- HOME
- Select Machine Name
- Other Presses
Search Machinery
Other Presses
1 ～ 13 of 13 POST
[MFR]KOIKE KANAGATA
[Model]KRP-2300
[Year]2005
◆Motor Output: 3.7kW (5HP) ◆Machine Weight: 2500kg ◆Urethane Anvil: Hardness: 90°, Thickness: 7mm ◆Speed Control (Inverter Speed): 0-30m/min ◆Emergency Stop: Front and Rear, Mounted on Control Box ◆Start Method: Front and Rear, Foot Switch ◆Die Conveyor Belt: 2.5-inch Wide * 6 Belts ◆Urethane Surface Cleaning: Brush Device ◆Synchronization Method: Manual Push Handle with Square Screws ◆Effective Cutting Dimensions: Width: 2000mm, Depth Range: Approximately 3000mm or Less ◆Cutting Shut Height: 23.5mm Effective Cutting Range ◆Machine Base Area: 2910mm * 2400mm (With Spare Roller Conveyor Installed: 2910mm * 4400mm) ✤In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.
[MFR]OSTERWALDER
[Model]FPN 140
[Year]1982
Screw diameter: 140 mm Nominal power: 160 ton Max power: 320 ton Strokes per minute: 56 Slide stroke: 200 mm Ram-table distance: 450 mm Width between guides: 410 mm Ram-table height: -Max: 380 mm -Min: 200 mm Height of slide stroke: 180 mm Hole for stamp fastening in the slide: 40 H7 mm Clamping table: Dimensions of: -Upper clamping area: 400x360 mm -Table area: 400x400 mm Bolster plate depth: 50 mm T-slots: DIN 650 22 H8 Capacity: Motor power: 7,5 kW Number of revs of frictional disc: 470 rpm Number of strokes: 40-50 rpm Spindle: Spindle diameter: 140 mm Step: 96 mm Flywheel diameter: 750 mm Press weight: 4500 kg
[MFR]OTANI MACHINERY
[Model]DIE MAX 100E
[Year]
OTANI DIE-MAX 100E --- SPECIFICATIONS: Capacity 2 ton Standard Lower Die Weight 2,690 kg Standard Upper Die Weight 600 kg Minimum Safe Die Height 350 mm Maximum Stroke 1,200 mm Guide Clearance 630 mm Cylinder Bore Diameter 430 mm Piston Rod Diameter 160 mm Ram Bottom Size 630 (W) × 650 (L) mm Sow Block Top Surface Size 700 (W) × 750 (L) mm Impact Energy 9,900 kg·m Air Inlet Connection 125A (5B) Air Exhaust Connection 125A (5B) Height from Floor Level (F.L.) Approx. 5,435 mm Overall Machine Height 6,445 mm Height to Remove Piston Rod (from F.L.) 7,850 mm Required Air Compressor Capacity over 150 kW Maximum Operating Pressure 0.69 MPa (7 kg/cm²) --- CURRENT CONDITIONS: The machine is being offered for sale due to a reduction in production of the applicable product. The frame and cylinder have been replaced and repaired. Reinforcement repairs using steel backing plates have been carried out on the cracked areas on both the front and rear sides of the cylinder. The anvil knockout mechanism has currently been filled in (disabled). There is a possibility that cracks exist inside the knockout section.
[MFR]OTANI MACHINERY
[Model]Die-Max 200
[Year]2017
OTANI Die-Max 200 Hammer --- Standard Lower Die Weight: 2,690 kg Standard Upper Die Weight: 600 kg Minimum Safe Die Height: 350 mm Maximum Stroke: 1,200 mm Guide Clearance: 630 mm Cylinder Bore Diameter: 430 mm Piston Rod Diameter: 160 mm Ram Bottom Size: 630 (W) × 650 (L) mm Sow Block Top Surface Size: 700 (W) × 750 (L) mm Impact Energy: 9,900 kg·m Air Inlet Connection: 125A Air Exhaust Connection: 125A Height from Floor Level (F.L.): Approx. 5,435 mm Overall Machine Height: 6,445 mm Required Air Compressor Capacity: Over 150 kW Maximum Operating Pressure: 0.69 MPa (7 kg/cm²)
[MFR]OTANI MACHINERY
[Model]New Max 130
[Year]
NOTES: Only the anvil, cylinder, and frame are available. All other components will need to be newly manufactured. Manufacturing drawings can be provided.
[MFR]SCHULER MULLER
[Model]6 TONS / 8 TONS
[Year]2000
CNC SCHULER NOTCHING MACHINES TOTAL 3 NUMBERS FOR STATOR ROTOR STAMPING AND LAMINATION
[MFR]YAMAMOTO
[Model]TC-600-1W
[Year]2005
Hot Molding Press Top Ram Type Equiped with an electric oil heater for heating platens Platen:1250x1250mm Stroke:400mm approximately 120 degrees #A4229
