Inventory List for Sale

All Categories：2026/03/30～2026/04/05：69

◆Material Diameter: 51-type specifications: Φ8～Φ45mm (Φ51) H10～H38mm ◆Material Capacity: Φ10→30 pieces, Φ45→7 pieces, Φ51→6 pieces ◆Material Length: 4.0m ◆Remaining Material Disposal: Rearward extraction (remaining material length 70mm～500mm) ◆Feeding Speed: Forward maximum 350mm/sec, Reverse maximum 700mm/sec ◆Feeding Output: MAX 400N (40.8kgf) ◆Power Supply: AC200V 3PH 50/60Hz・2.0KVA ◆Air Source: 0.5～0.7Mpa (5～7kgf/cm²) ◆Oil Used: 4.0m → 65ℓ ◆Equipment Weight: 4.0m → 1,200kg ◆Body Length: 4,860 ◆Material Shelf Length: 4,030 ◆Leg Center Distance: 3,500 ◆Feed pipes are available in 42, 45, and 51 types as standard specifications; others are prepared to match the NC automatic lathe to which it is installed. ◆If the material diameter is larger than the maximum inner diameter of the finger chuck, please machine a step at the rear end of the material. ◆Setup replacement parts, options, and special specifications are handled separately. ◆Use the rotation speed according to the bending accuracy of the material. ✤In case of discrepancies between specifications and the actual product, the actual product will take precedence.

◆Base dimensions (mm): 620 * 970 * 120 ◆Column diameter (mm): 160 ◆Distance from outer surface of column to spindle (center) (mm) (max): 520 ◆Maximum vertical movement of column (mm) (max): 360 ◆Table dimensions (mm): 370 * 420 * 400 ◆Spindle hole taper (M.T): No.3 ◆Maximum vertical movement of spindle (mm): 150 ◆Drilling capacity (mm): Cast iron 32, Steel 28Φ ◆Threading capacity (mm): 6-22 6-16 ◆Motor (KW): 1.5 (2HP) ◆Spindle speed control: 8 stages ◆50Hz (rpm): 80, 120, 180, 275, 420, 630, 950, 1440 ◆60Hz (rpm): 95, 145, 215, 330, 505, 755, 1140, 1720 ◆Automatic feed speed control: 3 stages (mm): 0.08, 0.12, 0.16 ◆Net weight (kg): 550 ✤In case of discrepancies between specifications and the actual product, the actual product will take precedence.

◆Pressure Capacity: 3000kN ◆Stroke Rate: 25-50min-1 ◆Stroke Length: 250mm ◆Die Height (from top of bolster to bottom of slide): 600mm ◆Slide Adjustment Range: 150mm ◆Slide Dimensions (Left/Right * Front/Back): 1000 * 900mm ◆Bolster Dimensions (Left/Right * Front/Back * Thickness): 1000 * 1000 * 180mm ◆Machine Weight: 40800kg ◆Emergency Stop Time: 250ms ◆Maximum Stop Time: 285ms ◆Overrun Monitoring Device Setting Position: 15° ◆Allowable Upper Die Weight: 1500kg ◆Operating Ambient Temperature Range: 5-40℃ ✤In case of discrepancies between specifications and the actual product, the actual product will take precedence.

◆Pressure Capacity: 1500kN ◆Stroke Rate: 29-60 min-1 ◆Stroke Length: 200mm ◆Die Height (from top of bolster to bottom of slide): 420mm ◆Slide Adjustment Range: 100mm ◆Slide Dimensions (Left/Right x Front/Back): 700 * 550mm ◆Bolster Dimensions (Left/Right x Front/Back x Thickness): 1250 * 760 * 165mm ◆Emergency Stop Time: 140ms ◆Overrun Monitoring Device Setting Position: 15° ◆Allowable Upper Die Mass: 500kg ✤In case of discrepancies between specifications and the actual product, the actual product will take precedence.

