SELLER PROFILE
DON LEWIS MACHINERY & EQUIPMENT INC.(DLME)Access: 1,007
1 ~ 20 of 27 POST
[MFR]BOEHRINGER
[Model]V800 15II
[Year]2012
[Location]California
[Price]
Heavy Duty From Aerospace Landing Gear Company Retrofitted in 2011/12 by Uptime Electronics with: Fanuc Oi-TD Control Swing Over Bed: 52" Distance Between Centers: 120" Spindle Bore: 8" Swing Over Cross Slide: 38" Swing Over Carriage: 44" Maximum Turning Capacity Full Length: 38" Automatic Turret Tool Positions: 8 Equipped With: 31" 4-Jaw Chuck Manual Chuck Steady Rest Boring Bar Holder Chip Conveyor Coolant System Special Features: New Chuck Guard Enclosure
[MFR]DOOSAN
[Model]VT1100M
[Year]2013
[Location]California
[Price]
Low Hours: 1,680 Live Milling Rotary Tool Spindle Speed: 3000 rpm Table Diameter: 39" Maximum Turning Diameter: 43.3" Maximum Turning Length: 39.4" Main Spindle Speed: 850 rpm X-Axis Travel: 22.8" Z-Axis Travel: 39.4" C-Axis Deg. 360 Deg. Rapid Traverse X-Axis: 787.4 ipm Rapid Traverse Z-Axis: 787.4 ipm Number of Automatic Tool Stations: 12 OD Tool Size: 1.3" Boring Bar Diameter: 3.2" Control: Fanuc 32i Model A
[MFR]FEMCO
[Model]WVL-12
[Year]1987
[Location]California
[Price]
Table Diameter: 49.21" Maximum Swing: 62.99" Maximum Turning Height: 49.6" Z-Axis Ram Stroke: 39.4" Ram Horizontal Travel: 51" Ram Cross Section: 8.6" x 8.6" Cross Rail Travel: 39.4" Table Speeds: 2.8-280 RPM Table Capacity: 11,000 Lbs. Maximum Torque: 10,845 Ft. Lbs. Spindle Motor Cont./30 Min: 50 HP/ 60HP Control: Fanuc OT
[MFR]KITAMURA
[Model]Mycenter 3Xif-SP
[Year]2004
[Location]California
[Price]
Control: Fanuc 16i-MB Table Size 16".1 x 34" X-Axis Travel 29.9" Y-Axis Travel 17.9" Z-Axis Travel 18" Distance Table Surface to Spindle Nose 5.1" to 23.2" Spindle Taper NST40 Rapids 1969 IPM Cutting Feed Rate 0 - 1417 IPM Automatic Too Changer Positions (Side Mount Type) 30 Tool Shank BT40 Max Tool Weight 17.6 Lbs. Tool Change Time 1.2 Seconds Chip to Chip With Tool Orientation 3.2 Seconds Spindle Motor 15 HP Spindle Speeds 10,000 RPM Equipped With: Spark Changer 180 Degree Rotating Pallet Changer
[MFR]FADAL
[Model]VMC6535-HT
[Year]2004
[Location]California
[Price]
Features: Full Box Ways Machine Travels X: 65" Travels Y: 35" Travels Z: 30" Spindle RPM: 10,000 RPM Spindle HP: 30 HP Vector Drive Tool Changer: (50) ATC Side Mount Taper: #40 Table Size: 75" x 35" Equipped With: Chip Conveyor Coolant 480 Volt 50/60 Hz 3 Ph Dimensions: 160" long 120" wide 118" tall plus the chip conveyor/coolant tank Weight Approximate: 30,000 Lbs.
