Inventory List for Sale
All Categories：2026/08/17～2026/08/23：69
[MFR]AMADA
[Model]CSW-220
[Year]1987
Processing capacity: 10 t; Max. plate thickness: 3.2 mm; Max. processing dimensions: Corner notch 220 × 200 / Edge notch 50 × 100
[MFR]BABA TEKKO
[Model]GWRP200
[Year]1996
Link motion press ST:200 45spm DH:300 ADJ:80 SL:1300*600 BL:1300*800
[MFR]BIG DAISHOWA
[Model]BPS8-0304
[Year]
[MFR]DAINICHI
[Model]DL530×150
[Year]2005
FANUC Series 20i-TB Basic NC 10" 3-jaw hollow chuck Distance between centers: 1,500 mm Spindle bore: dia77mm 1,700 rpm Front cover / Rear cover
[MFR]HITACHI KOKI
[Model]B13RH
[Year]
◆13mm ✤ In the event of any discrepancy between the specifications and the actual item, the actual item takes precedence.
[MFR]MAKINO
[Model]BN2-85
[Year]1997
Pro-A Table: 1350×575 Stroke: 850 (X) / 500 (Y) / 400 (Z) Spindle: NT50 4000 rpm
[MFR]MITSUBISHI MATERIALS
[Model]AQXR254SN25S
[Year]
[MFR]MORI SEIKI
[Model]MS-850
[Year]
◆Swing over bed (mm): 435 ◆Swing over cross slide (mm): 250 ◆Max. distance between centers (mm): 850 ◆Spindle bore diameter (mm): 52 ◆Tailstock sleeve taper: MT6 ◆Center taper: MT4 ◆Number of spindle speeds: 12 ◆Spindle speed range (min⁻¹, rpm): 32–1800 ◆Tailstock quill travel (mm): 150 ◆Center taper: MT4 ◆Total bed length (mm): 1880 ◆Spindle motor (kW): 3.7 (4P) / 5 (HP) ◆Machine weight (kg): 1935 ✤In the event of any discrepancy between the specifications and the actual machine, the actual machine takes precedence.
[MFR]NIKKEN KOSAKUSHO WORKS
[Model]CCK32-16
[Year]
Unopened Center Coolant Straight Collet CCK Collet
[MFR]OKAMOTO
[Model]PSG-125EX
[Year]2006
T:1250x500mm Magnetic separator Coolant tank
[MFR]OKAMOTO
[Model]OGM250UEXⅢ
[Year]2018
Okamoto PRECISION Dressing unit Separator Balancer 18,000 rpm / 25,000 rpm Flange
[MFR]OKK CORPORATION
[Model]MH-2V
[Year]1990
#2 Bed-type Vertical Milling Machine ◆Maximum machining travel (X, Y, Z) (mm): 720 * 260 * 360 ◆Table dimensions (L * W) (mm): 1,310 * 300 ◆Table slots (number and dimensions) (mm): 3 * 18H8 ◆Maximum load capacity (kg): 500 ◆Spindle taper (spindle nose diameter) (mm): JIS B6101 No. 50 (128.570) ◆Spindle speed (number of steps) (r.p.m.): 60–1,800 (12) ◆Machine weight (kg): 2,800 ◆Required installation area (mm): 2,410 * 1,620 ✤In the event of any discrepancy between the specifications and the actual machine, the actual machine takes precedence.
[MFR]OKK CORPORATION
[Model]VM5Ⅲ
[Year]2007
F-180is-MB T:1050×560 Stroke:X1020Y510Z510 Spindle:BT50 8000rpm ATC-30 Mist Collector
[MFR]OTANI MACHINERY
[Model]Hi-Blow 35E
[Year]
YOM: Unknown, Overhauled in 2013 The machine is in good condition. It is being sold because the work for which it was used has ended, and there are no plans to use it in the future. One piston rod is available as a spare part. No cracks. The frame is a split-type frame, which provides a structure that is less prone to cracking. The machine has a fast striking cycle. There is a possibility that some frame bolts and other bolts may be missing.
