【❖Take a look at our video!❖】 FANUC16MC 2APC S:920*460*530 Pallet top to spindle end:200 to 730 T:900*400 25-8000rpm ATC40 Taper:NC5-85 Pallet changing method:Built-in With rigid tap ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

S:720*260*360 Table:1310*300 Maximum loading weight:500kg 60 to 1800rpm Power supply total capacity:7KVA ※Gear type ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

T:1650*380 S:920*350*450 taper:JIS B6101 No.50 45~1600rpm Power supply total capacity:14KVA ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

【❖Take a look at our video!❖】 Table:2450*460 S:1300*400*530 MT#50 Distance between the center of the spindle and the table:0 to 530 Spindle:16~1600rpm Traction motor output: 22KW*4P ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

T:1310*300　 S:720*260*450 60-1800rpm　 NT-50　 3axis digital scale

T:1310*300 S:720*260*360 60-1800rpm NT-50 3axis digital scale

Table:1650*380 S:920*350*450 Distance between the center of the spindle and the column surface:410 Main shaft hole:JIS B-6101 No.50 Spindle:45-1600rpm

OKK Mill Ⅱ ERAKURAKU pattern function T:1200*450　 S: 920*530*450 40-2000rpm 11Kw Arbor support TSUDAKOMA Index table RNA-320

FANUC31i-MODEL B S:1120*610*610 (high column) T:1300*610 500-30000min-1 HSK-E40 (compatible with two-sided restraint tools) ATC30 ※Through spindle ※Linear scale (XYZ) ※Touch sensor (tool length measurement & tool breakage detection) ※HQ control (AI contour control I) ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

FANUC 180is-MB ATC60 BT50 T: 2300×940 12000rpm S: 2060×940×820 Mist Collector Through coolant Sub Tank

FANUC16i S:1530*740*660 T:1550*740 BT50 MS ATC30 35～13000rpm ※2 signal lamps, no buzzer ※Compatible with oil hole holders ※Splash guard ceiling cover ※Oil gap ※Linear scale XYZ ※Add lighting ※Cutting fluid pump capacity increased by 1.1kw ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

Neomatic 750 T:1300×920mm BT40 12000rpm ATC40 X1120 Y920 Z560mm Chip conveyor Touch sensor system

Control：Neomatic 635(GMC Interactive） Table：1550×740 Spindle：13,000rpm、 BBT50、 ATC30 Travel：XYZ：1530×740×660 Distance from table to spindle end: 150〜810 ・Linear scale feedback(XYZ) ・Soft scale Ⅲ

FANUC 31i-MODEL B BT50 6000rpm T:1550 ×760 ATC30 S:1540×760×660 Touch Probe automatic tool length measuring Mist Collector

◆Control device: OKK FANUC Ai ◆Travel distance XYZ: 720*510*460 ◆Distance from table top to spindle end: 100-560 ◆Distance from column front to spindle center: 532 ◆Size of work surface (X-axis direction * Y-axis direction): 850*510 ◆Workpiece allowable mass: 800kg ◆Work surface shape (T-slot nominal dimension * spacing * number): T18*110*5 ◆Height from floor to table work surface: 850 ◆Rotation speed: 100-12000min-1 ◆Spindle end: No.40 ◆Bearing inner diameter: Φ65 ◆Pull stud (nominal number): MAS P40T-1 (45°) ◆Number of tools that can be stored: 20 ◆Maximum tool diameter (with adjacent tools): Φ78 ◆Maximum tool diameter (without adjacent tools): Φ110 ◆Maximum tool length (from gauge line): 300 ◆Maximum tool weight: Maximum 8/Average 5/Total 100 ◆Coolant for cutting oil: 240L [Special accessories] ◆Signal light: 3-light type Alarm: Red light with buzzer ◆Coil conveyor: 2 coil conveyors on the left ◆Air blow device ◆Each axis has a lubrication grease terminal ✤If there is a difference between the specifications and the actual product, the actual product will take precedence.