[MFR]HAAS
[Model]VF-3YT/50
[Year]2011
[Location]California
[Price]
History: Very Clean from local Aerospace Cutting Aluminum. Travels X: 40" Travels Y: 26" Travels Z: 25" Spindle RPM: 10,000 RPM Spindle HP: 40 HP Tool Changer: (30) ATC Side Mount Taper: #50 Table Size: 52" x 23" Equipped With: Haas 4th Axis Probing Chip Auger Coolant Cart 208/230 Volt 50/60 Hz 3 Ph
[MFR]HAAS
[Model]VF-7D
[Year]2007
[Location]California
[Price]
History: Very Clean from local Aerospace Cutting Aluminum. Travels X: 84" Travels Y: 32" Travels Z: 30" Spindle RPM: 10,000 RPM Spindle HP: 20 HP Vector Drive Tool Changer: (24) ATC Side Mount Taper: #40 Table Size: 84" x 28" Equipped With: Linear Scales Chip Auger Coolant 208/230 Volt 50/60 Hz 3 Ph
[MFR]HAAS
[Model]VF3D
[Year]2007
[Location]California
[Price]
Travels X: 40" Travels Y: 20" Travels Z: 25" Spindle RPM: 10,000 RPM Spindle HP: 20 HP Vector Dual Drive Tool Changer: (24) ATC Side Mount Taper: #40 Table Size: 48" x 18" Equipped With: Wired for 4th Axis Chip Auger Coolant Cart 1MB Program Memory Remote Jog 208/230 Volt 50/60 Hz 3 Ph Dimensions: 123"L x 92"W x 125"H Weight Approximate: 14,000 Lbs.
[MFR]HAAS
[Model]VF4SS
[Year]2008
[Location]California
[Price]
Table Size: 52" x 18" X-Axis Travel: 50" Y-Axis Travel: 20" Z-Axis Travel: 25" Spindle Nose to Table Top: 7" to 32" Max. Table Load (evenly distrib.): 1,750 Lbs. Cutting Feed Rate All Axes: 0.1 to 833 i.p.m Spindle Speeds: 12,000 r.p.m. Spindle Taper: Cat-40 Spindle Motor: 30 h.p. Automatic Tool Changer Positions (Side Mount Type): 40 Features: 4th & 5th Axis Ready TSC 300 PSI Wireless Probe P Cool Remote Jog Coolant Filters APC Pallet Shuttle Sidemount Tool Changer
[MFR]DMG MORI
[Model]NHX4000-II
[Year]2015
[Location]California
[Price]
Features: Full 4-Axis 1400 Hours Celos Control Pallet Size: (2) 15.7" X-Axis Travel: 22.0" Y-Axis Travel: 22.0" Z-Axis Travel: 26.0" Automatic Tool Changer Positions: 240 Spindle Taper: Cat-40 Spindle Speeds: 15,000 rpm Spindle Motor: 41 h.p. Rapid Travers Rate: X,Y,Z 2362 ipm Pallet Change Time: 8 Seconds Pallet Load Capacity: 880 Lbs. Max. Workpiece Diameter/Height: 24.8" x 34.6" Max. Tool Diameter: 2.7"/6.6" Max. Tool Length: 17.7" Max. Tool Weight: 17.6 Lbs. Spindle Center to Table Top: 2.4" - 24.4" Spindle Nose to Table Center: 2.8" x 28.7" Control: Celos M730 OUM Equipped With: * Full 4th Axis (direct drive rotary table) * High Speed/High Precision Function II * High Output 15,000 rpm Spindle Dual Contact * Through Spindle Coolant * Tool Storage (240) Rack Type * Spindle Chiller * (5) Pallet Edge Locator * "In machine tool measuring" Table Touch Sensor, Metrol. * Add'N of Opt'l Block Skip 2-9 (Soft Key Type) * Add'l Workpiece Coordinate System 48 Sets * Signal Tower 4 layers red yellow green blue * Dry Anchor * Program Resolution Multiplied by 1/10 * Tool Offsets 999 in total * Workpiece Position Compensation for Rotary Axis * Coordinate System Rotation
[MFR]OKUMA
[Model]MC80
[Year]1999
[Location]California
[Price]
