SELLER PROFILE
Wisconsin Metalworking Machinery Inc.(Wismet)Access: 797
1 ～ 7 of 7 POST
[MFR]HARDINGE
[Model]COBRA 42
[Year]1997
[Location]Wisconsin
[Price]
SWING OVER BED............ 21" MAX TURNING DIA........... 8.25" SPINDLE NOSE.............. A2-5 TRAVELS: X......................... 7.75" Z......................... 14" RAPID TRAVERS RATE: X......................... 400 IPM Z......................... 630 IPM SPINDLE SPEEDS............ 50-5000 RPM SPINDLE MOTOR............. 7.5 HP AC DIMENSIONS (APPROX)....... 90" X 72" X 72 WEIGHT (APPROX)........... 6500 LBS. EQUIPPED WITH: FANUC 21 T CONTROL
[MFR]HARDINGE
[Model]CONQUEST 42
[Year]1995
[Location]Wisconsin
[Price]
SWING OVER BED: --------------- 21" SPINDLE NOSE------------------- A2-5" MAX. TURNING DIA.: ------------ 8.25" TRAVELS: X AXIS: ----------------------- 7.75" Z AXIS: ----------------------- 14" RAPID TRAVERSE RATE: X AXIS: ----------------------- 400 IPM Z AXIS: ----------------------- 630 IPM SPINDLE NOSE: ----------------- A2-5 ROUND 16C COLLET THROUGH CAP: - 1.625" SPINDLE SPEEDS: ---------- 50 - 5,000 RPM SPINDLE MOTOR: ---------------- 10 HP AC TURRET TYPE: ------- 30mm VDI 12 STATION DIMENSIONS APPROX----------90" X 72" X 72"H WEIGHT APPROX------------------ 7500 LBS EQUIPPED WITH: FANUC 18T 32-BIT CNC CONTROL WITH 9" CRT RS-232C PORT INTERFACE FOR DNC OPERATION
[MFR]MORI SEIKI
[Model]SL-8
[Year]1980
[Location]Wisconsin
[Price]
YEAR REBUILT/RETROFITTED..................... 1998 SWING OVER BED............................... 39.3" MAX. LONGITUDINAL TRAVEL..................... 43.3" MAX. CROSS TRAVEL............................ 16.5" HOLE THRU CHUCK.............................. 12.5" HOLE THRU SPINDLE............................ 10.2" HOLE THRU REAR CHUCK FLANGE.................. 9.25" SPINDLE NOSE................................. A1-20 RPM RANGE HIGH A RANGE............................... 21 - 553 RPM B RANGE............................... 9 - 224 RPM LOW C RANGE............................... 10 - 249 RPM D RANGE............................... 4 - 101 RPM HEIGHT FROM FLOOR TO SPINDLE CENTER LINE..... 49.2" TURRET POSITIONS............................. 6 SIDED APPROXIMATE WEIGHT........................... 37,000 LBS SPINDLE HORSEPOWER........................... 60 EQUIPPED WITH: 32" MANUAL 4 JAW CHUCK FANUC 21 CNC CONTROL FANUC DRIVES COOLANT SYSTEM CHIP CONVEYOR MISC TOOL HOLDERS SPECIFICATIONS SUBJECT TO VERIFICATION
[MFR]BUTLER
[Model]LE4000/VC1
[Year]1993
[Location]Wisconsin
[Price]
FLOOR TYPE FANUC 18M CONTROL SERIAL NUMBER:28437 SPINDLE TAPER:CAT. 50 RAM TRAVEL:41.3 (1050 MM) HEADSTOCK VERTICAL TRAVEL (Y):98" (2.5 METERS) COLUMN TRAVEL (X):354" (9 METERS) HORSEPOWER:40 RPM RANGE (4 RANGES):1-2100 RPM FEEDS INF. VARY:(.2-100 IPM) RAPID TRAVERSE RATE:360 IPM TOOLCHANGER SIZE:60 TOOLS
