◆FANUC Series 180iMB ◆Table working surface: L600＊W300mm ◆Table movement: 750＊340mm ◆Table top to grinding wheel axis: 520mm ◆Chuck dimensions: 400＊300mm ◆Maximum load weight (including chuck and grinding wheel forming device): 450kg ◆Front-rear feed speed: 1000mm/min ◆Minimum front-rear setting unit: 0.0001mm ◆Up-down feed speed: 1000mm/min n ◆Minimum setting unit up and down: 0.0001mm ◆Whetstone dimensions: (outer diameter＊width＊inner diameter) (inverter specification, MAX): 305＊38＊127 ◆Whetstone rotation speed (inverter specification): 1800min-1 ◆Power capacity: 24KVA ✤If there is a difference between the specifications and the actual product, the actual product will take priority.

chuck:500*200*100(H)

F-32i MG chuck:1500*800 S:1750*860*720 Wheel:φ510*50*φ127 700-1500rpm 15Kw Wheel continuously variable transmission Oil cooler

Fanuc-0M Tuning speed:3000rpm Grindstone diameter:φ205*19*φ50.8(inner diameter) T:500*200*80(H)

FANUC－20iFA chuck:500*200 ST:X600Y250Z410 Stainless steel bar

Horizontal type S/NO.981315

Horizontal type S/NO.981274

Horizontal type S/NO.981227

Horizontal type S/NO.981033

Fanuc-20F T:580*200mm Chuck:500*200*70mm X:600 Y:225mm 3600rpm