Mg:600*300 S680*330

Full auto

Chuck: 600*300 (special) Grindstone: 305*19-32*76.2 Stroke: X680Y330 Z-axis digital Magnet separator Mist collector

Horizontal type

For dresser

Diameter of magnetic table 600φ、 Max Swing 700φ、 thickness of workpiece 300、 grinding wheel dia 355、 grinding wheel speed 970/1170rpm、 table speed 12-30/14-36 rpm、 spindle motor 11 KW、 table motor 1.5kw、 machine weight 3200kg

Table:φ600 open centerφ110 pitch 6*2

Origin: USA Admit Between Centre: 600mm Centre Height: 135mm Swing: 260mm Universal Machine with ID / OD

Grinding Capacity：φ1-φ40 Wheel Size：Φ455*205 1500rpm　 11kw

Turning speed:3000rpm Grindstone diameter:φ180*32*φ31.75 chuck:380*110*80(H) SONY counter (2-axis)

T:600*140 MG:380*110*130 Wheel:φ180*6-32*φ31.75 Wheel motor:1.5kw YZ axis digital scale(Forward and backward・up and down） Coolant tank

Permanent magnetic chuck:175*100

MG chuck 2000*800 Wheel φ510*50*φ127　 980rpm 7.5Kw Left right 2150*Front back 830mm　 Table-under wheel 695mm Overhead wheel dresser MG separator＋Coolant tank

Tilting chuck:400*125 Up and down digital

Okamoto (5 units)

◆Cutting hole diameter: 6-100mm ◆Grinding stroke: 5-200mm ◆Workhead rotation angle: 30° ◆Water discharge swing (standard): 270mm ◆Height from frame surface to chuck: 1020mm ◆Table speed (variable): 0.5-10m/min ◆Grinding wheel rotation speed: 10000-60000rpm ◆Infeed knob (1 scale): 0.01mm ◆Infeed knob (1 rotation): 3mm ◆Fine infeed knob (1 scale): 0.002mm ◆Fine infeed knob (1 rotation): 0.6mm ◆Workpiece rotation speed (variable): 60-800rpm ◆Required floor space (including water injection system): 3050＊1500mm ◆Electric motor Workpiece headstock: 0.75kW 4-pin ◆Hydraulic electric motor: 0.75kW 4-pin ◆Grinding wheel spindle: 2.2kW 3-pin ◆Weight: Approx. 2000kg ✤If there are any discrepancies between the specifications and the actual product, the actual product will take precedence.

◆Table work surface size: W140＊D600 ◆Table movement amount: 520＊180 ◆Distance from the top of the table to the bottom of the whetstone: 320 ◆Dimensions of standard chuck (tilting type): 380＊110 ◆Workpiece allowable mass (including chuck): 80 ◆T groove width: 12mm ◆Left and right feed speed (hydraulic): 0.1 to 18m/min ◆Left and right handle feed amount per revolution: 100 ◆Saddle Front and rear manual feed Handle 1 rotation: 5mm, Dial 1 scale: 0.02mm, Fine movement 1 scale: 0.005mm ◆ Grinding wheel head Manual depth of cut One rotation of the handle: 1mm, One scale of the dial: 0.002mm, Vertical rapid feed speed (50/60Hz): 300/360 ◆Whetstone (outer diameter x width x inner diameter): Φ180＊6 ~ 32＊Φ31.75, rotation speed (50/60Hz): 3000/3600 ◆Motor For grinding wheel shaft: 1.5/2kW/p, For hydraulic pump: 0.75/4kW/p, For vertical rapid traverse 0.1/4kW/p ◆Power Required power (including standard chuck, dust suction and water injection device with separator) 2.5kVA ◆Occupied volume Width＊depth＊height: 2200＊1351＊1720 ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

MG chuck 2000*800　 Wheelφ510*50*φ127　 980rpm　 7.5Kw Left right 2150*Front back 830 Table-under wheel 695 Overhead wheel dresser Paper filter+MG separator＋Coolant tank Dust Collector Oil Con

◆Table work surface size (length＊width): 605＊300 ◆Table travel (manual: left/right＊front/back): 750＊340 ◆Distance from table top to bottom of grinding wheel (50Hz, Φ355mm grinding wheel): 22.5 - 322.5 ◆Distance from table top to bottom of grinding wheel (60Hz, Φ305mm grinding wheel): 47.5 - 347.5 ◆Dimensions of mountable standard chuck (length＊width＊height): 600＊300＊80 ◆Maximum workpiece weight (including chuck weight of 100kg): 420kg ◆T-slot width＊number: 17＊3 ◆Left/right feed rate (average): 0.3 - 25 ◆Feed amount per left/right handle rotation: 47 ◆Manual front/back feed (feed amount per handle rotation): 5.0 ◆Manual front/back feed (feed amount per dial increment): 0.02 ◆Automatic front/back feed Intermittent Feed: 0.5-20 ◆Automatic Front/Back Feed Continuous Feed Speed: 0.1-1.0 ◆Automatic Infeed Rate (Traverse & Plunge Cut): 0.001-0.03 (12 levels) ◆Manual Infeed Rate (Manual Infeed Rate per Rotation of the Handle): 0.01/0.1/1.0 ◆Manual Infeed Rate (Manual Infeed Rate per Dial Mark): 0.0001/0.001/0.01 ◆Sparkout Rate: 0-5 ◆Up/Down Speed: 600mm/min ◆Grinding Wheel Outer Diameter (50/60Hz)＊Width＊Inner Diameter: Φ355/Φ305＊38＊Φ127 ◆Grinding Wheel Rotation speed (50/60Hz): 1500/1800 min-1 ◆Power supply requirements: 3-phase 200V, 50/60Hz, 3-phase 220V, 60Hz ◆Power capacity (including optional chuck and water injection device): 10kVA ◆Occupied volume (W＊D＊H): 2737＊1929＊1808 ◆Machine weight: 2800 kg ✤If there are any discrepancies between the specifications and the actual product, the actual product will take precedence.

INR 875000

Travel : X-850mm Y-430mm Z-450mm Table Size : 1000x 400mm Magnet 800x 400mm X,Y,Z Fully Automatic

chuck: 800*400 ST:X950Y440 Dust Collector Magnet Separator Grindstone balancer

If you have any questions about specifications, feel free to contact me. I will share a PDF file with you. Thank you .

3-jaw chuck size:φ230 Grindable hole diameter:φ10-200 Grindable hole length:200 Max workpiece length:400 Swing over table:φ540 Swing in the cover:300 Spindle turning speed:50-660(50Hz)60-800(60Hz)rpm Spindle hole through diameter:φ3 Table movement amount:480 CS specification

φ330*500 Work weight:150kg Wheel:φ405*75*φ127 1570/ 2235rpm 3.7kw Work spindle:25-300rpm MT-4 MG separator & coolant tank Wheel balancing stand Wheel frange Wheel