◆Table work surface size: W140＊D600 ◆Table movement amount: 520＊180 ◆Distance from the top of the table to the bottom of the whetstone: 320 ◆Dimensions of standard chuck (tilting type): 380＊110 ◆Workpiece allowable mass (including chuck): 80 ◆T groove width: 12mm ◆Left and right feed speed (hydraulic): 0.1 to 18m/min ◆Left and right handle feed amount per revolution: 100 ◆Saddle Front and rear manual feed Handle 1 rotation: 5mm, Dial 1 scale: 0.02mm, Fine movement 1 scale: 0.005mm ◆ Grinding wheel head Manual depth of cut One rotation of the handle: 1mm, One scale of the dial: 0.002mm, Vertical rapid feed speed (50/60Hz): 300/360 ◆Whetstone (outer diameter x width x inner diameter): Φ180＊6 ~ 32＊Φ31.75, rotation speed (50/60Hz): 3000/3600 ◆Motor For grinding wheel shaft: 1.5/2kW/p, For hydraulic pump: 0.75/4kW/p, For vertical rapid traverse 0.1/4kW/p ◆Power Required power (including standard chuck, dust suction and water injection device with separator) 2.5kVA ◆Occupied volume Width＊depth＊height: 2200＊1351＊1720 ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

MG chuck 2000*800　 Wheelφ510*50*φ127　 980rpm　 7.5Kw Left right 2150*Front back 830 Table-under wheel 695 Overhead wheel dresser Paper filter+MG separator＋Coolant tank Dust Collector Oil Con

◆Table work surface size (length＊width): 605＊300 ◆Table travel (manual: left/right＊front/back): 750＊340 ◆Distance from table top to bottom of grinding wheel (50Hz, Φ355mm grinding wheel): 22.5 - 322.5 ◆Distance from table top to bottom of grinding wheel (60Hz, Φ305mm grinding wheel): 47.5 - 347.5 ◆Dimensions of mountable standard chuck (length＊width＊height): 600＊300＊80 ◆Maximum workpiece weight (including chuck weight of 100kg): 420kg ◆T-slot width＊number: 17＊3 ◆Left/right feed rate (average): 0.3 - 25 ◆Feed amount per left/right handle rotation: 47 ◆Manual front/back feed (feed amount per handle rotation): 5.0 ◆Manual front/back feed (feed amount per dial increment): 0.02 ◆Automatic front/back feed Intermittent Feed: 0.5-20 ◆Automatic Front/Back Feed Continuous Feed Speed: 0.1-1.0 ◆Automatic Infeed Rate (Traverse & Plunge Cut): 0.001-0.03 (12 levels) ◆Manual Infeed Rate (Manual Infeed Rate per Rotation of the Handle): 0.01/0.1/1.0 ◆Manual Infeed Rate (Manual Infeed Rate per Dial Mark): 0.0001/0.001/0.01 ◆Sparkout Rate: 0-5 ◆Up/Down Speed: 600mm/min ◆Grinding Wheel Outer Diameter (50/60Hz)＊Width＊Inner Diameter: Φ355/Φ305＊38＊Φ127 ◆Grinding Wheel Rotation speed (50/60Hz): 1500/1800 min-1 ◆Power supply requirements: 3-phase 200V, 50/60Hz, 3-phase 220V, 60Hz ◆Power capacity (including optional chuck and water injection device): 10kVA ◆Occupied volume (W＊D＊H): 2737＊1929＊1808 ◆Machine weight: 2800 kg ✤If there are any discrepancies between the specifications and the actual product, the actual product will take precedence.

INR 875000

Travel : X-850mm Y-430mm Z-450mm Table Size : 1000x 400mm Magnet 800x 400mm X,Y,Z Fully Automatic

chuck: 800*400 ST:X950Y440 Dust Collector Magnet Separator Grindstone balancer

If you have any questions about specifications, feel free to contact me. I will share a PDF file with you. Thank you .

Half through Grindstone diameter:φ250

Vertical type

Horizontal type

Horizontal type

Gantry 3MX1.5M

Horizontal type S/NO.981222

Horizontal type Grindstone diameter:φ305 Carrier type Control panel

1.Table-1500 X 4000 mm 2.Max. length of working piece-4500 mm 3.Width of working piece-1700 mm 4.Height of working piece-1350 mm 5.Distance between columns-2000 mm

◆Size of table work surface (length x width): 600 * 300mm ◆Distance from the top of the table to the bottom of the whetstone: 322.5/347.5mm (50/60Hz) ◆Standard chuck size (length x width x height): 600 * 300 * 80 mm ◆Maximum table left/right movement: 750mm ◆Table T groove (width x number): 16 * 3mm ◆Table left and right feed speed: 1 to 25 m/min ◆Maximum saddle front and rear movement: 340mm ◆Saddle front and back missing feed amount/stepless: 0.5 to 20mm ◆Continuous feed speed before and after the saddle: 0.1-0.6mm ◆Saddle front and rear handles (1 scale/1 rotation): 0.02/5mm ◆Whetstone head: automatic depth of cut 0.002~0.02mm 　　　　　　　　　Vertical fine movement 0.002 to 0.02mm 　　　　　　　　　Up and lower handle (1 scale/1 rotation): 0.002/0.5mm 　　　　　　　　　Vertical rapid traverse speed (50Hz/60Hz): 310/375 　　　　　　　　　Number of spark outs: 0 to 9 times ◆Whetstone: 50Hz outer diameter x width x inner diameter 355*38*127mm, rotation speed: 1500R.P.M 60Hz Outer diameter x width x inner diameter 305*38*127mm, rotation speed: 1800R.P.M ◆Electric motor: 3.7-4kW-P for grinding wheel shaft, 1.5-4kW-P for hydraulic pump, 0.2-4kW-P for vertical rapid traverse ◆Electrical capacity: 9kVA ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

500*1500mm