x-travel 600 mm y-travel 400 mm z-path 600 (900) mm Total power requirement 13 kW Machine weight about 3.5 t Space needs about 1730x3100x2800 m

Brand : Feeler Model: FV - 600 SE Year: 2006 Mitsubishi Control

50" x 20" x 25" 7500 RPM 20 ATC 20 HP GEAR BOX HAAS CNC CONTROL w/12" MONITOR, RS-232C PORT INTERFACE FOR DNC OPERATION, RIGID TAPPING (SYNCHRONOUS TAPPING), GEARBOX SPINDLE (20 HP) CHIP AUGER, QUIKCODE PROGRAMMING FLOPPY DISK DRIVE, PROGRAMMABLE COOLANT NOZZLE WIRED FOR 4TH AXIS, STANDARD COOLANT SYSTEM WITH TANK & PUMP, FULLY ENCLOSED GUARDING ALL AVAILABLE MANUALS,

TABLE SIZE 64" x 28" MAXIMUM TABLE LOAD 4,000 LBS SPINDLE NOSE TO TABLE TOP 4" - 29" X AXIS TRAVEL 64" Y AXIS TRAVEL 32" Z AXIS TRAVEL 30" SPINDLE TAPER CAT 40 SPINDLE SPEEDS (2 SPEED GEARBOX) 0 - 7,500 RPM SPINDLE MOTOR 15 HP TOOL CHANGER CAPACITY 20 STATION ATC MAXIMUM TOOL WEIGHT 12 LBS RAPID TRAVERSE RATE X Y & Z AXES 500 IPM WEIGHT APPROX. 21,500 LBS DIMENSIONS APPROX. 150"L x 108"W x 119"H HAAS CNC CONTROL RS-232C PORT INTERFACE, GEARBOX SPINDLE HEAD, RIGID TAPPING (SYNCHRONOUS / SOLID TAPPING), HAAS CHIP AUGER QUICKCODE PROGRAMMING, PRE-WIRED FOR 4TH AXIS ROTARY (NO ROTARY INCLUDED), COOLANT SYSTEM WITH TANK & PUMP, FULLY ENCLOSED GUARDING ALL AVAILABLE MANUALS,

Travels X: 40" Travels Y: 20" Travels Z: 25" Spindle RPM: 10,000 RPM Spindle HP: 20 HP Vector Dual Drive Tool Changer: (24) ATC Side Mount Taper: #40 Table Size: 48" x 18" Equipped With: Wired for 4th Axis Chip Auger Coolant Cart 1MB Program Memory Remote Jog 208/230 Volt 50/60 Hz 3 Ph Dimensions: 123"L x 92"W x 125"H Weight Approximate: 14,000 Lbs.

TABLE SIZE 29.5" x 20" MAXIMUM TABLE LOAD 1540 LBS SPINDLE NOSE TO TABLE TOP 4.1" - 26.1" X AXIS TRAVEL 23.6" Y AXIS TRAVEL 20.1" Z AXIS TRAVEL 20.1" SPINDLE SPEED RANGE 0 - 8000 RPM RAPID TRAVERSE RATE X Y & Z AXES 1181 IPM CUTTING FEED RATE 0.1 - 590 IPM SPINDLE TAPER CAT 40 SPINDLE MOTOR 17.3 HP TOOL CHANGER CAPACITY SIDE-MOUNT 24 STATIONS TOOL-CHANGE TIME 2.5 SECONDS MAXIMUM TOOL WEIGHT 13.2 LBS WEIGHT APPROX. 10,000 LBS DIMENSIONS APPROX. 86"L x 93"W x 101"H FANUC Oi-M CNC CONTROL w/COLOR LCD DISPLAY, RS-232C PORT INTERFACE FOR DNC OPERATION, RIGID TAPPING (SYNCHRONOUS / SOLID TAPPING), w/LOOKAHEAD FOR HIGH SPEED MACHINING, REMOTE JOG HANDLE PRE-WIRED FOR 4TH AXIS, w/SIDE-MOUNT SWING ARM TOOL CHANGER OPTION, SURROUND TOOL COOLANT w/5 ADJ. SPINDLE PORTS, COOLANT SYSTEM WITH TANK & PUMP, FULLY ENCLOSED GUARDING ALL AVAILABLE MANUALS,

TABLE SIZE 55" X 19" MAXIMUM TABLE LOAD 1322 LBS TABLE TOP TO SPINDLE NOSE 5.5" - 27.6" X AXIS TRAVEL 51.2" Y AXIS TRAVEL 20" Z AXIS TRAVEL 22" RAPID TRAVERSE RATE X Y AXES 630 IPM RAPID TRAVERSE Z AXIS 510 IPM SPINDLE TAPER CAT 40 SPINDLE SPEEDS 0 - 6,000 RPM SPINDLE MOTOR 15 HP TOOL CHANGER CAPACITY 24 TOOL ATC (SIDE MOUNT) MAXIMUM TOOL WEIGHT 13 LBS DIMENSIONS APPROX. 134"L x 105"W x 109"H WEIGHT APPROX. 15,000 LBS Equipped With: FANUC O-M CNC CONTROL WITH RS-232C PORT INTERFACE, DRILLED & TAPPED SUB-PLATE MOUNTED ON TABLE (53"x 19") RIGID BOX WAY DESIGN, COOLANT SYSTEM WITH TANKS & PUMP, CHIP-REMOVAL SCRAPERS w/TABLE MOVEMENT, FULLY ENCLOSED GUARDING, ALL AVAILABLE MANUALS

