATC Tool Storage Capacity: 20 (Standard) ◆Tool Shank Shape: BT40 ◆Pull Stud Bolt: MAS 2 ◆Tool Storage Capacity: 20 ◆Maximum Tool Diameter: Φ90/Φ125 ◆Maximum Tool Length/Weight: 300/8 ◆Tool Selection Method: Random Memory ◆Chip Washing Device ◆Chip Tray ◆Mist Collector: Akamatsu HVS-100 ◆Required Floor Space: 2470＊3000 ◆Machine Height: 2750 ◆Machine Weight: 7500 ※Chip Conveyor Not Included ✤If there are any discrepancies between the specifications and the actual product, the actual product will take precedence.

{{ contactModal.id }}{{ contactModal.companyname }}{{ contactModal.title }}{{ contactModal.stockCode }}{{ contactModal.telephone }}{{ contactModal.inCharge }}

Print Photos See More Details

Shinmeiwa Kiko Co.,Ltd Product Inventory | USED MACHINERY.BZ

USED MACHINERY.BZ

SELLER PROFILE

Shinmeiwa Kiko Co.,Ltd(Shinmeiwa )Access: 2,241