100T*3000, AMNC-IS, OH:370

◆Pressure Capacity: 110T ◆Stroke Rate: 60 SPM ◆Stroke Length: 150 mm ◆Die Height: 365 mm ◆Slide Adjustment: 100 mm ◆Slide Bottom Dimensions (L/R * F/A): 600 * 500 mm ◆Bolster Dimensions (L/R * F/A): 1100 * 700 mm ◆Emergency Stop Time: 200 ms ◆Overrun Monitoring Device Setting Position: 15° ◆Power Supply: 200V 3-Phase 60 Hz ◆Main Motor: 7.5 kW ◆Air Pressure: 5.7 kg/cm2 ✤In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

10"chuck Swing over bed: 500 Swing over cross table:290 Center:1500 Spindle turning speed:25～2000 11-gears 4-jaw chuck

Swing:254 Tapper:1～6mm

Swing:550 Drilling:40 Tapper:M20 MT4

◆Pressure capacity: 2000kN (200 tonf) ◆Stroke speed: 25-50 min-1 ◆Stroke length: 250 mm ◆Die height: 450 mm ◆Slide adjustment: 120 mm ◆Emergency stop time: 145 ms ◆Maximum stop time (light beam type): 170 ms ◆Overrun monitoring device setting position: 15° ◆Slide dimensions (left/right * front/back): 850 * 650 mm ◆Volta dimensions (left/right * front/back * thickness): 1450 * 840 * 190 mm ◆Maximum upper weight: 650 kg ✤If there are any discrepancies between the specifications and the actual product, the actual product will take precedence.

◆Controller: W21FAS-2 ◆Maximum workpiece dimensions (W * D * H): 1050 * 800 * 295 mm ◆Maximum workpiece weight: 1500 kg ◆Table dimensions: 780 * 630 mm ◆Axis travel (X * Y * Z): 500 * 350 * 300 mm ◆Table rapid feed speed: 1300 mm/min ◆Wire electrode diameter: 0.1 to 0.3 mm ◆Tapering device: Standard device ◆Axis travel (U * V): ±75 * ±75 mm ◆Maximum taper angle: 15° (for a plate thickness of 260 mm) (Note: This appears to be an error and should be omitted.) ◆Machine dimensions (W * D * H): 2013 * 2632 * 2100 mm ◆Weight: 3500 kg ◆Cutting fluid tank capacity: 740 L ◆Cutting fluid tank dimensions(W * D * H): 880 * 2085 * 1490 mm ◆Power supply unit (WFAS) ◆Power supply circuit: Transistor pulse circuit (stabilization circuit, AVR built-in) ◆Power supply dimensions (W * D * H): 550 * 600 * 1650 mm ✤In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

Swing:435 Center:850

Capacity: height 150*depth 300 T:500*500

OSP-P300L Hydraulic chuck N24(40"chuck is available) 12-station turret Conversational control Chip conveyor

FANUC-0i-TF 10"chuck ST:X230Z370 Tool post:T8 Chip conveyor Tool setter

mazatrol 640M T 800x800x 2pallets 10,000 rpm SPINDLE THRU Y 1060mm https://www.youtube.com/shorts/pF7i7v5hMjc https://www.youtube.com/shorts/1KTIcYeAJQM https://www.youtube.com/shorts/hiQp6oNJV3w ATC 80 BT 50 B AXIS 0.0001 　　C AXIS　0.0001

M-640T 6"hollow chuck 6000rpm 12-station turret Mill turning speed: 4500rpm Tool eye without coolant pump