60t ST:150

Max workpiece width: 1000mm (R chamfer) / 500mm (slosh removal) Max workpiece height: 20mm Number of brushes: 6 Brush rotation speed: 400-1200rpm 200V 50/60Hz Dry type Includes 2 dust collectors (CFA-H240 CFA-H515)

200V Capacity:φ4～φ10φ T:480×310

Bending capacity: Thin-walled steel pipe (OD×T) 25.4×1.6 Thick-walled steel pipe (OD×T) 21.7×2.8 Bending radius: 100

DMG MORI SLIMline T:φ630×500 ST:X500Y450Z400 B-axis:-5°/+110° C-axis:360° Spindle:BT40 12000rpm ATC-60 Spindle through air Touch sensor 3D quick set Spindle operating time: 322h

Swing:430 23mm

Screw Air Compressor 7.5kw 90880h built-in dryer

Magnet V Block

Screw 15kw 22934h

Internal volume: 390L Max operating pressure: 1.08MPa

Screw 15kw 32757h

Screw 7.5kw 24588h

Digital Calipers Digimatic Calipers Measurement Range: 0-150

Drill Chuck for CNC

Drill Chuck for CNC

◆Control device: FANUC 18i-TA ◆Grinding hole diameter (mm): Φ6～150 ◆Grinding stroke (mm): 125 ◆Swing within chuck cover (mm): Φ260 ◆Swing on table (mm): Φ600 ◆Maximum travel of grinding wheel spindle feed (X-axis) (mm): 170 ◆Grinding wheel spindle feed (X-axis) grinding feed rate (mm/min): 0.001～10000 ◆Grinding wheel spindle feed (X-axis) rapid traverse speed (mm/ min): 10000 ◆Table left/right feed (Z axis) maximum travel distance (mm): 500 ◆Table left/right feed (Z axis) grinding feed rate (mm/min): 0.001 to 10000 ◆Table left/right feed (Z axis) rapid traverse speed (mm/min): 10000 ◆Minimum setting unit (X axis) (mm): Φ0.0001 ◆Minimum setting unit (Z axis) (mm): 0.0001 ◆Working spindle rotation speed (min-1): 100 to 850 ◆Work Spindle swivel angle (deg.): -5 to 15 ◆Grinding wheel rotation speed (standard attachment) (min-1): 20000 ◆Grinding wheel rotation speed (special attachment) (min-1): 10000 to 50000 ◆Motor (for spindle) (kW/P): 1.5/4 (with inverter) ◆Motor (for grinding wheel spindle) (kW/P): 2.2/2 ◆Motor (for X-axis) (W): 750 (AC servo motor) ◆Motor (for Z-axis) (W): 900 (AC servo motor) (Bomotor) ◆Distance from frame bottom to chuck center (mm): 1000 ◆NC device (number of control axes): Grinding wheel axis feed X-axis, table left/right feed Z-axis, simultaneous 2-axis control ◆Occupied volume (width * depth * height) (mm): 2535 * 1990 * 1640 ◆Body weight (kg): 2300 ◆Required power (including optional water supply device) (kVA): 8 ◆Included: Grinding wheel spindles 10000rpm, 15000rpm, 20000rpm, 30000rpm (4 pieces) ✤In case of discrepancies between specifications and the actual product, the actual product will take precedence.

3-axis digital (MITUTOYO KA200)

Control unit: FANUC 32i‑MB Table size: 1,400 × 400 mm Table T-slot dimensions: 54×11.8 mm (75 mm pitch) Travel: X 1,000 mm Y 505 mm Z 480 mm Distance from spindle end to table surface (vertical axis): 10～490 mm Distance from spindle center to table surface (horizontal axis): 15～495 mm Spindle speed: 35～1,350 rpm Spindle nose: NT50 Required floor space: 3,340 × 1,920 mm Height: 2,630 mm Machine weight: approx. 5,000 kg Operation panel: Standard / Guidance (conversational only) Manual taper handle included Coolant unit (30 L) Spindle lock mechanism Splash guard LED work light

2.5t

Control unit: MAZATROL SMOOTHC Maximum machining diameter: φ350 mm Maximum machining length: 514 mm Travel: X 195 mm Z560 mm Spindle speed: 5,000 rpm Spindle through‑hole diameter: φ76 mm Turret type: 12‑station drum turret Tailstock travel: 550 mm Required floor space: 2,630 × 1,980 mm Machine height: 1,700 mm Machine weight: 4,800 kg 8-inch hollow chuck BB‑208 (Kitagawa) Side‑discharge chip conveyor (hinge‑belt type) Automatic tool setter Coolant system – Power coolant (1.1 kW)

Mouth width:200