Inventory List for Sale

All Categories：2024/07/15～2024/07/21：15

CNC Vertical Turning Lathe (VTL) Berthiez TFM 160N HP New in 1981 (original CNC) Retrofit 2006 NUM Axium Power CNC Control Faceplate/Chuck diameter 1650 mm Max. load 15000 kg (15 t) Max. turning diameter up to 350 mm height 1900 mm Max. turning diameter over 350 mm height 1880 mm Max. turning height 1600 mm Ram size 200 x 200 mm Ram cross travel X Axis -600 / +1100 mm Ram vertical travel Z Axis 1000 mm Feeds 0 - 6000 mm/min Cross rail vertical movement 1300 mm (100 mm steps) Table drive motor 55 KW Table speeds 2 - 250 rpm Tooling system CAPTO C 60 station automatic tool changer Tool diameter max. 150 mm Tool length max. 300 mm Tool weight max. 15 kgs High pressure coolant system up to max. 350 bar ! Chip conveyor Tool measurement system Good condition - from aerospace environment Very precise machine from aerospace and aviation company. Manufactured parts in titanium, inconel, aluminum. Proposal Number V(K)-6947

◆Control device manufacturer: Siemens ◆Control device: S840Dsl ◆Operation panel type: ERGOline (21.5) ◆Spindle (1st spindle) rotation speed: 15000min-1 ◆Spindle taper: No. 40 taper ◆Spindle taper(#40): 7/24 taper (2-sided constraint)#40 ◆Standard (pull stud): JIS B 6339 40P ◆Spindle taper hole: No.40 ◆Number of tools: 30 ◆Scale: Magnescale ◆Coolant air blast switching device: Yes ◆Travel amount: X500*Y450*Z400mm ◆Distance from table top to spindle end (when table is horizontal): 150(5.91)-550(21.65)mm ◆B-axis travel amount (table tilt): -5- 110° ◆C-axis movement amount (pallet rotation): 360° ◆Height from floor to table top: 789(31.06)mm ◆Size of table work surface: Φ630(24.80)*500(19.69)mm ◆Maximum loading mass of table: 300kg (661lb.) ◆Minimum table indexing angle (B, C axis): Any 0.001° ◆Maximum swing diameter of workpiece: Φ540(Φ21.26)mm ◆Workpiece maximum height: 445(17.52)mm ◆Table rotation speed: B, C: 20min-1 ◆Number of tools stored: 30 ◆Spindle motor 15000min-1: 22 (40% rating)/16 (continuous rating) kW ◆Machine height: 2810mm (at delivery: 2521mm) ◆Required floor size: 2197*2466 mm (30 pieces specification: not including chip conveyor and operation panel) ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

◆Size of table work surface (length x width): 600 * 300mm ◆Distance from the top of the table to the bottom of the whetstone: 322.5/347.5mm (50/60Hz) ◆Standard chuck size (length x width x height): 600 * 300 * 80 mm ◆Maximum table left/right movement: 750mm ◆Table T groove (width x number): 16 * 3mm ◆Table left and right feed speed: 1 to 25 m/min ◆Maximum saddle front and rear movement: 340mm ◆Saddle front and back missing feed amount/stepless: 0.5 to 20mm ◆Continuous feed speed before and after the saddle: 0.1-0.6mm ◆Saddle front and rear handles (1 scale/1 rotation): 0.02/5mm ◆Whetstone head: automatic depth of cut 0.002~0.02mm 　　　　　　　　　Vertical fine movement 0.002 to 0.02mm 　　　　　　　　　Up and lower handle (1 scale/1 rotation): 0.002/0.5mm 　　　　　　　　　Vertical rapid traverse speed (50Hz/60Hz): 310/375 　　　　　　　　　Number of spark outs: 0 to 9 times ◆Whetstone: 50Hz outer diameter x width x inner diameter 355*38*127mm, rotation speed: 1500R.P.M 60Hz Outer diameter x width x inner diameter 305*38*127mm, rotation speed: 1800R.P.M ◆Electric motor: 3.7-4kW-P for grinding wheel shaft, 1.5-4kW-P for hydraulic pump, 0.2-4kW-P for vertical rapid traverse ◆Electrical capacity: 9kVA ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

{{ contactModal.id }}{{ contactModal.companyname }}{{ contactModal.title }}{{ contactModal.stockCode }}{{ contactModal.telephone }}{{ contactModal.inCharge }}