Search Machinery

Hydraulic Presses

SEARCH FILTER

1 ~ 44 of 44 POST

[MFR]FEINTOOL

[Model]GKP-F 25/40

[Year]1969

Shearing force: 25 tons Total force: 40 tons Slide stroke: 36...90 or 45...110/min Feeding. Band thickness/width of band: 1-4mm/100mm Max. feeding length: 60 mm Max. distance of clamp feeding: 4 mm Max. clamping power: 1324 N Pump motor power: 0,75 kW Electricity: 380V / 50Hz Main motor: 3 kW Machine overall dimensions: -Length: 1260 mm -Width: 1260 mm -Height: 1300 mm Machine weight: 2500 kg

[MFR]FEINTOOL

[Model]GKP-F 125/200

[Year]1974

Total force: 200 tons Shearing force: 125 tons Upper table force: 2-60 tons Lower table force: 2-60 tons Ejector force: 18 tons Drive motor power: 20 hp Pump motor power: 15 hp Number of slide strokes per minute: 15-60 Max. material thickness: 10 mm Frontal passage between columns: 560 mm Side passage between columns: 270 mm Tool height: 160-305 mm 175-320 mm Vertical travel of upper bolster plate: 145 mm Upper bolster plate dimensions: 540 x 540 mm Lower bolster plate dimensions: 540 x 540 mm Max. hydraulic stroke of ejector: 14 mm Max. strip thickness: 10 mm Max. strip width: 250 mm Max. moving-out length per every slide stroke: 250 mm Power supply connection: 360 V 50 Hz Electric control: 24 V 100 W Lighting: 220 V 24 W Drive motor: 360 V 50 Hz Pump motor: 360 V 50 Hz Machine dimensions: -Height: 3120 mm -Depth: 1900 mm Machine weight: 14,5 tons

[MFR]DNEPROPETROVSK

[Model]DA2238A

[Year]

Nominal force: 630 tons Slide stroke: 800 mm Max. distance between table and slide: 1600 mm Table dimensions: -Length: 1400 mm -Width: 1250 mm Nominal force of ejector: at least 100 tons Stroke of ejector: 450 mm Slide speed at: -Idle stroke down: at least 100 mm/s -Working stroke: at least 2,5 mm/s -Returning stroke: 45 mm/s Speed of ejector up: 16-50 mm/s Nominal force of returning cylinders: 80 tons Number of preforms: 3 Press dimensions: -Left-to-right: 4180 mm -Front-to-back: 2330 mm -Height above floor level: 5570 mm Press weight: 33000 kg

[MFR]LITOSTROJ

[Model]HKO-1-1000

[Year]1979

Capacity: 1000 tons

[MFR]

[Model]PHK3S

[Year]

Stroke: 200mm

[MFR]LAPPLE

[Model]750 T

[Year]

Laepple Hydraulic Press 750 T single action ? table 3000 x 1900mm

[MFR]SCHULER

[Model]SCHULER HYDRAP 315

[Year]2001

Model: HPDZb 3150-3000/1300 YOM: 2001 Condition: Very good Technical details: Capacity: 315 ton Bed size dimensions: 3000 x 1300 mm Min. die stamping dimensions: 2000 x 866 mm Stroke: 800 mm Machine weight: 85T

[MFR]SCHULER

[Model]

[Year]2001

EUR 240000

New in: 2001 Condition: Very good 2 pieces Technical details Press capacity: 315 T Table dimensions: 3 000 x 1 300 mm Min. die stamping dimensions: 2 000 x 866 mm Slide stroke: 800 mm Max. shut height: 1 300 mm Number of strokes per min (regulated): 13-46 Cusion capacity: 160 T Cusion stroke: 200 mm The price quoted for the 2 presses!!!

[MFR]SCHULER

[Model]HYDRAP 500

[Year]2010

Condition: Very good dismantled Technical details: Capacity:500 T Bed size dimension: 1500 x1400mm Cutting shock damping: 5000kN Function spring tool: 200kN Quills bore in table: 49 pcs Distance quills bores in X and Y:x 150mm Y 150mm

[MFR]VORONEZH

[Model]K7538

[Year]

Nominal Force 630/400 ton Slider stroke ? Internal slider 1000 mm ? External slider 630 mm Number of strokes per minute ? Continuous 8-14 ? Single 6-10 Shut height 1700 mm Adjustment 400 mm Table size 3150�~2500 mm Slider sizes ? Internal 2650�~1900 mm ? External 3140�~2500 mm Dimensions (WxLxH) 5260x4830x12700 Weight 269 ton

[MFR]

[Model]P3239

[Year]

Force 800 ton Stroke 1200 mm Shut height 2200 mm Table size (width length) 2600 x 3600 mm Dimension (width length height) 6390 x 11015 x 6605 Weight 157 ton

