- HOME
- Select Machine Name
- Drilling Machines
- Upright Drill / Swing 500mm(19.7")~
Search Machinery
Upright Drill / Swing 500mm(19.7")~
1 ~ 8 of 8 POST

[MFR]ENKOH'S
[Model]EUD-500D
[Year]
Auto feeding Spindle vertical movement:140mm Table vertical movement:620mm Table diameter:φ400

[MFR]MORI SEIKI
[Model]YD2-55
[Year]
◆ Maximum swing: 550 mm ◆ Drilling capacity (S45C): 40 mm ◆ Drilling capacity (FC25): 50 mm ◆ Tapping capacity (S45C): M24 ◆ Tapping capacity (FC25): M30 ◆ Distance from spindle nose to table surface: 5–730 mm ◆ Distance from spindle nose to base surface: 915–1135 mm ◆ Vertical travel (automatic): 180 mm ◆ Vertical travel (manual): 220 mm ◆ Taper bore: M.T. No. 4 ◆ Number of spindle speed settings: 12 ◆ Spindle speed (50 Hz): 60–1270 rpm ◆ Spindle speed (60 Hz): 75–1525 rpm ◆ Number of feed settings: 3 ◆ Automatic feed rates: 0.10, 0.20, 0.30 mm/rev. ◆ Working surface dimensions: φ510 mm ◆ Vertical travel: 500 mm ◆ T-slot (nominal size): 16 mm ◆ Spindle motor: 1.5 kW, 4-pole ◆ Height: 2200 mm ◆ Required floor space (width × depth): 800 × 1200 mm ◆ Weight: 650 kg ✤ In the event of any discrepancy between these specifications and the actual unit, the actual unit shall take precedence.

[MFR]SUZUTA SEISAKUSHO
[Model]SS-540
[Year]
◆ Swing: 540 mm ◆ Drilling capacity (SC steel): 45 mm ◆ Drilling capacity (FC cast iron): 50 mm ◆ Tapping capacity (SC steel): M20 ◆ Tapping capacity (FC cast iron): M25 ◆ Spindle taper: M.T. No. 4 ◆ Spindle travel (manual): 170 mm ◆ Spindle travel (automatic): 150 mm ◆ Distance from spindle nose to table surface: 114 mm – 594 mm ◆ Distance from spindle nose to base surface: 550 mm – 1030 mm ◆ Table diameter: φ460 mm ◆ Column diameter: φ155 mm ◆ Number of spindle speeds: 6 ◆ Spindle speed (60 Hz): 70–1100 min⁻¹ ◆ Spindle speed (50 Hz): 60–915 min⁻¹ ◆ Number of automatic feed rates: 3 ◆ Feed per spindle revolution: 0.05–0.20 mm ◆ Spindle motor: 220 V, 1.5 kW, totally enclosed ◆ Base dimensions: 410 mm * 810 mm ◆ Total machine height: 1910 mm ◆ Approximate weight: 450 kg ✤ In the event of any discrepancy between these specifications and the actual unit, the actual unit shall take precedence.



[MFR]YOSHIDA
[Model]YD2-55
[Year]
Drilling:Steelφ40 Cast ironφ50 Screw:Steel M24 Cast iron M30 Swing:550

[MFR]YOSHIDA
[Model]YUD-540
[Year]
Capacity:φ40 M16 S:220 Swing:540 75-1525rpm MT-4T T:φ510

