Inventory List for Sale
All Categories：2024/05/13～2024/05/19：22
[MFR]AMADA
[Model]HFA-400
[Year]1992
Cutting capacity: round material φ420 square material 415*415
[MFR]AMADA
[Model]M-2045
[Year]1990
4.5t*2000 Auto BG Air sheet support Blade top and bottom corrected and polished (remaining 4 sides)
[MFR]DAINICHI KINZOKU KOGYO
[Model]DHK75*150
[Year]1983
[MFR]KAWARAGI MFG
[Model]MK-32DU
[Year]
◆Grinding range: 3Φ～32Φ(m/m) ◆Tip angle: 60° to 180° ◆Table stroke: 145 (m/m) ◆Whetstone stroke: 50 (m/m) ◆Whetstone dimensions (outer diameter x width x wall thickness x hole diameter): 125Φ＊50＊16＊31.75Φ (m/m) ◆Whetstone type: Cup-shaped PA80K and others ◆Main motor: 0.75KW＊4P ◆Whetstone rotation speed (50/60Hz): 3300rpm/3800rpm ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.
[MFR]KITAGAWA IRON WORKS
[Model]KDS-410
[Year]
◆Drilling capacity: Cast iron, 20mm (4P) Steel, 16mm (4P) ◆ Taper at spindle end: M.T.No.2 ◆Spindle rotation speed (rpm) 50Hz: 4P 400.650.1150.2000 60Hz: 4P 480.780.1360.2400 ◆Corner table: 270＊270mm ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.
[MFR]MORI SEIKI
[Model]NL2000MC/500
[Year]2004
MSX805Ⅲ 8"chuck Center: 500 with milling Max processing diameter: 356 Max processing length: 510 Spindle turning speed: 5000 Rotary tool: 6000rpm Tail stock table without chip conveyor
[MFR]NICHIREN
[Model]NST-14B
[Year]
◆Screw standing ability: 15Φ ◆Drilling capacity: 20Φ ◆Spindle taper: M.T.No2 ◆Spindle stroke: 80 ◆Spindle table spacing: 470 ◆Table work surface: 340Φ ◆Column diameter: 75Φ ◆Rotation speed: 60Hz 110-1280 ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.
[MFR]NICHIYU
[Model]FBS-20-75-300
[Year]2006
NICHIYU side fork FBS-20-75-300 horizontally mounted Hour meter: 1108 5 tires 8 bearings 1 short part Battery and its short parts replaced with new ones
[MFR]NIIGATA ENGINEERING
[Model]2UMB
[Year]
[MFR]NISSAN
[Model]AHC01
[Year]1998
1t Body number: AHC01L10G Max load: 1000 Max lifting height: 3000
[MFR]OKUMA
[Model]MB-56VA
[Year]2018
OSP-P300MA T:1300x560mm X1050 Y560 Z460mm thru spindle touch probe Chipconveyor SN：212867
[MFR]OOYA MACHINERY WORKS
[Model]RE2-1300
[Year]
◆Maximum distance between column surface and main axis: 1330 ◆Left-right movement distance of spindle head: 1065 ◆Arm vertical movement stroke: 660 ◆Base working area: 740＊1350 ◆Spindle Morse Steeper: No.4 ◆Spindle vertical stroke: 300 ◆(50/60Hz)32~1655rpm/38~1985rpm ◆Table dimensions: 650 ＊ 450 ＊ 400 ◆Drilling capacity: Cast iron 40, Steel 35 ◆Boring capacity: cast iron 100, steel 70 ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.
[MFR]TOSHIBA MACHINE
[Model]MGC-315B
[Year]1998
TOS888 T:3000×1500 Plain type S(X/Y/Z)：3000×1400×800mm milling spindle
[MFR]TUDA SEISAKUSHO
[Model]TFL-1600
[Year]
1600*1750 Swing over bed: 1200 Swing over saddle: 850 Width in gap (from chuck face): 1600 Bed width: 750 Bed length: 3500
[MFR]YAMAZAKI MAZAK
[Model]VARIAXIS630-5X
[Year]2003
Controller: M640M5X ATC-30 BT40 Spindle: 12000rpm Stroke: X430Y760Z500 Chip conveyor
[MFR]YAMAZAKI MAZAK
[Model]VCN-510CⅡ
[Year]2008
Mazatrol-MATRIX PRECISION NEXUS T:1300*550 S:1300*550*1050 ATC-30 12000Rpm
[MFR]
[Model]Hitachi
[Year]1983
370mm ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.