Travel X axis (Longitudinal) 1200 (48") Y axis (Cross) 680 (26.3") Z axis (Vertical) 610 (24") Spindle nose to table surface 125-725 (5" - 28.5") Spindle center to column surface 720 (28.3") Table Table dimension 600 �~ 1500 (23.6"�~ 59") T-slots (wide �~ no. �~pitch) 18 (0.70") �~ 5 �~ 100 (3.94") Table height from the floor 860 (33.8") Table load capacity 1200kgs (2640lbs) Headstock Spindle nose (BT/CAT/ISO) #40 taper / #50 taper Spindle RPM (#40 taper) 6,000 / 8,000 (opt.) Spindle RPM (#50 taper) 4,500 / 6,000 (opt.) Feedrate Rapid traverse for X Y Z axis 15000 mm./.min (600 ipm) Cutting feed for X Y Z axis 1-10000 mm./.min (0.04-400 ipm) Motors Main motor #40 (cont./30min) 7.5Kw / 11K Main motor #50 (cont./30min) 11Kw / 15Kw AC servo motor for each axis 2Kw-14NW / 3.5Kw-22NM (opt.) Coolant system 580W Lubrication system 25W Chiller system 850W for spindle over 8,000RPM Automatic tool changer Magazine for armless type 16 / 20 tools Magazine for arm type 24 / 32 /40 tools Max. tool diameter #40: 70 / 127 (3"/5") #50:125 / 180 (5"/7") Max. tool length #40:300 (11.8") #50:350 (13.8") Max. tool weight #40 : 7 kgs (15lbs) #50 : 15kgs (33lbs) Accuracy Positioning �}0.005 mm / �}0.0002" Repeatability �}0.005 mm / �}0.0002" General information Air pressure 5Kg / cm? over Machine weight 6500 (14300 lbs) Floor space (L �~ W �~ H) 3200 �~ 3300 �~ 2800 (126" �~ 130" �~ 110")

32 PAGE -4 COLOR -2 SET

Mitsubishi 450t used plastic injection molding machine Youtube Video: https://youtu.be/RYuTeMD8Qas Model: 450MSG Tie bar distance: 820x820mm. Screw diameter: 50mm. Shot weight: 700g. Year: 2005. Opening stroke: 1050mm. Daylight Opening(max): 1400mm Machines are in good running condition. Interested buyers are welcome to inspect machines anytime in our warehouse. Daxin Machinery -Over 200 units of used injection molding machines in stock -All can be inspected in the same warehouse under one roof -All can be powered on for test-run in working condition sales@daxin88.com Skype: daxin-machinery Mobile: +8613509620296 (whatsapp) / +6596479097 (WeChat) www.daxin88.com / www.daxin-machinery.com Follow Daxin Machinery: Facebook Twitter Google+ LinkedIn Youtube.

Mitsubishi Used Plastic Injection Molding Machine Youtube Video: https://youtu.be/hrDKARJ6-Pk Model: 650MM? Tie bar spacing: 1080x1080mm Screw diameter: 90mm Injection Volume: 3140cm^3. Year: 1999. Opening Stroke: 1350mm Daylight Opening: 1800mm. Machine is in good working condition. Interested buyers are welcome to inspect and test run machine in our warehouse. Daxin Machinery -Over 200 units of used injection molding machines in stock -All can be inspected in the same warehouse under one roof -All can be powered on for test-run in working condition sales@daxin88.com Skype: daxin-machinery Mobile: +8613509620296 (whatsapp) / +6596479097 (WeChat) www.daxin88.com / www.daxin-machinery.com Follow Daxin Machinery: Facebook Twitter Google+ LinkedIn Youtube.

Mitsubishi 1300t used injection molding machine. Tie bar spacing: 1320x1280mm. Screw diameter: 100mm. Injection volume: 4540cm^3. Mould thickness: 700~1200mm. Clamp stroke: 1800mm. Machine is in very good running condition. Interested customer is welcome to inspect and test run machine.

Running hour: 11693 hour Screw diameter: 135mm Shot weight: 9500g Tie bar spacing: 1600x1800mm Maximum mould thickness: 1500mm Minimum mould thickness: 800mm Clamping Stroke: 2400mm Daylight Opening (Max): 3200mm

Code: 525 Power: 470 KW/ 630 HP 605 KW / 811HP RPM: 1600 /1800 Ref.no: Model: S6R-T2MPTK Power: 470 kw/ 600 hp/ 1600 rpm Power: 605 kw/ 811 hp/ 1800 rpm New 100%

Model: S6R2-T2MPTK3 Power: 691kW/1406RPM Condition: New Code: 453 Power: 691kW/927HP RPM: 1406RPM Ref.no: Views: 891 l??t 6-cylinder 4-cycle Water cooled Diesel Engine Direct-injection Turbocharged with Air-cooler Built-up Heat Exchanger & Sea water pump. Bore*Stroke (mm): 170*220 Displacement (L): 29.96

Mitsubishi Marine Engine Model: S6U-C2MPTK Power: 680kW/1100RPM Condition: New Code: 458 Power: 680kW/912HP RPM: 1100RPM Ref.no: 6-cylinder 4-cycle Water cooled Diesel Engine Direct-injection Turbocharged with Air-cooler Bore*Stroke (mm): 240*260 Displacement (L): 70.57

Code: 278 Power: 1036 kW RPM: 1800RPM Ref.no:

Code: 552 Power: 585 kW RPM: 1800 Ref.no: Views: 10 l??t Mitsubishi generator set Model: DCA-610SPM Engine Model: S6R-PTA Power: 585kW/ 1800 RPM Quantity: 4

6776hrs SN:11437

MELDAS 520AM T:1100*500 T load capacity:800kg Main axis NT No.50 Tool shank:MAS BT50 ATC24 Power capacity:28kVA ※With helical cutting ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

Inner dimensions of processing tank :W1100*D750*H400 Maximum dimensions of workpiece :W1050*D700*H300 Workpiece allowable mass:1000kg Table :W850*D600 S:500*400*350 Allowable electrode mass:100kg ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.