[MFR]TYAZHPRESSMASH

[Model]P272A

[Year]

-Force 3150 ton -Stroke 1000 mm -Shut height 2200 mm -Speed of slide 200 mm/sec -Table 1600 x 2000 mm -Dimensions 14800x10000x7100 mm -Weight 330 tons

[MFR]TYAZHPRESSMASH

[Model]P273A

[Year]

? Force 5000 ton ? Stroke 1250 mm ? Shut height 2500 mm ? Speed of slide 200 mm/sec ? Table 2000 x 2500 mm ? Dimensions 11440 x 17460 x 8230 ? Weight 510 ton

[MFR]INOUE YUATSU

[Model]AC-100

[Year]1981

【❖Take a look at our video!❖】 Table length:1000*800*150mm Maximum working pressure:250kg / cm2 Inertia drop value:20.5mm Pressure capacity:100t Stroke:500 OH:750 Motor:3.7kw ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

[MFR]LIEN CHEN

[Model]LDO-150-20-1200*1000[NEW]

[Year]

Ability:25-150t Pull up ability:11t T:1200*1000 Stroke:800 DL:1000 Maximum mold weight:2t Die cushion ability:8-20t Cushion pin diameter:φ 34.5mm Cushion pin:4 Table he ight (from FL):1100mm Voltage:200V Tank capacity:800L ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

[MFR]UMEBAYASHI

[Model]UME-150

[Year]1985

Capacity:150t

[MFR]UMEBAYASHI

[Model]UME-150

[Year]1985

Capacity:150t

[MFR]OSAKA JACK

[Model]1000T

[Year]1986

S:600 DL:1000 SL:1500*1100 BL:1500*1200

[MFR]YOSHITSUKA

[Model]PCMH-40SU

[Year]2005

8 ̄32spm

[MFR]KANTO YUATSU

[Model]PH-150

[Year]

T:1500x2000mm ST:550mm 37kw

[MFR]OSAKA JACK

[Model]HPE

[Year]1997

Capacity:200t S:500 DL:1000 T:2000*1100 SL:1900*900 DC:100t

[MFR]OSAKA JACK

[Model]HPE

[Year]1997

Capacity:200t S:500 DL:1000 T:2000*1100 SL:1900*900 DC:100t

[MFR]AIDA

[Model]PD-200

[Year]1985

B:2000x1330mm ST:300mm 10~25spm DH:520mm

[MFR]NEAGARI

[Model]

[Year]1995

B:1800x1150mm ST:600mm cusion tempture controller

[MFR]SUZUKI TEKKOSHO

[Model]BDT-200M-2015

[Year]1979

SUZUKI ( KONGO ) B:2000x1500mm

[MFR]JAM

[Model]HYP-505S

[Year]1999

ST:150mm BL:400x340mm

[MFR]JAM

[Model]HYP1000

[Year]2008

B:440×430mm ST:200mm SN:80012

[MFR]JAM

[Model]HYP1000

[Year]2008

B:440×430mm ST:200mm

[MFR]OSAKA JACK

[Model]HPC-H100

[Year]1986

Pressure capacity:100t Stroke length:350mm Gap:350mm DL:600 Electric motor:5.5kw*2 units Sudden stop time:85msec ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

[MFR]KAWASAKI

[Model]TMP2-1000

[Year]1991

--- ASK

Maker: Kawasaki Model: TMP2-1000 Year: 1991 Capacity: 1000 tons Pressure adjustment range: 42-245kg/cm2 Lifting power: 50.9tf Maximum stroke: 1000mm Daylight: 1800mm Table size: 2000 x 1500 mm Slide dimensions: 2000 x 1500 mm No-load descending speed: 300mm/s Release output: 75tf Release speed: 50-5mm/s Lower KO Output: 16.5tf Lower KO Pressure: 210kgf/cm2 Lower KO Stroke (mm): 250mm Lower KO rising speed: 110mm/s Lower KO pad dimensions: 1400 x 600 mm

SELLER :W & N

ID:#10937

[MFR]SHINOHARA KIKAI

[Model]

[Year]

Model:AG-100 Capacity:100TON Stroke:150TON S.P.M:35 Shut height:280mm Ram adjustment:80mm Ram dimension:428x460mm Bolster dimension:740x740mm Bolster thickness:75mm Main motor:5.5kWx4P

