φ360*550 Turning speed:83~1800rpm Swing over tool post:φ210

Fanuc-16M 0.0001mm T:300*250 Table stroke:Z-200 V-135 Elevator-100 Spindle stock:X-170 Y-100 Rotate-±10 Platform:0-80mm　30-80spm Wheel:1,000-4,000rpm φ150*10*φ31.75 Screen:500*400mm Magnification:20・50

45T ST 60spm 140mm DH 290mm Adj 60mm die cushion with safety device as is

Swing:360 Center:500 through hole:32 Chuck7inch

◆Size of table work surface (length x width): 600 * 300mm ◆Distance from the top of the table to the bottom of the whetstone: 322.5/347.5mm (50/60Hz) ◆Standard chuck size (length x width x height): 600 * 300 * 80 mm ◆Maximum table left/right movement: 750mm ◆Table T groove (width x number): 16 * 3mm ◆Table left and right feed speed: 1 to 25 m/min ◆Maximum saddle front and rear movement: 340mm ◆Saddle front and back missing feed amount/stepless: 0.5 to 20mm ◆Continuous feed speed before and after the saddle: 0.1-0.6mm ◆Saddle front and rear handles (1 scale/1 rotation): 0.02/5mm ◆Whetstone head: automatic depth of cut 0.002~0.02mm 　　　　　　　　　Vertical fine movement 0.002 to 0.02mm 　　　　　　　　　Up and lower handle (1 scale/1 rotation): 0.002/0.5mm 　　　　　　　　　Vertical rapid traverse speed (50Hz/60Hz): 310/375 　　　　　　　　　Number of spark outs: 0 to 9 times ◆Whetstone: 50Hz outer diameter x width x inner diameter 355*38*127mm, rotation speed: 1500R.P.M 60Hz Outer diameter x width x inner diameter 305*38*127mm, rotation speed: 1800R.P.M ◆Electric motor: 3.7-4kW-P for grinding wheel shaft, 1.5-4kW-P for hydraulic pump, 0.2-4kW-P for vertical rapid traverse ◆Electrical capacity: 9kVA ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

Swing 500 Between centers 1500

◆Table work surface size: D580*W200 ◆Distance from table top to grinding wheel bottom: 397 ◆Standard chuck dimensions: D500*W200*H70 ◆Maximum left/right movement (manual): 600 ◆T-slot: W17 ◆Left/right feed speed (standard, hydraulic): 1-25m/min ◆Left/right feed handle (1 rotation): 88 ◆Maximum front/rear movement: 230 ◆Front/rear intermittent feed: 0.5-20 (infinitely variable) ◆Front/rear continuous feed speed: 0.1-0.6m/min ◆Front/rear handle feed (1 rotation): 5 ◆Front/rear handle feed (1 scale): 0.02 ◆Up/down feed speed (fast forward): approx. 400 ◆Up/down handle feed (1 rotation): 0.1 ◆Up/down handle feed magnification*1 (1 scale): 0.001 ◆Minimum setting unit up and down: 0.001 ◆Number of spark outs: 0-9 ◆Whetstone dimensions (outer diameter x width x inner diameter): 205*6-25*50.8 ◆Whetstone rotation speed: 3000/(50Hz), 3600/(60Hz) ◆For whetstone shaft: 2.2-2 ◆For hydraulic pump: 0.75-4 ◆For up and down feed: 0.1-2 ◆For dust collection: 0.4-2 ◆Power capacity: 7 ✤If there is a difference between the specifications and the actual product, the actual product will take precedence.

Fanuc-0T 10"open-center chuck(KITAGAWA B210) Tail stock

45TON/st70/100spm/DH270/手動AJ60/S400×350/B800×450/SE

INR 750000

Cap : 60Tons Stroke : 120mm Die Height : 290mm Adjustment : 70mm SPM : 45~80 Slide : 500x 400mm Bolster : 900 x 550mm

INR 650000

Cap : 55Tons Stroke : 120mm Die Height : 250mm Adjustment : 70mm SPM : 60 Slide : 480 x 350 Bolster : 800 x 450mm

INR 600000

Cap : 55Tons Stroke : 120mm Die Height : 250mm Adjustment : 70mm SPM : 73 Slide : x mm Bolster : 800 x 500mm

INR 500000

Cap : 50Tons Stroke : 120mm Die Height : 260mm Adjustment : 60mm SPM : 30~65 Slide : 390 x 300mm Bolster : 810 x 440mm

INR 4500000

Cap : 35Tons Stroke : 110mm Die Height : 250mm Adjustment : 55mm SPM : 35~60 Slide : 350 x 300mm Bolster : 700 x 400mm

INR 475000

Cap : 35Tons Stroke : 110mm Die Height : 250mm Adjustment : 65mm SPM : 95 Slide : 350 x 300mm Bolster : 700 x 400mm

Swing over bed:360 Center:550 Swing over cross table:210 Spindle:83～1500rpm(12-gears)

Swing over bed:470 Center:800 Swing over gap:700 Swing over cross table:240 Spindle:50～1500rpm(8-gears)

◆ Swing above bed: 460 ◆ Distance from faceplate to 185 mm: 510 ◆ Swing of front and rear feed table: 240 ◆ Maximum center distance: 800 ◆ Center height from floor: 1000 ◆ Spindle through-hole diameter: 51 ◆ Spindle hole taper: M.T. No. 6 ◆ Center taper: M.T. No. 4 ◆ Speed ​​change: 8 stages ◆ Rotation speed: 50-1200 rpm ◆ Front and rear feed table travel distance: 280 ◆ Upper feed table travel distance: 140 ◆ Front and rear feed handle scale: 0.025 per graduation ◆ Upper feed table handle scale: 0.02 per increment ◆ Center travel distance: 150 ◆ Center taper: M.T. No. 4 ◆ Maximum carriage travel distance: 765 ◆ Feed rate: 32 types ◆ Bed length: 1850 ◆ Bed width: 400 ◆ Spindle drive: 3.7kW 4P ◆ Overall length: 2170 ◆ Overall width: 960 ◆ Overall height: 1230 ◆ Approximate weight: 1900 ✤ In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

INR 450000

C FRAME SINGLE CRANK PRESS Cap : 35Tons Stroke : 90mm Die Height : 240mm Adjustment : 55mm SPM : 80 Slide : 380x 300mm Bolster : 710x 380mm