Inventory List for Sale
All Categories：2026/09/28～2026/10/04：31
[MFR]COMAT
[Model]1F14DQV1.4LSX3
[Year]2011
COMAT 1F14 DQ V1.4 LSX3 OIL FILTRATION SYSTEM TECHNICAL CHARACTERISTICS: Manufacturer: COMAT Model: 1F14 DQ V1.4 LSX3 Year of manufacture: 2011 Type: Cutting oil superfiltration system Fluid: Neat cutting oil Nominal flow rate: 180 [L/min] Filtration rating: 3 to 5 [μm] Filtration surface area: 4.4 [m²] Filtration system: Filtration with filter aid Filter aid: Cellulose / mineral Compressed air pressure: 6 [bar] Power supply: 400 [V] Frequency: 50 [Hz] Auxiliary voltage: 24 [V] AC Maximum power: 5 [kW] Weight: 800 [kg] Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.
[MFR]FANUC
[Model]α-T21iFa
[Year]2012
FANUC 31i-MODEL A5 BT30 24000 Rpm T: 650*400 ATC 21 S: 500*400*330 High Column 100mm Automatic tool length measuring AI contour control 1 2-axis Rotary Table NIkken 5AX-2MT-105
[MFR]KAFO
[Model]RV-5135
[Year]2016
Year: 2016 Model: RV-5135 Controller: FANUC 0iMF (10.4” ) X/Y/Z axis travel: 5,100/3,500/1,100mm Spindle nose to table: 1,300mm Dist. between columns: 2,700mm Door height: 1,500mm Table size: 5,000x2,600mm Spindle speed: 6,000rpm (Gear driven) BT50 / 60ATC (H+V) X/Y axis linear guide way Auto head storage: 90 degree head Coolant thru spindle 50bar + filter X/Y/Z axis Heidenhain linear scales X/Y/Z axis ballscrew cooling Air blast thru spindle Spindle oil cooler Air conditioner Oil skimmer Chip conveyor
[MFR]KYOCERA
[Model]SVVBN2525M-11
[Year]
Small Tool Holder SVVB Type External/Copying Turning
[MFR]MAKINO
[Model]MCC2013VG
[Year]2011
Professional5 T:1,500 x1,200mm 0.0001degree A:1degree C:1degree HSK-A100 12,000 rpm ATC60 Through-spindle coolant (TSC) Tool length measurement sensor Workpiece measurement sensor Chip conveyor
[MFR]MITSUI SEIKI KOGYO
[Model]ZV22AX-R
[Year]
◆PRESS: 0.7MPa ◆VOLTAGE: 200/200/220V ◆50/60/60Hz ◆Dimensions: W1280*D750*H1570mm ◆Weight: 590kg ✤If there are any discrepancies between the specifications and the actual product, the actual product will take precedence.
[MFR]OKUMA
[Model]LH35-N
[Year]1983
OSP-P200L 14"chuck dia610x1500mm conveyor overhauled in 1983
[MFR]OKUMA
[Model]MB-56VA
[Year]2003
OSP-E100M BBT40 15,000 rpm Tool Length Measurement Touch Probe ATC30
[MFR]OTANI MACHINERY
[Model]Die-max 100E
[Year]
The machine is being offered for sale due to a reduction in production of the applicable product. We are pleased to offer it to you at the most competitive price. The frame and cylinder have been replaced and repaired. Reinforcement repairs using steel backing plates have been carried out on the cracked areas on both the front and rear sides of the cylinder. The anvil knockout mechanism has been filled in (disabled). There is a possibility that cracks exist inside the knockout section.
[MFR]SCHNEEBERGER
[Model]Gemini DMR
[Year]2014
CNC Tool grinding machine SCHNEEBERGER Gemini DMR TECHNICAL CHARACTERISTICS: Year of manufacturing: 2014 CNC control: FANUC 31i B5 Software installed: Quinto Qg1 Colour touchscreen: Yes Number of axes: 5 Stroke X axis: 380 [mm] Max. Stroke speed X axis: 20000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Y axis: 300 [mm] Max. Stroke speed Y axis: 5000 [mm/min] Resolution Y axis: 0.0001 [mm] Stroke Z axis: 280 [mm] Max. Stroke speed Z axis: 20000 [mm/min] Resolution Z axis: 0.0001 [mm] Table length: 500 [mm] Table width: 330 [mm] Grinding spindle attachment: HSK-50 Max. grinding wheel speed: 10000 [rpm] Grinding spindle motor power: 14 [kW] Max. diameter grinding wheel: 250 [mm] Internal workpiece spindle nose: ISO 50 Number of running hours: 12340 [h] Supply voltage: 400 [V] Rated current: 63 [A] Weight: 8100 [Kg] EQUIPMENT INCLUDED: x1 8-position grinding wheel changer x8 coolant supports x1 tool probe x1 FANUC LR Mate 200iC 5L 6-axis tool-loading robot x1 set of robot grippers x1 pallet for robotic tool loading/unloading x3 HEIDENHAIN linear scales on the X, Y and Z axes x1 electrical cabinet air-conditioning unit x1 spindle chiller x1 fire suppression system (to be inspected by the buyer through a qualified organization) x1 set of 4 lifting brackets x1 set of technical manuals x1 parameter backup on USB flash drive *The SCHUNK collet holder and the 2 grinding wheel holders shown in the photos are not included Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening/grinding tools such as milling cutters, taps and drills. Machines similar to the following brands: Blohm, ELB, Ewag, Favretto, Fenix, GER, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer and Walter. Also consider cylindrical and surface grinding machines, lathes, machining centres and milling machines.