Pallet Size: 31.5" x 31.5" X-Axis Travel: 49.21" Y-Axis Travel: 39.37" Z-Axis Travel: 33.46" Number of Pallets: 2 B-Axis Rotation: 1�� Indexing Max Load Capacity (with APC): 3,520 Lbs Spindle Speed Range: 10 - 4500 RPM Features: Okuma OSP-7000M CNC Control 120-ATC Automatic Tool Changer #50 Taper Automatic Pallet Changer 220/480V 3 Phase 60Hz Electricals Chip Conveyor Equipped with (4) Pallets one has a Vertical 48"x40" Double T-Slotted Fixture Plate. Dimensions: By Request Weight: Approx: 50,700 Lbs
[MFR]MOORE
[Model]G18 CNC Series 1000
[Year]1985
[Location]California
[Price]
Control: CNC G1000 Point to Point Type Table Size: 11" x 24" Travels: 11" x 18" Grinding Wheels: 3/16" to 5" Spindle Speed 40,000 rpm Equipped With: Optional Extension Plate for doing Oversize Holes Mounting Holes for Various Diameter Ranges Dimensions: 120" L-R x 96" F-B x 105" High
[MFR]KMT
[Model]BMX 10
[Year]2010
[Location]California
[Price]
KMT Aqua-Dyne Blastmax Series 50 triplex positive displacement plunger pump system. Designed and manufactured to operate in continuous service at a related flow and pressure. The Series 50 is a compact mobile design pump for applications that require high pressure at lower flow rates such as hydrostatic testing. Equipped with GP VF Series Pump Design Pressure: 10,000 P.S.I. at 80��F Max. Allow. Work Pressure: 10,000 P.S.I. at 80��F. Min. Permissible Temp: 32��F S.O.NO. 442858 Test Pressure 10,000 P.S.I. Pump Spec. No. 61145046 Driver Spec. No. 61146830. Pump S/N 09323022 Driver S/N 409C456103 Wired for 460 Volt 3-Phase 60 Cycle Motor RPM 1575 Pump RPM 420 Comes with Operation and Maintenance Manual
[MFR]KALAMAZOO
[Model]20 RWF
[Year]
[Location]California
[Price]
Throat Depth:20" Motor:2 H.P. Features: Blade Welder Chip Blower
[MFR]SPEEDFAM
[Model]16B
[Year]1995
[Location]California
[Price]
Updated Electronics Good operating condition. Diameter of Upper Plate is 44-1/2" It's been removed from the Voltage 208 3-Phase 60 Cycle facility and put into storage Overall Dimensions: 63" L-R x 96" F-B x 115" High until sold. Approximate: 8,000 Lbs. We have video recently filmed under power a few days before we moved it out of the plant.
[MFR]SPEEDFAM
[Model]16B
[Year]
[Location]California
[Price]
Updated Electronics Good operating condition. Diameter of Upper Plate is 44" It's been removed from the Voltage 208 3-Phase 60 Cycle facility and put into storage Overall Dimensions: 68" L-R x 96" F-B x 115" High until sold. Approximate: 8,000 Lbs. We have video recently filmed under power a few days before we moved it out of the plant.
[MFR]SPEEDFAM
[Model]16B
[Year]
[Location]California
[Price]
Updated Electronics Good operating condition. Diameter of Upper Plate is 44" It's been removed from the Voltage 208 3-Phase 60 Cycle facility and put into storage Overall Dimensions: 63" L-R x 96" F-B x 115" High until sold. Approximate: 8,000 Lbs. We have video recently filmed under power a few days before we moved it out of the plant
[MFR]DAEWOO
[Model]GC255-2
[Year]
[Location]California
[Price]
Capacity 5,000 lbs at 24" Max Lift height 188" Lowered Height 81" Fork length 48" Approximate Weight 9178 lbs Features: Side Shift Hard Tires Runs great. Has leak on second stage cyclinder Hours: 1135.4