TABLE SIZE 45" x 16" MAXIMUM TABLE LOAD 1500 LBS X AXIS TRAVEL 30" Y AXIS TRAVEL 16" Z AXIS TRAVEL (w/EXTENDED TRAVEL) 26" RAPID TRAVERSE RATE X & Y AXES 1000 IPM CUTTING FEED RATE 0.1 - 500 IPM SPINDLE TAPER CAT 40 SPINDLE SPEEDS 50 - 8000 RPM SPINDLE MOTOR 24 HP TOOL CHANGER CAPACITY 24 STATION SIDE-MOUNT WEIGHT APPROX. 10,000 LBS DIMENSIONS APPROX. 93"L x 93"W x 110"H HIGH SPEED 8200 CNC PC BASED LCD COLOR CONTROL, USB & RS-232C PORTS INTERFACE NETWORKING, FULL CONVERSATIONAL PROGRAMMING 3-D GRAPHICS, COOLANT THROUGH SPINDLE (HIGH PRESSURE UNIT), WITH OPTIONAL HIGH-TORQUE 24 HP SPINDLE, CHIP CONVEYOR (SIDE-MOUNT), EXTENDED Z-AXIS TRAVEL COLUMN, PROGRAMMABLE AIR-BLAST, CHIP WASH-DOWN FEATURE FOR WAY COVERS, MIST BUSTER AIR CLEANER/FILTER, SD MEMORY CARD & USB SLOT FLOPPY DISK DRIVE, FastCam 2 CU-33 FANUC G-CODE COMPATIBLE, SIDE-MOUNT SWING-ARM AUTO TOOL CHANGER (24 TOOL), COOLANT SYSTEM w/MOBILE TANK & (2) PUMPS, FULLY ENCLOSED GUARDING,

TABLE SIZE 56" x 24" MAXIMUM TABLE LOAD 3500 LBS X AXIS TRAVEL 50" Y AXIS TRAVEL 25" Z AXIS TRAVEL 24" RAPID TRAVERSE RATE X & Y AXES 1000 IPM CUTTING FEED RATE 0.1 - 500 IPM SPINDLE TAPER CAT 40 SPINDLE SPEEDS 50 - 8000 RPM SPINDLE MOTOR 35 HP TOOL CHANGER CAPACITY 24 STATION WEIGHT APPROX. 19,700 LBS DIMENSIONS APPROX. 144" x 102" x 116" H HIGH SPEED 8200 CNC PC BASED LCD COLOR CONTROL, USB & RS-232C PORTS INTERFACE NETWORKING DNC, FULL CONVERSATIONAL PROGRAMMING 3-D GRAPHICS, COOLANT THROUGH SPINDLE (PARKER COOLANT-THRU) WITH OPTIONAL HIGH-TORQUE 35 HP SPINDLE, REMOVABLE CHIP DRAWERS WITHIN PAN, FANUC G-CODE COMPATIBLE FLOPPY DRIVE, REMOTE JOG HANDLE/WHEEL, FANUC G-CODE COMPATIBLE, SIDE-MOUNT SWING-ARM AUTO TOOL CHANGER (24 TOOL), COOLANT SYSTEM w/MOBILE TANK w/PUMP, FULLY ENCLOSED GUARDING,

Travel X axis (Longitudinal) 1200 (48") Y axis (Cross) 680 (26.3") Z axis (Vertical) 610 (24") Spindle nose to table surface 125-725 (5" - 28.5") Spindle center to column surface 720 (28.3") Table Table dimension 600 �~ 1500 (23.6"�~ 59") T-slots (wide �~ no. �~pitch) 18 (0.70") �~ 5 �~ 100 (3.94") Table height from the floor 860 (33.8") Table load capacity 1200kgs (2640lbs) Headstock Spindle nose (BT/CAT/ISO) #40 taper / #50 taper Spindle RPM (#40 taper) 6,000 / 8,000 (opt.) Spindle RPM (#50 taper) 4,500 / 6,000 (opt.) Feedrate Rapid traverse for X Y Z axis 15000 mm./.min (600 ipm) Cutting feed for X Y Z axis 1-10000 mm./.min (0.04-400 ipm) Motors Main motor #40 (cont./30min) 7.5Kw / 11K Main motor #50 (cont./30min) 11Kw / 15Kw AC servo motor for each axis 2Kw-14NW / 3.5Kw-22NM (opt.) Coolant system 580W Lubrication system 25W Chiller system 850W for spindle over 8,000RPM Automatic tool changer Magazine for armless type 16 / 20 tools Magazine for arm type 24 / 32 /40 tools Max. tool diameter #40: 70 / 127 (3"/5") #50:125 / 180 (5"/7") Max. tool length #40:300 (11.8") #50:350 (13.8") Max. tool weight #40 : 7 kgs (15lbs) #50 : 15kgs (33lbs) Accuracy Positioning �}0.005 mm / �}0.0002" Repeatability �}0.005 mm / �}0.0002" General information Air pressure 5Kg / cm? over Machine weight 6500 (14300 lbs) Floor space (L �~ W �~ H) 3200 �~ 3300 �~ 2800 (126" �~ 130" �~ 110")