◆Display Device: Full Matrix Fluorescent Display Tube (Emitting Color: Green) ◆Weight Display: 5 digits, character size approx. 20 * 40 mm ◆Weighing Trigger Function ◆Memory Registration Function (20 types) ◆Checker Function ◆Counting Function ◆Guidance Function ◆Data Storage ◆Storage Data Output ◆Command Communication ◆Maintenance Function ◆Waterproof Specification: Not waterproof ◆Operating Temperature and Humidity Range: -0 to 40℃, 20 to 85% RH or less (non-condensing) ◆Power Supply: AC 100 to 240V 50/60Hz ◆Power Consumption: 28W ◆Product Weight (main unit only): Approx. 3.3 kg ✤In case of discrepancies between specifications and the actual product, the actual product will take precedence.

Workpiece size: 1500 × 500 × 595 mm Table travel: 1750 × 560 mm Table size: 1550 × 500 mm Distance from table top to bottom of grinding wheel: 595 mm Chuck size: 1500× 500× 100 mm Allowable work mass (included chuck mass): 2500 kg (555 kg) Automatic downfeed amount (rough grinding): 0.001–0.05 mm (15 steps for rough grinding, 10 steps for fine grinding) Grinding wheel (OD×width×ID): φ510× 50×φ127 mm Grinding wheel speed: 1,100 rpm Required floor space: 5,500 × 3,010 mm Machine height: 2,200 mm Machine weight: 8,000 kg Vertical feed handle for the grinding wheel head Upper dresser Grinding wheel (with flange) Coolant unit with magnetic separator (120 L) Hydraulic unit (with automatic oil temperature control) Tool set

◆Table work surface size (mm): 605 * 600 ◆Table travel distance (mm): 800 * 652 ◆Distance from table top to grinding wheel bottom (standard grinding wheel) (mm): -2.5 to 497.5 ◆Standard chuck dimensions (mm): 600 * 600 * 100 ◆Maximum table load capacity (including accessories) (kg): 1500 ◆Table left/right (X-axis) ◆Left/right feed speed (average) (m/min): 3 to 25 ◆Column Forward and backward feed (Z-axis) ◆Manual forward and backward feed (feed amount per rotation of hand handle) (mm): 0.1/1.0/5.0 ◆Manual forward and backward feed (feed amount per division of hand handle) (mm): 0.001/0.01/0.05 ◆Automatic forward and backward feed (intermittent feed) (mm): 0.5 to 20 ◆Automatic forward and backward feed (continuous feed speed) (mm/min): 0.1 to 2000 ◆Grinding wheel head up and down feed (Y-axis) ◆Manual cutting depth feed (feed amount per rotation of hand handle) ) (mm): 0.01/0.1/1.0 ◆Manual cutting feed (feed amount per hand handle division) (mm): 0.0001/0.001/0.01 ◆Automatic cutting feed amount (rough grinding) (mm): 0.0001～0.03 ◆Automatic cutting feed amount (fine grinding) (mm): 0.0001～0.01 ◆Number of spark-outs (time): 0～10 ◆Up/down speed feed rate (mm/min): 0～1000 ◆Grinding wheel ◆Outer diameter * Width * Inner Diameter (mm): Φ400 * 50 * Φ127 ◆Rotation Speed (with stepless speed control for grinding wheel shaft) (min-1): 200-2500 ◆Motor ◆Grinding Wheel Shaft (kW): 7.5 ◆Hydraulic Pump (kW): 3.7 ◆Up/Down Feed (kW): 1.5 ◆Forward/Backward Feed (kW): 0.75 ◆Required Power (kVA): 20 ◆Net Weight (kg): 6300 ✤In case of discrepancies between specifications and the actual product, the actual product will take precedence.

{{ contactModal.id }}{{ contactModal.companyname }}{{ contactModal.title }}{{ contactModal.stockCode }}{{ contactModal.telephone }}{{ contactModal.inCharge }}