New Logan Threading Pickoff Back finish Universal conveyor New Plexiglas

Logan Threading Air Pickoff Back finish Universal conveyor Plexiglas

Air trip 5th Pickoff Back finish 3rd Shelf Univ Chip New plexiglas

Logan threading 5th Reaming Shelf 3rd & 6th Univ.chip New plexiglas

1975 to 1955(4) Threading Shelf slides 3 & 6 Pickoff Back finish Univ. conveyor Plexiglas

New spindle bearings Air trip thread Pickoff Back finish Universal chip

Thread 5th Reaming Shelf slides 3rd & 6th Univ. conveyor Plexiglas

1974 & 1969 Thrading 3rd & 6th shelf Accel ream Univ. conveyor Plexiglas

Reaming 5 slides Univ. conveyor Plexiglas

Threading Pickoff Back finish Universal Chip Plexiglas

Pickoff Back finish plex guards

1960's(3 machines) Reconditioned 5-slids

Air trip Thd 4th Pickoff Univ.conveyor Accro feed avail

FA10 High Speed Precision Automatic Lathe Features The spindle mechanism uses bearings to ensure high speed and stable accuracy. The installation of a threading error detection device ensures safe work management. The automatic material stop device automatically stops the machine at the end of material processing. The automatic material stop device automatically stops the machine at the end of material The machine automatically stops when material is finished, indicated by a red lamp. ● Large work space and easy chip disposal are outstanding. FUJI SEIKI Main Spindle The main bearing is a super-precision angular contact bearing. The spindle bearing is designed to be fixed to the spindle stand after adjusting the preload by using ultra-precision angular contact bearings for back alignment. The bearings are designed to be fixed to the spindle head for easy maintenance and The machine is designed to be fixed to the spindle head, using ultra-precision class angular contact bearings with back alignment and preload adjustment. and precision parts can be machined with high precision and stability. The machine is designed to be fixed to the main spindle for easy maintenance. Tool post The turrets are referred to as No. 1, No. 2, No. 3, and No. 4 tools in the clockwise direction, Each tool is arranged radially around the main spindle. The No. 1 tool moves only in the longitudinal and radial directions, while the No. 2 tool moves only in the radial direction. The No. 1 tool can also perform hole drilling, chamfering, grooving, and other operations simultaneously during the longitudinal feed process, making it very efficient for certain products. Each turret can be fine-tuned with a micro screw, allowing the cutter to be set accurately and quickly. The micro-screws on each turret allow for accurate and quick setting of the cutter. Swivel Arm This device, located on the cam shaft side, performs swivel and longitudinal movements. and performs material receiving, centering, and drilling. Centering table and threading device The drilling spindle is replaced for drilling, and the threading spindle is replaced for tapping and When a tap or die is used, the threading spindle is replaced with a threading spindle. Threading is performed by rotating the threading spindle at high speed in the same direction as the spindle. The threading spindle rotates at high speed in the same direction as the spindle, and the difference in rotation between the spindle and the threading spindle is used for threading. FA10 type is outstanding in terms of ease of use !

(3) Threading Pickoff Back finish Univ. chip 1 with new spindle bearings

Material gr forward approximately 12.7 mm square 9 mm hexagonal 11 mm gr turning length 100 mm Number of side cutters 5 20 speed ranges 1120-10000 rpm. 83 Qty. d. work spindle speeds 0,109-53,45 rpm weight 850 kg

Material gr forward approximately 12.7 mm square 9 mm hexagonal 11 mm gr turning length 100 mm Number of side cutters 5 20 speed ranges 1120-10000 rpm. 83 Qty. d. work spindle speeds 0,109-53,45 rpm weight 850 kg

number of turning tools : 5 - maxi bar diameter : 12 [mm] - headstock stroke with flat cam : 70 [mm] - headstock stroke with bell cam : 100 [mm] - spindle speed : 8000 [rpm] - dimensions : 1800 x 1150 [mm] - weight : 900 [kg]

bar maxi diameter : 16 [mm] - number of turning tools : 5 - standard headstock stroke : 80 [mm] - spindle speed : 5450 [rpm] - dimensions : 1900 x 900 [mm] - weight : 1240 [kg]

Max. 4000 rpm A 25 Diameter of work admitted 25.7 mm Max. turning length: with flat cames 70 mm Number of tool cutters 4 Spindle speeds: 550 rpm up to 4000 rpm Turret slide: number of tools 4 Diameter of tool holding fix 19 mm Distance max. to spindle 120 mm Voltage 50 Hz 3x 380 Volt Total power required 2.4 HP

TRAUB TB60 work area to D 60 mm / min speed range up to 1600 rpm. Machine weight 1.6 tons. Doppelsenkrecht and cross slide with 2x Sahlhalter 6-hole star turret with tool holders spindle-speed transmission weight feeder Very nice machine