Inventory List for Sale

All Categories：2026/08/03～2026/08/09：58

Year: 2015 Model: Mytrunnion-4G Controller: Arumatik-Mi (MITSUBISHI M735) X/Y/Z axis travel: 610/610/500mm X/Y/Z axis rapid feedrate: 50/50/25m/min A axis: +30°/-120° C axis: 360° Table dia.: Ø400mm Max. table load: 200kg Max. workpiece dim.: Ø550x400mm Table indexing: 0.001° Spindle speed: 40-15,000rpm (Direct driven) BBT40 / 60ATC X/Y/Z axis roller linear guide way X/Y/Z axis linear scale feedback system A/C axis rotary scale feedback system Coolant thru. spindle 70bar Tool pre-setter package A Spindle oil cooler Oil mist collector Chip conveyor + bucket

Year: 2015 Model: Vortex e1060V/8 Controller: Mazatrol Matrix 2 (19” LCD screen) X axis travel: 1,875mm (Working travel: 1,335mm) Y axis travel: 1,060mm Z axis travel: 1,345mm C axis indexing degree: 0.0001 degree B axis indexing degree: 0.0001 degree Pallet size: 1,000x1,000mm (2 APC) Spindle speed: 10,000rpm Spindle motor: 37KW (50HP) BBT50/ 80ATC X/Y/Z axis scale feedback system X/Y/Z axis ball screw coolers Touch sensor (RMP600) 7MPA thru coolant Spindle chiller Air thru mill spindle system Laser mill tool measurement Preparation for angular head Chip conveyor side disposal

OTANI DIE-MAX 100E --- SPECIFICATIONS: Capacity 2 ton Standard Lower Die Weight 2,690 kg Standard Upper Die Weight 600 kg Minimum Safe Die Height 350 mm Maximum Stroke 1,200 mm Guide Clearance 630 mm Cylinder Bore Diameter 430 mm Piston Rod Diameter 160 mm Ram Bottom Size 630 (W) × 650 (L) mm Sow Block Top Surface Size 700 (W) × 750 (L) mm Impact Energy 9,900 kg·m Air Inlet Connection 125A (5B) Air Exhaust Connection 125A (5B) Height from Floor Level (F.L.) Approx. 5,435 mm Overall Machine Height 6,445 mm Height to Remove Piston Rod (from F.L.) 7,850 mm Required Air Compressor Capacity over 150 kW Maximum Operating Pressure 0.69 MPa (7 kg/cm²) --- CURRENT CONDITIONS: The machine is being offered for sale due to a reduction in production of the applicable product. The frame and cylinder have been replaced and repaired. Reinforcement repairs using steel backing plates have been carried out on the cracked areas on both the front and rear sides of the cylinder. The anvil knockout mechanism has currently been filled in (disabled). There is a possibility that cracks exist inside the knockout section.

Year: 2022 Model: DG-320U5X Controller: Heidenhain 640 iTNC (15.1” LCD) With Kinematics Opt. function X/YU/Z axis travel: 3,000/2,000/1,100mm Dist. between columns: 3,800mm Max. job width: 3,650mm Spindle nose to table surface: 0-1,100mm (when A=0 degree) Spindle centre to table surface: 220-1320mm (when A-=90 degree) Table size: 2,800x2,000mm Table loading: 7,500kg/m2 German Cytec S8 A/C head: Spindle speed: 18,000rpm (Built-in driven) Spindle power: 18/23kw, 56/72Nm A axis: ±115 degree/0.0001 indexing C axis: ±360 degree/0.0001 indexing HSK-A63 / 24ATC X/YU/Z axis roller linear guide way X/YU/Z axis Heidenhain linear scales Coolant thru spindle 20bar Spindle air blast Blum TC-60 part measuring system Blum NT-A3 tool measuring system Spindle oil cooler Air conditioner Chip conveyor + bucket

{{ contactModal.id }}{{ contactModal.companyname }}{{ contactModal.title }}{{ contactModal.stockCode }}{{ contactModal.telephone }}{{ contactModal.inCharge }}