[MFR]SATO TEKKO
[Model]BCN-200
[Year]1996
• Type: Straight-side • Force: 200 ton • Stroke Length: 70 mm • Continuous Stroke Rate: 50 spm • Intermittent Stroke Rate: 30 spm (maximum) • Die Height: 460 mm • Slide Bottom Dimensions: 400 mm x 400 mm • Bolster Dimensions: 700 mm x 450 mm • Main Motor: 22 kW × 4P • Required Air Pressure: Guaranteed 5 kg/cm² • Cutting Specifications: • Material Diameter: φ30 to φ55 • Material Length: 5 m to 7 m • Cutting Speed: Intermittent 8 spm - Cutting Length Range: 600 mm to 1300 mm
[MFR]SOKUHANSHA
[Model]φ18(18H7).φ22(22H7).φ24(24H7)
[Year]
Set of 3 limit thread gauges: φ18 (18H7) φ22 (22H7) φ24 (24H7)
[MFR]SOKUHANSHA
[Model]
[Year]
4-Piece Limit Thread Gauge Set: φ2 (2H7) φ3 (3H7) φ4 (4H7) φ5 (5H7)
[MFR]SOKUHANSHA
[Model]
[Year]
7-Piece Limit Plug Gauge Set: φ5 (5H7) φ6 (6H7) φ8 (8H7) φ10 (10H7) φ12 (12H7) φ13 (13H7) φ14 (14H7)
[MFR]SOKUHANSHA
[Model]
[Year]
Set of 4 limit thread gauges: φ32 (32H7) φ34 (34H7) φ35 (35H7) φ47 (47H7)
[MFR]SOKUHANSHA
[Model]
[Year]
5-Piece Limit Thread Gauge Set: φ25 (25H7) φ26 (26H7) φ27 (27H7) φ29 (29H7) φ30 (30H7)
[MFR]SOKUHANSHA
[Model]
[Year]
Set of 5 limit thread gauges: φ17 (17H7) φ19 (19H7) φ20 (20H7) φ21 (21H7) φ23 (23H7)
[MFR]TAKEDA MACHINE TOOLS
[Model]US2N-LH
[Year]1992
#2 Bed-type Vertical Milling Machine ◆ Table size: 1350 * 320 mm ◆ Table T-slots (Qty * Width): 4 slots * 18 mm H8 (75 mm pitch) ◆ Table longitudinal travel (X): 850 mm ◆ Table cross travel (Y): 420 mm ◆ Spindle head vertical travel (Z): 400 mm ◆ Distance from spindle nose to table surface: (Vertical type) 5–405 mm ◆ Distance from spindle nose to column: (Horizontal type) 455 mm ◆ Spindle taper: JIS No. 50 ◆ Spindle speed change (Manual): 2-speed range (High/Low) with stepless speed variation ◆ Spindle speed: 35–1350 rpm ◆ Spindle motor: 5.5 kW * 4P ◆ Maximum load capacity: 300 kg ◆ Total machine weight: 3500 kg ◆ Required installation area: 2650 * 1935 mm ✤ In the event of any discrepancy between the specifications and the actual machine, the actual machine takes precedence.
[MFR]TERAL
[Model]CLF5-NQ4-TV-R-RS-I-D
[Year]
◆Fan ✤ In the event of any discrepancy between the specifications and the actual product, the actual product takes precedence.
[MFR]TUNGALOY
[Model]CNR0025R22
[Year]
Internal Threading Tool TAC Threading
[MFR]YAMAWA MFG
[Model]HT P3 M10×0.75, M10×1, M10×1.5
[Year]
Spiral Tapper 3-piece set HT P3: M10 x 0.75 M10 x 1 M10 x 1.5
[MFR]YAMAWA MFG
[Model]N-SP M10×1.5 (1 piece), M6×1 (3 pieces)
[Year]
Spiral Tapper 4-Piece Set: 1 x N-SP M10×1.5 3 x M6×1
[MFR]YAMAWA MFG
[Model]
[Year]
Spiral Tap 10-Piece Set: +SP P2 M4×0.7 M5×0.8; SP P2 M8×1 M8×1 M8×1.25 M8×1.25 M12×1 M12×1.25 M12×1.75 M16×2
[MFR]YAMAZAKI MAZAK
[Model]FABRI GEAR 220MkⅡ
[Year]2013
Mazak FX (Fanuc-31iL) 2500w Max. Round Pipe Dia: Φ 220 mm (Min: Φ 20 mm) Max. Square Pipe Dimensions: 152.4 mm Loader: 8 m Unloader: 8 m Touch probe
[MFR]YOSHIKAWA IRON WORKS
[Model]US-150
[Year]
◆ Hydraulic ◆ Riveting capacity (mm Φ): 6–15 ◆ Total height (mm): 1,824 ◆ Throat depth (mm): 210 ◆ Table area (Width * Depth) (mm): 294 * 244 ◆ Floor space (Width * Depth) (mm): 612 * 1,000 ◆ Stroke (Min.–Max.) (mm): 0–45 ◆ Pressing force (Max. kg): 2,500 ◆ Weight (kg): 680 ✤ In the event of any discrepancy between the specifications and the actual unit, the actual unit takes precedence.
