INR 600000

Cap : 45Tons Stroke : 100mm Die Height : 255mm Adjustment : 60mm SPM : 90 Slide : 400 x 350mm Bolster : 800 x 450mm

Year: 2024 Model: EVO 42196 Surface lengths of rolls: 4,200mm Pre-bending capacity at 5 x top roll diameter and yield point 260 N/mm2: 34mm Rounding capacity at 5 x top roll diameter and yield point 260 N/mm2: 38mm Top roll dia.: 540mm Bottom roll dia.: 500mm Side rolls dia.: 365mm Smallest possible bending diameter with top roll Ø540mm: 595mm (depending on springback) Smallest possible bending diameter with interchangeable top roll Ø370mm: 410mm (depending on springback) Number of rolls: 4 Bearing of rolls: Self-aligning roller bearings Max. cylinder force against top roll: 3,245kN Material of rolls: 42CrMo4 (1.7225) Driven rolls in standard execution: 1 (Top roll) Driven rolls (optional): 2 (Top and bottom roll) Roll drive: E-motor with planetary gear box (Efficiency > 90%) Operating speed: 0-8 m/min, stepless adjustable Speed compensation between top and bottom roll: automatic, if the option two rolls drive is selected Adjustment of rolls: hydraulic Tilting of bottom and both side rolls for cone bending: Stepless from mobile control panel Installed electrical power (with all possible optional items): 55kW Power supply (in standard execution): 400V/60Hz/3 Phases Ambient temperature (in advanced execution): 0 ﾟC- 45 ﾟC Overall dimension (LXWXH) approx.. (without optional items): 7,460x2,060x2,390mm Total weight (without optional items): 35,060kg

Controller : OSP-P300M Table size: 1,000 x 460 mm Maximum load capacity: 700 kg Travel : X: 762 mm, Y: 460 mm, Z: 460 mm Distance between table and spindle nose : 150～610 mm 　　　　　 Spindle taper: BT40 (MAS-I) Spindle speed : 50～15,000 rpm ATC : 20 stations Required Floor space : 2,210 x 2,810 mm Machine height : 2,746 mm Machine weight : 6,300 kg Two internal coil conveyors (left and right, rear-mounted) 　　　　　 Cutting oil system (no chip conveyor) Cutting fluid cooling system (separate) 　　　　　 One-way positioning OSP suite Helical cutting Arbitrary angle chamfering

Fanuc-0iTD dia38mm Sub spindle Milling

φ760×4000 φ550 4 jaw independent chuck SONY scroll 　 Steady Rest×2