- HOME
- Select Manufacturer
- OKAMOTO
OKAMOTO Product List
1 ～ 29 of 29 POST
[MFR]OKAMOTO
[Model]PFG 450
[Year]
Brand: Okamoto Model: PFG 450 Type: Manual Motor: 415v
[MFR]OKAMOTO
[Model]OMA-350DX
[Year]1990
Electromagnetic signbar Potable type(Upper Body is separatable) Dust Collector 125*250
[MFR]OKAMOTO
[Model]PSG-52DXNC
[Year]1991
Fanuc-0M Tuning speed:3000rpm Grindstone diameter:φ205*19*φ50.8(inner diameter) T:500*200*80(H)
[MFR]OKAMOTO
[Model]PSG-20B
[Year]1974
1000rpm Grindstone diameter:φ510*50*127(inner diameter) T:2000*500*105(H) forward & back / left & right movement Auto cuts
[MFR]OKAMOTO
[Model]PFG-500
[Year]1994
Turning speed:3000rpm Grindstone diameter:φ180*32*φ31.75 chuck:380*110*80(H) SONY counter (2-axis)
[MFR]OKAMOTO
[Model]ASM-160A
[Year]1985
ASM-160A(Reform) Spindle motor:5.5kw 2P Blade:φ670(outer diameter)*φ240(inner diameter) Cutting feed stroke:Max 230 Cutting feed speed:1~200mm/min Cutting workpiece size:φ125*L500
[MFR]OKAMOTO
[Model]ASM-1G
[Year]1980
Auto cycle Coolant tank. This is already overhold (1997)
[MFR]OKAMOTO
[Model]PFG-500Ⅱ
[Year]2006
T:600*140 MG:380*110*130 Wheel:φ180*6-32*φ31.75 Wheel motor:1.5kw YZ axis digital scale(Forward and backward・up and down） Coolant tank
[MFR]OKAMOTO
[Model]GTR-350F; GTR-F
[Year]
GTR-350F Max. dia chamfered external gear 400、internal gear 100 Min. dia chamfered 40 Max. module M6 (4DP) Teeth number chamfered each number of 10~60, 61~100, except prime no. Net weight 1,350kgs ---------------------------------------------------------------------------------- GTR-F Max dia chamfered External gear 200φ Internal gear 100φ Mix dia chamfered 40φ Max module M6 (DP4) Teeth number chamfered each number of 10~60、61~100except prime no Net weight 1000 kg
[MFR]OKAMOTO
[Model]IGM-15NCⅢ
[Year]2016
Fanuc Grinding Internal dia :150 Stroke:125 swing over Table:dia600mm X170 Z500 Spindle bore 50mm speed:850rpm less hours
[MFR]OKAMOTO
[Model]PSG-125
[Year]1980
left and right movement of the table:1300 Column fore and aft movement:530 Table size:1200*500 Grindstone size:510*50*127 Standard chuck size:600*500*110(2 stations) Grindstone rotational speed:980rpm(50Hz)/1100rpm(60Hz)
[MFR]OKAMOTO
[Model]PSG-208B
[Year]1985
MG chuck 2000*800 Wheel φ510*50*φ127 980rpm 7.5Kw Left right 2150*Front back 830mm Table-under wheel 695mm Overhead wheel dresser MG separator＋Coolant tank
[MFR]OKAMOTO
[Model]PFG-500DX
[Year]1996
Tilting chuck: 315*110 Grindstone: outer diameterφ180 * width 6～32 * inner diameterφ31.75
[MFR]OKAMOTO
[Model]OKAMOTO NO.2型 (2 sets in stock)
[Year]
MAX TEST WORK 3 Center distance -35~750 Angle of both axes 90°
[MFR]OKAMOTO
[Model]PSG-63DX
[Year]1992
FX controller MG chuck:600*300 Wheel:φ355/305*38*φ127 1500/1800rpm 3.7Kw
[MFR]OKAMOTO
[Model]PSG-158DXNC
[Year]2009
F-32i MG chuck:1500*800 S:1750*860*720 Wheel:φ510*50*φ127 700-1500rpm 15Kw Wheel continuously variable transmission Oil cooler
[MFR]OKAMOTO
[Model]PSG-158DXNC
[Year]2009
F-32i MG chuck:1500*800 S:1750*860*720 Wheel:φ510*50*φ127 700-1500rpm 15Kw Wheel continuously variable transmission Oil cooler
[MFR]OKAMOTO
[Model]PSG-84DX
[Year]1999
Table work surface:850*400 Chuck size:800*400 Workpiece allowable mass:700kg T-slot width x number:17mm*3 Whetstone (outer diameter 50/60Hz) width * inner diameter:φ355/305*38*φ127mm Rotation speed (50/60Hz):1500/1800min-1 Required power:11kVA ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.
