Inventory List for Sale

All Categories:2023/05/29~2023/06/04:17

[MFR]FOURSTAR

[Model]FD1842

[Year]2009

FOURSTAR (YONGJU) XYZ:4200x1800x800,Controller;FANUC 0iMC,BT50,ATC:32T

[MFR]KAWAMATA SEIKI

[Model]KD315S

[Year]2011

300kw 440V not used

[MFR]KAWAMATA SEIKI

[Model]KD355M

[Year]2008

400kw 440V not used

[MFR]MORI SEIKI

[Model]NH5000/40

[Year]2005

MSX-501(F-18iMB) T:500*500 2APC 0.001 degree indexing ST:X630Y600Z670 Spindle:BT40 14000rpm ATC-60 Chip conveyor Center through scale XYZ touch sensor

[MFR]NIPPEI TOYAMA

[Model]ZV5500

[Year]2007

F-18iMB T:1300×620mm max work weight:500kg  S(XYZ):1120×560×560mm   8,000rpm BT50

[MFR]OGAWA IRON WORKS

[Model]HOR-1500

[Year]

MT-5 30-1500rpm Column ~ Spindle center:345-1525 Spindle end ~ Base surface:365-1430

[MFR]OKUMA

[Model]MB-46VAE

[Year]2007

[Mold/fine feed specifications] OSP-P200M-H 3D-D 50~20000min-1 Tool shank:HSK-A63 T:460*1000 High cross specification: 200mm raised ATC:48 ※Through-spindle coolant ※Spindle thermal displacement control TAS-S ※Environmental thermal displacement control TAS-C ※Absolute scale detection (mold): XYZ axes ※NC rotary table mounting (additional 2 axes) (KITAGAWA TT182HJ-01) ※DNC coupling DNC-DT ※Super-NURBS function available ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

[MFR]OKUMA

[Model]MB-56VB-H

[Year]2004

OSP-E100M-H 3D-D MC 50~12000min-1 Tool shank shape: MAS standard BT50 T:560*1300 High-cross specification 200mm raised floor ATC:32 ※Lighting equipment: Fluorescent lights replaced with spotlights ※Spindle end face restraint: Spindle BIG Plus ※Spindle thermal displacement control TAS-S ※Environmental thermal displacement control TAS-C ※Absolute scale detection: XYZ axes ※NC rotary table mounting (additional 2 axes) ※Inclined circular table  ※Includes automatic tool length compensation and breakage detection (touch sensor) ※Touch sensor floor for high cross (200mm) ※Touch sensor position Table rear left side ※High class (simultaneous 5-axis control device) H specification ※DNC coupling DNC-DT 1G ※Super-NURBS function available ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

[MFR]OKUMA

[Model]MU-400VA

[Year]2007

OSP-P200M-H for 3D-D MC S:762*460*460 A axis:20 to -110 degrees C-axis:360 degrees Rapid traverse speed (mold specifications): XYZ 20m/min (mold) Rapid traverse speed:A-axis 14400 degrees/min Rapid traverse speed:C-axis 18000 degrees/min Cutting feed rate (mold specifications): XYZ 20m/min (mold) 50~20000min-1 HSK-A63 Table:φ400 ATC:48 ※Through-spindle coolant ※Spindle thermal displacement control TAS-S ※Environmental thermal displacement control TAS-C ※Absolute scale detection (mold) XYZ axes ※Automatic tool length compensation ※High class (simultaneous 5-axis control device) H specification ※DNC coupling DNC-DT ※Super-NURBS function Type-A (XYZAC) ※Fixture offset ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

[MFR]OKUMA

[Model]MU-400VA

[Year]2006

OSP-P200M for 3D-D MC S:762*460*460 A axis:20 to -110 degrees C-axis:360 degrees Rapid traverse speed:XY40 Z32m/min Rapid traverse speed:A-axis 14400 degrees/min Rapid traverse speed:C-axis 18000 degrees/min Cutting feed rate:XYZ 32m/min 50~20000min-1 Tool shank shape:HSK-A63 Maximum tool length:300 Table:φ400 Maximum work size:φ400*H400 ATC:48 ※Through-spindle coolant (medium pressure type 1.5 MPa) ※Cutting fluid heating and cooling device ※Spindle thermal displacement control TAS-S ※Environmental thermal displacement control TAS-C ※Absolute scale detection XYZ ※Automatic tool length compensation including breakage detection (touch sensor) ※High class (simultaneous 5-axis control device) H specification ※DNC coupling DNC-DT ※Super-NURBS function Type-A (XYZAC) ※Fixture offset ※With Showa Denki CRD-750R filter ※ATC tool length 300L specification ※A/C axis swivel table: 0.001 degree (with rotary inductor) ※C-axis table:φ400 T groove 18h7 x 6 ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

[MFR]OKUMA

[Model]MU-400VA

[Year]2006

OSP-P200M-H for 3D-D MC S:762*460*460 A axis:20 to -110 degrees C-axis:360 degrees Rapid traverse speed: XY40 Z32m/min Rapid traverse speed: A-axis 14400 degrees/min Rapid traverse speed: C-axis 18000 degrees/min Cutting feed rate: XYZ 32m/min 50~20000min-1 Tool shank shape:HSK-A63 Maximum tool length:300 Table:φ400 Maximum work size:φ400*H400 ATC:48 ※Oil controller ※Through-spindle coolant (medium pressure type 1.5 MPa) ※utting fluid heating and cooling device ※Spindle thermal displacement control TAS-S ※Environmental thermal displacement control TAS-C ※Absolute scale detection XYZ ※Automatic tool length compensation including breakage detection (touch sensor) ※High class (simultaneous 5-axis control device) H specification ※DNC coupling DNC-DT ※Super-NURBS function Type-A (XYZAC) ※Fixture offset ※With Showa Denki CRD-750R filter ※ATC tool length 300L specification ※A/C axis swivel table: 0.001 degree (with rotary inductor) ※C-axis table: φ400 T groove 18h7 x 6 ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

[MFR]OST

[Model]HR-1600S

[Year]

◆Spindle motor capacity, output: 4kw ◆Spindle motor speed, 60Hz: 1740r/min ◆Frame dimensions: W630×D600×H535 ◆Opening capacity: 50mm ◆Arm length: 1600mm ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

[MFR]TAKISAWA MACHINE TOOL

[Model]TAL

[Year]1967

KITAGAWA SK-7 chuck ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

[MFR]TECHNO FRONTIER

[Model]DYC-303-3A [NEW]

[Year]

JPY 110,000

BT50 Upper:16 Inside the left warehouse:9 bottles each in the upper and lower rows ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

[MFR]TOKYO TECHNICAL INSTRUMENTS

[Model]TF-40NC

[Year]

Spur gears with a hole or shaft、 Module range 0.2~2.0、 Center distance 25~130mm、 Spindle steplessly variable、 Measurement magnification ×100×200×…1000、 2-axis NC Control axis、 (Manufacturing NO.9005)、 Tokyo technical Retrofit

[MFR]YASKAWA ELECTRIC

[Model]GBDR-K

[Year]2004

500kw 440V not used

[MFR]YASKAWA ELECTRIC

[Model]GBDR-K

[Year]2004

400kw 440V not used

{{ contactModal.id }}{{ contactModal.companyname }}{{ contactModal.title }}{{ contactModal.stockCode }}{{ contactModal.telephone }}{{ contactModal.inCharge }}