MSC504 S:600*530*510 #40 ATC30 Max spindle speed:10,000min-1 Tool maximum diameter:125mm Maximum mass of tool:8kg Program storage capacity:640m ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

TABLE SIZE 67" x 26" MAXIMUM TABLE LOAD 4,400 LBS SPINDLE NOSE TO TABLE TOP 7.9" - 33.5" X AXIS TRAVEL 60.0" Y AXIS TRAVEL 25.6" Z AXIS TRAVEL 25.6" RAPID TRAVERSE RATE X & Y & Z AXES 590 IPM SPINDLE TAPER CAT 50 SPINDLE SPEEDS (2 SPEED GEAR BOX) 4,000 RPM TOOL CHANGER CAPACITY 30 STATION ATC SPINDLE MOTOR 25 HP TOOL CHANGE TIME (TOOL TO TOOL) 2/3 SECONDS MAXIMUM TOOL WEIGHT 44 LBS WEIGHT APPROX. 34,200 LBS DIMENSIONS APPROX. 172"L x 128"W x 125"H FANUC MF-M6 (16M) CNC CONTROL, RS-232C PORT INTERFACE FOR DNC OPERATION, CIRCULAR/HELICAL INTERPOLATION CW & CCW, RIGID TAPPING (SYNCHRONOUS / SOLID TAPPING), REMOTE PULSE GENERATOR SPINDLE CHILLER, SPINDLE AIR-BLAST SYSTEM, SIDE MOUNT 30 STATION SWING ARM ATC, CHIP WASH DOWN w/TABLE CHIP SWEEPERS, COOLANT SYSTEM WITH TANK & PUMP, FULLY ENCLOSED SPLASH GUARDING, ALL AVAILABLE MANUALS

TABLE SIZE 39.37" x 20.08" MAXIMUM TABLE LOAD 1,100 LBS SPINDLE NOSE TO TABLE TOP 7.87" - 25.59" X AXIS TRAVEL 30" Y AXIS TRAVEL 16.14" Z AXIS TRAVEL 17.72" RAPID TRAVERSE RATE X & Y AXES 590 IPM RAPID TRAVERSE RATE Z AXIS 511 IPM CUTTING FEED RATE 0 - 160 IPM SPINDLE TAPER CAT 40 SPINDLE SPEEDS 60 - 12,000 RPM SPINDLE MOTOR 10 HP TOOL CHANGER CAPACITY 20 STATION ATC TOOL CHANGE TIME (TOOL TO TOOL) 4.5 SECONDS MACHINE DIMENSIONS (APPROXIMATE) 114" x 119" x 107" MACHINE WEIGHT (APPROXIMATE) 13,500 LBS OKUMA OSP-5020M CNC CONTROL WITH 9" COLOR CRT RS-232C PORT INTERFACE FOR DNC USER TASK II, 12,000 RPM HIGH-SPEED SPINDLE, RIGID TAPPING (SYNCHRONOUS/SOLID TAPPING) 80M MEMORY, GRAPHIC DISPLAY FLOPPY DRIVE HELICAL CUTTING, REMOTE JOG HANDLE EXACT STOP CHECK ANIMATION, DAIKIN SPINDLE CHILLER (SPINDLE OIL COOLING SYSTEM), FULLY ENCLOSED SPLASH GUARDING WORK LIGHT, 4 ADDITIONAL M FUNCTIONS ALL AVAILABLE MANUALS

◆OSP-200M ◆X.Y.Z:1050.560.460 ◆T:560*1300 ◆MBT40 ◆ATC32 ◆50～15000min-1 ・Through spindle coolant (medium pressure type 1.5MPa) ・Touch sensor ・Automatic measurement ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

Country of Origin: Germany Working travel X: 1 300 mm Y: 610 mm Z: 610 mm Table surface: 1 500 x 610 mm Range of spindle speeds: 8 000 rpm Tool magazine: pcs Tool holder: ISO 40 Control: CNC SIEMENS

Fanuc-0iMC 2000rpm X200 Y200 Z250mm BT15 ATC20 T:400x200mm

FANUC16-M AMANO Dust Collector PiA-45M