[MFR]SUMITOMO ELECTRIC INDUSTRIES
[Model]WMM3033E
[Year]
[MFR]TOSHIBA CORPORATION
[Model]MPF-2114D
[Year]2002
TOSNUC-888.2 T:1800*1400 S2100*1400*715 10000Rpm ATC-24 BT50
[MFR]TSUNE SEIKI
[Model]TK5M-90PL
[Year]2007
HSS specification for non-ferrous metals (aluminum copper alloys brass etc.) 4m length
[MFR]TUNGALOY
[Model]SRACR2525M08
[Year]
S-Type TAC Bite for External Turning Screw-on Type SRACR/L
[MFR]YAMAZAKI MAZAK
[Model]VARIAXIS i-500
[Year]2020
◆Maximum workpiece dimensions: Diameter Φ500mm/Height 350mm ◆XYZ: 350*550*510mm ◆A-axis movement amount (table tilt/0.0001 degree index): -120°~ 30° ◆C-axis travel amount (table rotation)/0.0001 degree index): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end face to table center (table vertical): 40~550mm ◆Table load (equal distribution): 300Kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 [Special specifications] ・Preparation for installing hydraulic jig 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating ・Front door automatic opening/closing (with area sensor) ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.
[MFR]YAMAZAKI MAZAK
[Model]VARIAXIS i-500
[Year]2020
◆Maximum workpiece dimensions: Diameter Φ500mm/Height 350mm ◆XYZ: 350*550*510mm ◆A-axis movement amount (table tilt/0.0001 degree index): -120°~ 30° ◆C-axis travel amount (table rotation)/0.0001 degree index): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end face to table center (table vertical): 40~550mm ◆Table load (equal distribution): 300Kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 [Special specifications] ・Preparation for installing hydraulic jig 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating ・Front door automatic opening/closing (with area sensor) ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.
[MFR]YAMAZAKI MAZAK
[Model]VARIAXIS i-500
[Year]2020
◆Maximum workpiece dimensions: Diameter Φ500mm/Height 350mm ◆XYZ: 350*550*510mm ◆A-axis movement amount (table tilt/0.0001 degree index): -120°~ 30° ◆C-axis travel amount (table rotation)/0.0001 degree index): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end face to table center (table vertical): 40~550mm ◆Table load (equal distribution): 300Kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 [Special specifications] ・Preparation for installing hydraulic jig 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating ・Front door automatic opening/closing (with area sensor) ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.
[MFR]YAMAZAKI MAZAK
[Model]VARIAXIS i-500
[Year]2019
◆Maximum workpiece dimensions: Diameter Φ500mm/Height 350mm ◆XYZ: 350*550*510mm ◆A-axis movement amount (table tilt/0.0001 degree index): -120°~ 30° ◆C-axis travel amount (table rotation)/0.0001 degree index): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end face to table center (table vertical): 40~550mm ◆Table load (equal distribution): 300Kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 [Special specifications] ・Preparation for installing hydraulic jig 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating ・Front door automatic opening/closing (with area sensor) ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.
[MFR]YAMAZAKI MAZAK
[Model]VARIAXIS i-500
[Year]2019
◆Maximum workpiece dimensions: Diameter Φ500mm/Height 350mm ◆XYZ: 350*550*510mm ◆A-axis movement amount (table tilt/0.0001 degree index): -120°~ 30° ◆C-axis travel amount (table rotation)/0.0001 degree index): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end face to table center (table vertical): 40~550mm ◆Table load (equal distribution): 300Kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 [Special specifications] ・Preparation for installing hydraulic jig 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating ・Front door automatic opening/closing (with area sensor) ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.
[MFR]YAMAZAKI MAZAK
[Model]VARIAXIS i-500
[Year]2019
◆Maximum workpiece dimensions: Diameter Φ500mm/Height 350mm ◆XYZ: 350*550*510mm ◆A-axis movement amount (table tilt/0.0001 degree index): -120°~ 30° ◆C-axis travel amount (table rotation)/0.0001 degree index): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end face to table center (table vertical): 40~550mm ◆Table load (equal distribution): 300Kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 [Special specifications] ・Preparation for installing hydraulic jig 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating ・Front door automatic opening/closing (with area sensor) ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.
[MFR]YAMAZAKI MAZAK
[Model]VARIAXIS i-500
[Year]2019
◆Maximum workpiece dimensions: Diameter Φ500mm/Height 350mm ◆XYZ: 350*550*510mm ◆A-axis movement amount (table tilt/0.0001 degree index): -120°~ 30° ◆C-axis travel amount (table rotation)/0.0001 degree index): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end face to table center (table vertical): 40~550mm ◆Table load (equal distribution): 300Kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 [Special specifications] ・Preparation for installing hydraulic jig 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating ・Front door automatic opening/closing (with area sensor) ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.