SELLER :W & N

ID:#11724

[MFR]FEINTOOL

[Model]HFA 14000

[Year]2000

TECHNICAL PART Press Design drive system: hydraulic frame design: H-frame, monoblock quick die change system: yes feedstock transport direction: left to right Slide total force (nominal): 1400to stroke: 340mm slide (hydr. Press) approximation velocity max.: 100mm/s working velocity min.: 5mm/s working velocity max.: 40mm/s return velocity max.: 120mm/s Counter Ram nominal force: 350to stroke: 50mm V-Ring nominal force: 700to stroke: 50mm Tool Dimensions lower table (left-right): 1270mm lower table (front-back): 1800mm upper table (left-right): 1200mm upper table (front-back): 1200mm tool width max.: 1150mm tool depth max.: 1150mm shut height max.: 940mm tool weight max.: 6000kg Overall Specifications (coil lines) sheet width max: 650mm sheet thickness max: 18mm max. weight of coil: 7.5to feed velocity max.: 10m/min feedstock transport direction: left to right Coil Chair max. weight of coil: 7.5to Decoiler design: single reel sheet width max: 100mm sheet width (min): 650mm max. weight of coil: 7.5to max. diameter of coil: 2000mm mandrel expansion range from: 470mm mandrel expansion range up to: 530mm Leveller Unit sheet width max: 650mm sheet width (min): 100mm sheet thickness max: 16mm sheet thickness (min): 2mm number of leveller rolls: 8 diameter of leveller rolls: 127mm distance between leveller rolls: 134mm diameter of feed rolls: 160mm feed velocity min.: 1m/min feed velocity max.: 10m/min loop controls: yes Leveller Unit sheet width max: 500mm sheet width (min): 50mm number of leveller rolls: 21 diameter of leveller rolls: 56mm diameter of feed rolls: 150mm feed velocity max.: 15m/min Strip-Feeder feeder type: roll feeder sheet width max: 630mm sheet thickness max: 20mm feeding step max.: 999.9mm Electrical specifications mains voltage: 400V mains frequency: 50Hz Technical Description Coil line SCHULER, consisting of: - coil chair - coil reel SCHULER HES 12-850 - straightener SCHULER RM 8-125/160-0650 (650x16 mm) - additional leveller ARKU 21 rolls (500x 6 mm)

[MFR]OSAKA JACK

[Model]HPC-H150

[Year]1982

150t ST:350 B:1100*700 DL:600

[MFR]PROSPEROUS

[Model]SLS-600D

[Year]

Capacity:600T, S:1200, Bolster:3000*1800, Slider:3000*1800, Lifting Capacity:35T, DH:1600, Cushion:180T

[MFR]PROSPEROUS

[Model]SLS-800D

[Year]

Capacity:800T, Bolster:3000*1800, Slider:3000*1800,S:1200, Lifting Capacity:40T, DH:1600, Cushion Capacity:240T

[MFR]INOUE YUATSU

[Model]MS-200

[Year]1972

T:2,000x990mm

[MFR]SONODA

[Model]

[Year]

ST:550 DL:590 B:700×600 Light Guard attached, but malfunction.(No mounting holes)

[MFR]JAM

[Model]HYP505HP

[Year]2018

49kN S:150 OH285 B:400*340

[MFR]AIDA ENGINEERING

[Model]TCS-60-45/90

[Year]2003

NS2-3000(2NL) type Stroke 300mm Stroke number 15~30spm Die height 650mm Slide adjustment amount 130mm Slide dimensions 2400x900 Bolster dimensions 2600x1200 Transfer device Feed stroke 0~600mm Clamp stroke 0~225mm Lift stroke 0~60mm Minimum internal width when clamping 450mm Maximum internal width when unclamped 900mm ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

[MFR]JAM

[Model]HYP305H

[Year]2007

[High speed type] Pressure capacity:1~3T S:30-150 Ram descending speed:318mm/sec Ram rising speed:274.0mm/sec Working pressure range:35.4 to 106 OH:280 Bolster:350*240 Shank hole:φ20*40 Motor output:0.75kw ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

[MFR]JAM

[Model]HYP1000

[Year]2006

[High speed type] Pressure capacity:4~10T S:200 Ram descending speed:260mm/sec Ram rising speed:219.0mm/sec Working pressure range:42.4 to 106 OH:359 Bolster:440*430 Shank hole:φ32*60ℓmm Motor output:1.5kw ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

[MFR]

[Model]

[Year]

40t

[MFR]SANKI SEIKO

[Model]SHM-2515-300

[Year]1998

300ton  Table: 2500*1500  Day light-1200  Stroke-850  Main RAMφ375  Mold weight:3Ton Upper Mold: 2Ton Press speed: 46/SEC(30ー130t) 17/SEC(130ー300t) Elevation speed: 357/SEC  Inertial descent value-59.2 Die cushion: 14ー80Ton  φ160*2unit Uplift:7Ton  Stroke-300 55Kw/ 4P Mold positionning pin: φ30*4points Photoelectric sensing safaty

{{ contactModal.id }}{{ contactModal.companyname }}{{ contactModal.title }}{{ contactModal.stockCode }}{{ contactModal.telephone }}{{ contactModal.inCharge }}
prevNext