Capacity: 300L Max pressure: 0.97MPa Water pressure test: 1.46MPa

◆Controller: CNC-C00 ◆X-axis travel: 200 mm ◆Y-axis travel: 440 mm ◆Z-axis travel: 305 mm ◆A-axis travel: 5 to -95 degrees ◆C-axis travel: 360 degrees ◆Distance from table top to spindle end: 100 to 405 mm ◆Working surface size: Φ140 mm ◆Table top shape: ISO702-4 ◆Maximum load capacity: 40 kg ◆Maximum inertia: 0.32 kg/m2 ◆Spindle speed: 16,000 rpm n-1 specifications: 16 to 16,000 min-1 ◆ Spindle speed during tapping: Max. 6,000 min-1 ◆ Spindle taper hole: 7/24 taper No. 30 ◆ Maximum rotation speed: 2,000 min-1 ◆ Rapid traverse rate: X*Y*Z axes: 50*50*50 m/min ◆ Cutting feed rate: X, Y axes: 1 to 10,000 mm/min, Z axis: 1 to 20,000 mm/min ◆ Indexing speed: A×C axes: A axis: 60 mm, C axis: 200 min-1 ◆ Tool change rate Model: MAS-BT30 ◆Pull stud model: MAS-P30T-2 ◆Tool storage capacity: 22 ◆Maximum tool length: 200 mm ◆Maximum tool diameter: 80 mm ◆Maximum tool weight: 3 kg ◆Tool selection method: Random shortcut ◆Spindle motor (10 min/cont): 10,000 min-1 specification: 10.1/6.7 kW ◆Feed motors: X, Y axes: 1.0, Z axis: 1.8, A axis: 1.8 kW ◆Turning spindle motor: 4.2 kW ◆ Power Supply: AC200V±10%, 50/60Hz±1Hz ◆ Power Capacity (Continuous): 10,000 min-1, Specification: 9.5 kVA ◆ Air Pressure Source Operating Pressure: 0.4-0.6 MPa ◆ Air Pressure Source Required Flow Rate: 130 L/min ◆ Machine Height: 2,513 mm ◆ Floor Space Required: 1,280 * 3,641 mm (including chip conveyor) ◆ Machine Weight: 2,370 kg ◆Rear-Discharge Chip Conveyor ✤ In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

T:600x400mm Stroke:760x440mm 2,300rpm Grinding wheel OD:335mm ID:127mm thickness:38mm

◆Controller: MSX-805Ⅲ ◆Bed swing: 510mm ◆Maximum machining diameter: 420mm ◆Standard machining diameter: 176mm ◆Maximum machining length: 570mm ◆Bar work capacity: 33mm ◆X-axis travel: 245mm ◆Z-axis travel: 570mm ◆Spindle rotation speed: 60-6,000min-1 ◆Spindle tip shape: JIS A₂-5 ◆ Spindle Through-hole Diameter: 43mm ◆ Spindle Bearing Inner Diameter: 80mm ◆ Tool Post Mounting Capacity: 12 ◆ Tool Post Square Tool Shank Height: 20mm ◆ Tool Post Boring Bar Shank Diameter: 32mm ◆ Tool Post Indexing Time: 0.7 seconds ◆ Rapid Traverse Rate: X, Z: 24,000mm/min ◆ Jog Feed Rate: X, Z: 0-1,260mm/min ◆ Tailstock Travel: 340mm ◆ Tailstock Diameter: 85mm ◆ Tailstock Tapered Hole Type: MT4 (Rotary Center) (Ta) ◆Tailstock travel: 120mm ◆Spindle motor (30 min./continuous): 7.5/5.5kW ◆Feed motor: X: 1.5, Z: 2.0kW ◆Coolant motor (50/60Hz): 0.635/1.04kW ◆Power supply: 17.3kVA ◆Coolant tank capacity: 150L ◆Machine height: 1,814mm ◆Floor space required: 1,975*1,667mm ◆Machine weight: 3,390kg ✤If there are any discrepancies between the specifications and the actual product, the actual product will take precedence.

Control: OSP-P200M (Advanced One-touch IGF) Table: 560×1,300 Spindle: 6,000rpm, BT50,  ATC32 Travel: XYZ: 1,050×560×460 Distance from table top to spindle end: 150～610 ・Through-spindle coolant (1.5Mpa) ・Auto tool length offset/breakage detection ・Point master(BT50-PMC-160) ・No chip conveyor

BT40 32 tools with tool rack