Spindle NT50 1500rpm Table:1500*350 XY:850*350 ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

T:1500×350 S:X850×Y350×Z540 Spindle:NT50, 45～1500rpm 3-axis digital

FANUC 32i-MODEL B NT50 2000rpm T:1400×400 S:850×400×520

◆Control device: FANUC Oi-MF ◆Control panel: General purpose/Guidance/NC ◆Number of control axes: 3 axes ◆Travel XYZ: 750＊350＊500mm ◆Distance from spindle end to table top (travel): min 115mm / max 615mm ◆Distance from spindle center to column guide surface (travel): 360mm ◆Table work area: 1400＊350mm ◆Table load capacity: Approx. 500kg ◆Distance from floor to table top: 820mm ◆Maximum spindle speed: 6000min-1 ◆Spindle speed change: Automatic (Manual dial setting 21 steps Override 50-120%) ◆Spindle: 70mm ◆Spindle taper hole: 7/24 taper No.40 ◆Tool mounting bolt shape: MAS-I ◆Tool shank shape: BT40 ◆Cutting speed (automatic): 0-6000mm/min＊10-200 % ◆Cutting speed (manual): 0-4000mm/min＊10-200 % ◆Cutting fluid device (tank capacity 60L) ◆Fast forward speed: 6000mm/min ✤If there is a difference between the specifications and the actual product, the actual product will take precedence.

Controller : FANUC 32i-MODEL B Table size: 1,600×500 mm Max. work weight: Approximately 600 kg Travel　X : 1,250　Y : 550　Z : 520 mm Distance from spindle to table top : 140～660 mm Spindle speed ： 2,000 rpm Spindle taper : BT50 Required area: 3,350×2,070 mm 　　 Height : 2,475 mm Machine weight ： Approximately 4,700 kg 　　　 Control device operation panel : General-purpose/ Guidance 　　　　　 Number of controlled axes: 2 axes (X, Y) X-axis stroke extension (stroke 1250 mm) Chip coil conveyor (inside the machine) Table splash guard Partition type Pull stud type tool attachment/detachment device (BT50) High-speed spindle specification 3000 rpm Inverter control Override 　　　　　 No cutting fluid device

Control unit: FANUC 32i-MODELB Table size: 1400 x 400 mm Max. work weight: 600 kg Table T-slot width and pitch: 18 (h7) P = 80 mm 　　　　　 Number of table T-slots: 5 Travel　X: 850　 Y: 400　 Z: 520 mm Spindle end to table top: 140 to 660 mm Spindle speed: 55～2,000 rpm Spindle taper: BT50 Machine required area: 2,954 x 1,870 mm Height: 2,499 mm 　　　　　 Machine weight: Approximately 3,700 kg 　　　 NC 2 axis (X, Y axis), Z axis manual Bullstat type tool attachment/detachment device (BT50) Chip coil conveyor Air blower for cutting chips (manual) Cutting tank (60ℓ) 　　　　　 Processing guidance function

If you have any questions about specifications, feel free to contact me. I will share a PDF file with folks. Thank you .