[MFR]BUTLER
[Model]LE4000/VC1
[Year]1993
[Location]Wisconsin
[Price]
FLOOR TYPE FANUC 18M CONTROL SERIAL NUMBER:28438 SPINDLE TAPER:CAT. 50 RAM TRAVEL:41.3 (1050 MM) HEADSTOCK VERTICAL TRAVEL (Y):98" (2.5 METERS) COLUMN TRAVEL (X):354" (9 METERS) HORSEPOWER:40 RPM RANGE (4 RANGES):1-2100 RPM FEEDS INF. VARY:(.2-100 IPM) RAPID TRAVERSE RATE:360 IPM TOOLCHANGER SIZE:60 TOOLS
[MFR]SENECA FALLS
[Model]EW100-40
[Year]1995
[Location]Wisconsin
[Price]
SWING OVER BED WAYS......... 27.5" (699 MM) MAX. GRIPPING DIAMETER...... 12" (305 MM) GRIPPING DIAMETER WITH PRESENT JAWS................ 1/2" - 6" (13 MM- 152 MM) MIN. GRIPPING DIAMETER...... 1" MAXIMUM PART LENGTH......... 40" (1016 MM) MIN. PART LENGTH............ 5.5" MAIN SPINDLE DRIVE MOTORS 20 hp ac with vary speed HEADSTOCK CROSS TRAVEL...... 24" (610 MM) TRAVERSE RATE............... 0-400 IPM INF. VARIABLE DRILL/MILL SPINDLE NOSE..... 50 ANSI DRILL SPINDLE SPEEDS........ 0-2000 RPM INF. VARIABLE DRILL SPINDLE STROKE........ 12" (305MM) MILL SPINDLE SPEED.......... 0-670 RPM INF. VARIABLE MILLING CUTTER DIAMETER..... 14" MAX. (356 MM) MILLING PASSES.............. INFINITE CONTROL TYPE................ FANUC 16TT APPROXIMATE WEIGHT.......... 25,000 LBS (11,400 KG) EQUIPPED WITH: FEEDS MOVEMENTS SPEEDS AND ALL OPERATIONS DONE BY CNC CONTROL (NO CHANGE GEARS REQUIRED) VARIOUS MANUALS MILL/DRILL/TAP HEADS ON EACH SIDE COOLANT SYSTEM HYDRAULIC SYSTEM SPARE PARTS CURRENTLY SETUP FOR UP TO 6.5" DIAMETER. MODIFICATIONS OF THE VISES WOULD NEED TO BE DONE TO HANDLE LARGER DIAMETERS.
[MFR]GIDDINGS & LEWIS
[Model]180 VTC
[Year]2000
[Location]Wisconsin
[Price]
TABLE DIAMETER........................... 138" MAXIMUM SWING............................ 180" MAXIMUM HEIGHT UNDER CROSS RAIL.......... 93.25" RAM VERTICAL TRAVEL...................... 74.8" RAM CROSS SECTION........................ 10.62" X 10.62" RAM TRAVEL LEFT OF CENTER................ 103" RAM TRAVEL RIGHT OF CENTER............... 104" RAIL VERTICAL TRAVEL..................... 52" TABLE SPEEDS............................. 2.5-126 RPM TABLE DRIVE MOTOR........................ 73.5 HP POWER SUPPLY............................. 460 VOLT 3-PHASE RAM TAPER................................ #60 ANSII RAPID TRAVERSE RATE X & Y AXES.......... 400 IPM FEED RATES VARIABLE X & Y AXES.......... 0.01-400 IPM EQUIPPED WITH: GIDDINGS & LEWIS 8002L CNC CONTROLS 138" T-SLOTTED TABLE W/FACE PLATE JAWS HARDENED WAYS ON CROSS RAIL NUMERIPROBE PART & TOOL PROBE SOFTWARE ADJUSTABLE CROSS RAIL WITH POWER ELEVATION RAIL LEVELING DEVICE INDUCTOSYN SCALES BIJUR LUBRICATION SYSTEM FLOOD COOLANT 3HP HIGH VOLUME COOLANT THRU CENTER OF RAM WORK LIGHTS AIR/OIL HEAT EXCHANGER CHIP PAN & SHIELDS POWER OPERATED DOOR CHIP CONVEYOR
