125T*3000, AMNCPC, OH:420

45T, Sizing device 5.5m type, NC:AMADAN-01FA, Dies: 8 pieces (flat bar cut 90° corner notch / 45° corner notch / angle cut / APE-45 / channel flange punch / AP-345 / mold type unknown)

50T*2000, Auto BG, OH:370

Control: CNC-C00 (WA) ST: X650Y400Z305 Table: 800 x 400 (single-sided) ATC-22 10000rpm BT30 NC Circular table (TSUDAKOMA: RWA-160L) with coolant-through spindle

Mitsubishi 3 Axis, Diametral pitch 12.7MOD Cone distance (30° spiral angle and 12" cutter) 230mm Work head angle 12°~90° Maximum gear pitch diameter 10:1 (460mm)、2:1(406mm)、1:1(324mm)、Face width (maximum)70mmNmber of teeth 5~150mm、Diameter of taper hole at large end 100mm Taper per foot 15mm、Depth of taper 150mm、Diaameter of hole through spindle 78mm Cutter speeds 17~115rpm、Feed 9~80 seconds Net weight 10750kg

S:150mm DH:285mm SL:100*160 B:400*340 モーター：1.5kw

Swing: 330 Drilling:φ13

Max module M2.5、(10DP)、Max dia 7~100mm Number of teeth Z5~100 Helix angle up to 45 deg, left or right Axial travel of hob head 180 Max size of hob φ65×65l、Hob shift travel 30 Hob spindle speeds 200~1500rpm Main motor 5HP×4P Nt weight 2100KG

YASNUCi80MB T:305×460 ST:X305Y254Z305 8000rpm BT30 ATC-16 2APC

Control: Arumatic-Mi(Mitsubishi) Table: 400×2APC, B-Axis: 0.001°Indexing Laoding capacity: 350kg Travel:XYZ: 610×610×610 Spindle: 15,000rpm、BT40、 ATC50 Distance from table top to spindle end:40-650 ・Through-spindle coolant ・Linear scale feedback(XYZ) ・Chip-conveyor&Bucket

INR 1200000

Cap : 80Tons Stroke : 130mm Die Height : 320mm Adjustment : 60mm SPM : 37~75 Slide : 550 x 450mm Bolster : 1000 x 600mm

150TON/st250/27～55spm/DH475/ADJ100/B1250×800×165/S700×550/SE

chuck:550×200

・192-130 ✤If there are any discrepancies between the specifications and the actual product, the actual product will take precedence.

・20-25 ・30-40 ・40-50 ※25-30 out of stock ✤If there are any discrepancies between the specifications and the actual product, the actual product will take priority.

・339-301 ✤If there is a discrepancy between the specifications and the actual product, the actual product will take precedence.

The hook on the lid is broken. ✤If there are any discrepancies between the specifications and the actual product, the actual product will take priority.

・103-145 ✤If there is a discrepancy between the specifications and the actual product, the actual product will take precedence.

◆Table work surface size (length＊width): 605＊300 ◆Table travel (manual: left/right＊front/back): 750＊340 ◆Distance from table top to bottom of grinding wheel (50Hz, Φ355mm grinding wheel): 22.5 - 322.5 ◆Distance from table top to bottom of grinding wheel (60Hz, Φ305mm grinding wheel): 47.5 - 347.5 ◆Dimensions of mountable standard chuck (length＊width＊height): 600＊300＊80 ◆Maximum workpiece weight (including chuck weight of 100kg): 420kg ◆T-slot width＊number: 17＊3 ◆Left/right feed rate (average): 0.3 - 25 ◆Feed amount per left/right handle rotation: 47 ◆Manual front/back feed (feed amount per handle rotation): 5.0 ◆Manual front/back feed (feed amount per dial increment): 0.02 ◆Automatic front/back feed Intermittent Feed: 0.5-20 ◆Automatic Front/Back Feed Continuous Feed Speed: 0.1-1.0 ◆Automatic Infeed Rate (Traverse & Plunge Cut): 0.001-0.03 (12 levels) ◆Manual Infeed Rate (Manual Infeed Rate per Rotation of the Handle): 0.01/0.1/1.0 ◆Manual Infeed Rate (Manual Infeed Rate per Dial Mark): 0.0001/0.001/0.01 ◆Sparkout Rate: 0-5 ◆Up/Down Speed: 600mm/min ◆Grinding Wheel Outer Diameter (50/60Hz)＊Width＊Inner Diameter: Φ355/Φ305＊38＊Φ127 ◆Grinding Wheel Rotation speed (50/60Hz): 1500/1800 min-1 ◆Power supply requirements: 3-phase 200V, 50/60Hz, 3-phase 220V, 60Hz ◆Power capacity (including optional chuck and water injection device): 10kVA ◆Occupied volume (W＊D＊H): 2737＊1929＊1808 ◆Machine weight: 2800 kg ✤If there are any discrepancies between the specifications and the actual product, the actual product will take precedence.

Pallet Truck 700kg

Control: OSP-P300L(Advanced One-touch IGF) Chuck: 8”Hollow(Kitagawa BB-208A)、NC Turret: V12 Swing over bed: φ580、  Distance between center: 470 Max.Turning Dia.×length: φ340×450 Spindle speed: 4500min、　Spindle through hole: φ80 Milling spindle: 6000min Travel:XYZC: 260x120x510x360° ・NC Tailstock ・Tool pre-setter(Manual) ・Mist collector ・Door interlock(Type Ⅱ) ・Chip-conveyor * Gear Hobbing Unit( SUHNER (SU-matic)

Control: OSP-P300M Table: 400×2APC, B-Axis: 0.001°Indexing Loading capacity: 400kg Travel:XYZ: 560×560×625 Spindle: 15,000rpm、BT40、 ATC64 ・Auto tool length offset/breakage detection ・Auto Workpiece Gauging/Auto zero offset ・Through-spindle coolant ・Oil-mist collector ・Chip-conveyor&bucket

Cooling capacity: 3.6/4.1kw Voltage: 100V Frequency: 50Hz/60Hz Power consumption: 180/230W

・116±0.003 ✤If there is a discrepancy between the specifications and the actual product, the actual product will take precedence.

・124±0.004 ✤If there is a discrepancy between the specifications and the actual product, the actual product will take precedence.

・80±0.002 ✤If there is a discrepancy between the specifications and the actual product, the actual product will take precedence.

*Only 100 is out of stock. ✤If there are any discrepancies between the specifications and the actual product, the actual product will take priority.

45TON/st70/100spm/DH270/手動AJ60/S400×350/B800×450/SE

MAZATROL MATRIX NEXUS 10"chuck tailstock 12stations