Inventory List for Sale
All Categories：2025/05/05～2025/05/11：16
[MFR]AIDA ENGINEERING
[Model]K-250
[Year]1989
S：160 50spm DH：400 Adj：15 SL：500*400 B：600*500
[MFR]AIDA ENGINEERING
[Model]K-250
[Year]1985
S：160 50spm DH：400 Adj：15 SL：500*400 S：600*500
[MFR]AIDA ENGINEERING
[Model]K-250
[Year]1985
S：140 50spm DH：350 Adj：15 SL：500*400 B：600*500 K.O
[MFR]AIDA ENGINEERING
[Model]K1-400
[Year]1993
S：180 30-50spm DH：500 Adj：50 SL：700*600 B：700*600 V.S
[MFR]AIDA ENGINEERING
[Model]NC1-60(2)
[Year]1988
S：140 70spm DH：300 Adj：70 SL：480*400 B：870*520 K.O
[MFR]AIDA ENGINEERING
[Model]NC1-80(2)
[Year]1987
S：120 60spm DH：340 Adj：80 SL：540*460 B：950*600 K.O
[MFR]AIDA ENGINEERING
[Model]NS2-3000(INL)
[Year]2007
S：200 20-45spm DH：600 Adj：130 SL：2400*900 B：2600*1200 D.C
[MFR]KARATS
[Model]GS-101A type
[Year]
GS-101A type Max dia-evtermal spur gearφ180、 Internal spur gear φ152、 Max width 51、 Max module4、 Taper of cutter arbor MT5、 cutter sprindle dia 85、 Max cutter dia 100 Type、 Distance between under surface of cutter、 spindle nose and top surface of work table 95~155、 work spindle bore 55、 cutter strokes 225/300、 340/450、500/600、 weight 2500kg
[MFR]MATSUURA MACHINERY
[Model]VC-1800
[Year]1976
◆Size of table work surface: 280＊1250mm ◆Table movement XYZ: 600＊300＊400mm ◆Number of left and right feed speed changes: 18 steps (dial change) ◆Left and right feed speed: 18-985mm/min ◆Spindle end: #40 ◆Spindle speed change: stepless ◆Spindle rotation speed: 85-3600rpm ◆Quill vertical movement amount: 1225mm ◆Quill automatic feed speed: 0.04, 0.08, 0.16 (3 steps) ◆Spindle head rotation speed: 55° left and right each ◆Spindle motor: 3.3㏋ ◆Feeding motor: 400W 4/8P ◆Cutting oil electric motor: 80W ◆Ram travel amount: 400mm ◆Weight: 2000kg ◆Vertical fast forward motor: 400W 4P ◆Lubricating oil device: automatic lubrication ・Vise mouth width: 150mm ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.
[MFR]MORI SEIKI
[Model]CL-15
[Year]1996
MSC-521 Spindle: 6 inch 4500rpm 12-station turret Center: 330 Stroke: X190Z370 Chip conveyor
[MFR]NACHI-FUJIKOSHI
[Model]NUV-10SA
[Year]1993
pulling force:10t Max Storoke:1400mm cutting speed:1-5.0m/min Return speed:12.5m/min Bolster hole dia:135mm Max. workpiece dia:380mm
[MFR]O-M
[Model]OMEGA 50M
[Year]2002
Controller : FANUC-18iT Table diameter : φ915 mm Max. turning dia./turning height.: φ1,000 mm/535mm Max. swing : φ1,250 mm Max. work weight : 1,500 kg Distance from rotating holder surface to table nose : 667 mm Distance from turning holder surface to table nose : 665 mm Max. drill dia. (tool carbide, work material S45C) : 75 mm Cross rail (fixed) * Low position Travel From center of table to right : 1,015mm From center of table to left (X axis) : 50 mm Turret Up and down (Z axis) : 800 mm Milling spindle end taper : BBT50 (BIG (Plus compatible) Table rotation speed (Low speed range) : 4.0～200 min-1 Spindle speed Low : 4.0～200 min-1 High : 16.0～550 min-1 Inching : 4 min-1 Milling spindle rotation speed : 15～1,500 min-1 ATC : 15 stations (Factory setting: 6 # for turning, 8 # for rotation, 1 dummy plate) Max. tool storage length (from mounting surface) : 450 mm Max. tool storage weight : 50 kg (turning) /25 kg (rotating tools) Required floor space : 3,300×3,275 mm Machine height : 4,285 mm Machine weight : 12,000 kg Chip conveyor (rear discharge) φ915mm hydraulic 3-jaw table Tape memory length 160m Interactive automatic programming function for lathes (CAPII) Polar coordinate interpolation Cylindrical interpolation Helical interpolation
[MFR]SEIWA CORPORATION
[Model]MS-30
[Year]
MS-30 Max workpice diaφ300、 Max workpiece module 6、 Max axial travel 350、 Distance between the centers of hob arbor and work arbor 20~250、 table dia φ350、 table boreφ82、 hob shift 130、 spindle rpm 100~400、 Main motor 10HP、 1 axis NC (radial)， machine weight 8000kg
[MFR]SHIGIYA MACHINERY WORKS
[Model]GAS-82
[Year]2004
Fanuc-21iTB Swing over table:dia820mm Distance between centers:750mm Automatic sizing device Separator
[MFR]SUN FIRM MACHINERY
[Model]CET-36120
[Year]
SUN FIRM(SFM)(MADE IN TAIWAN) CET-36120 Swing over badφ920、 Swing over cross slide φ650、 distance between center 3000、 spindle bore 105、 spindle speed 3~1560、 X-axis 400、Z-3000、 tool station：turret V8、 hydraulic tailstock 、 FANUC 0ITD
