Inventory List for Sale

All Categories：2024/12/09～2024/12/15：43

◆Power supply: F-15T ◆Swing on bed: 650 ◆Swing on the carriage: 360 ◆Distance between centers: 1000 ◆Maximum processing length (H4 turret): 900 ◆Shape of spindle end: JIS A₁-11 ◆Main shaft front bearing diameter: Φ140 ◆Spindle through hole diameter: Φ85 ◆Spindle center: M.T.No.5 ◆Spindle rotation speed: Automatic 3 groups stepless 3~1800rpm ◆Shape of the turret: Square turret (250□) ◆X-axis movement distance: 380 ◆Z-axis travel distance: Same as center-to-center distance ◆Tailstock shaft diameter: Φ100 ◆Center hole diameter: M.T.No.5 ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

◆High speed type ◆Pressure capacity: 4-10 ◆Stroke length: 30-200 ◆Ram descending speed: 260 ◆Ram pressurization speed: 19.3 ◆Ram rising speed: 219.0 ◆Working pressure range: 42.4 to 106 ◆Open height: 359 ◆Shank hole: Φ32×60 ◆Power supply: 3Φ, AC200V, 10A ◆Motor output: 1.5 ◆Stroke type: Cut, inching, safety stroke ◆Operation method: Two-handed operation type ◆Working oil capacity: 35 ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

Control unit : FANUC Series F35i-MODEL B Table : 1,500×2,800 mm Travel (X, Y, Z) : 2,950×2,190×345 mm Distance from the top of the chuck to the end of the spindle (φ 200): 138～483 mm Max. work weight : 4,000 kg Spindle speed : 55～795 rpm Tool storage capacity : 4 stations Spindle tip : BT60 Two-sided restraint Cutter tip diameter (face milling): φ 200mm (Rough, finishing) φ 315mm (Finishing) Machine area : 4,700×8,200×3,230 mm Maintenance area : 6,300×9,260×3,230 mm Machine weight : 30,500 kg Electromagnetic chuck with hydraulic axim : 1,500x2,700 mm Manual pulse handle Operation panel side coil conveyor High speed spindle compatible

Control unit : FANUC Series F35i-MODEL B Table : 2,000×4,100 mm Travel (X, Y, Z) : 4,235×2,245×357 mm Distance from the top of the chuck to the end of the spindle (φ200): 138～495mm Max. work weight : 4,000 kg Spindle speed : 55～795 rpm Tool storage capacity : 4 stations Spindle tip : BT60 Two-sided restraint Cutter tip diameter (face milling): φ200mm (Rough, finishing) φ315mm (Finishing) Machine area : 4,750×11,100×3,400 mm Maintenance area : 6,300×11,100mm Machine weight : 39,000 kg Electromagnetic chuck with hydraulic axim : 2,000×4,000 mm Manual pulse handle Operation panel side coil conveyor High speed spindle compatible

《 Hours of operation: 400hrs.》 Control：OSP-P300LA (Interactive) Chuck: 15”Hollow(Kitagawa B-215A)、NC Turret:V12 Swing over bed:φ670 Distance between center：1520 Max.Turning Dia.×Length：φ430×1500 Spindle speed：3000min、 Spindle bore: φ112 Milling spindle speed: 6000min Travel:XZYC: 300x1590x140(±70)x360°(0.001°) Travel of Tailstock：1530 ・Tailstock sleeve extension：80 ・Tool pre-setter(Manual)　・Touch sensor(Renishaw RLP40) ・Absolute scale (X+Z+Ys axis) ・Mist collector can be installed ・Steady rest(φ20-150) ・Chip-conveyor ・Some milling&cutting holders are included (see photo)

◆Table work surface size: D580*W200 ◆Distance from table top to grinding wheel bottom: 397 ◆Standard chuck dimensions: D500*W200*H70 ◆Maximum left/right movement (manual): 600 ◆T-slot: W17 ◆Left/right feed speed (standard, hydraulic): 1-25m/min ◆Left/right feed handle (1 rotation): 88 ◆Maximum front/rear movement: 230 ◆Front/rear intermittent feed: 0.5-20 (infinitely variable) ◆Front/rear continuous feed speed: 0.1-0.6m/min ◆Front/rear handle feed (1 rotation): 5 ◆Front/rear handle feed (1 scale): 0.02 ◆Up/down feed speed (fast forward): approx. 400 ◆Up/down handle feed (1 rotation): 0.1 ◆Up/down handle feed magnification*1 (1 scale): 0.001 ◆Minimum setting unit up and down: 0.001 ◆Number of spark outs: 0-9 ◆Whetstone dimensions (outer diameter x width x inner diameter): 205*6-25*50.8 ◆Whetstone rotation speed: 3000/(50Hz), 3600/(60Hz) ◆For whetstone shaft: 2.2-2 ◆For hydraulic pump: 0.75-4 ◆For up and down feed: 0.1-2 ◆For dust collection: 0.4-2 ◆Power capacity: 7 ✤If there is a difference between the specifications and the actual product, the actual product will take precedence.

Overhauled in 2002. 1987 model. ・ Grindable workpiece diameter: Φ50 to Φ400 ・ Internal grinding: 400mm ・ End grinding: 400mm ・ Spindle tapered hole ・MT No4 ・ Spindle swivel angle: +15° to -5° ・ Spindle rotation speed: low speed: 0 to 155 min-1 ・ High speed: 0 to 575 min-1 ・ Headstock front/rear feed: 550 mm ・ Carriage table: maximum stroke: 800 mm ・ Swing above the carriage: 1000 mm ・ Grinding wheel table feed: 150 mm ・ End face grinding wheel diameter: Φ150 ・ Rotation speed: 3000 min-1 ・ Grinding wheel stroke: 300 mm

{{ contactModal.id }}{{ contactModal.companyname }}{{ contactModal.title }}{{ contactModal.stockCode }}{{ contactModal.telephone }}{{ contactModal.inCharge }}