- HOME
- Select Manufacturer
- HITACHI
HITACHI Product List
1 ~ 36 of 36 POST
[MFR]HITACHI
[Model]EX200LC-1
[Year]1987
S/N:145-33407 Isuzu Engine U/C 65% No Cracks No Welds
[MFR]HITACHI
[Model]EX 200
[Year]
[MFR]HITACHI
[Model]EX3600-5
[Year]2006
Hitachi EX3600-5 (with new engine) MTU Engine 16V 4000 E20R Year 2011 is brand new from Germany S/N: HCM18800E00000123
[MFR]HITACHI
[Model]OSPE-22M6ARN[NEW]
[Year]
Outdoor specification (indoor combined use) 22kw 440V specification Discharge pressure:0.7MPa 60Hz ※ Built-in dryer ※ No inverter
[MFR]HITACHI
[Model]10/5Ton
[Year]1996
10/5Ton Lifting height:10t/11.1m 5t/11.1m Wire:φ16/12.5 (Span:16.3m)
[MFR]HITACHI
[Model]PBD-3.7XA5
[Year]
[MFR]HITACHI
[Model]-
[Year]
[MFR]HITACHI
[Model]NU-DH4
[Year]
10mm 100V 400W 50/60Hz 4.2A 1250rpm ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.
[MFR]HITACHI
[Model]Luh7
[Year]
6.5mm 100V 50/60Hz 335w rated 30 minites 2200rpm ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.
[MFR]HITACHI
[Model]NU-DH
[Year]
10mm 100V 50/60Hz 1250rpm 170w ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.
[MFR]HITACHI
[Model]PD-180A
[Year]1988
180mm 100V 50/60Hz ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.
[MFR]HITACHI
[Model]1/4 S2
[Year]
Capacity:250kg Lift:3m Rating:30min Speed:(50Hz/60Hz)10m/min / 12m/min ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.
[MFR]HITACHI
[Model]1/4 S2
[Year]1986
Lift:3m Capacity:250kg Rating:30min Speed:(50Hz/60Hz)10m/min / 12m/min ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.
[MFR]HITACHI
[Model]-
[Year]
100mm*9*12.70 ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.
[MFR]HITACHI
[Model]
[Year]
[MFR]HITACHI
[Model]B23SE
[Year]
Swing:430mm Spindle feed amount:125min Spindle speed:400-2400 / 480-2880rpm(50/60Hz) ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.
[MFR]HITACHI
[Model]0.75P-9.5V6
[Year]2001
Maximum pressure:0.93MPa Cylinder diameter * stroke * number:φ50*65*1 Rotation speed:990min-1 Discharged air volume:80L/min Air tank capacity:38L
[MFR]HITACHI
[Model]500kg
[Year]2005
500kg Pendant (upper and lower) available
[MFR]HITACHI
[Model]NPO-5.53VNB
[Year]2018
5.5kw Nitrogen Gas Discharge Pressure:0.55MPa Nitrogen Gas Capacity:10.2m³/h never used
[MFR]HITACHI
[Model]PB-2.2MN5
[Year]
[MFR]HITACHI
[Model]OSP-37VARN
[Year]2009
37kw 3-phase 200V(50Hz)/200・220V(60Hz) 0.7MPa Air Volume: 6.6㎥/min Inverter・Built-in dryer Air dryer:Refrigerant gas filling (2022/12/1) Fully inspected (2022/12/1)
[MFR]HITACHI
[Model]4AⅡ
[Year]1972
Collet chuck (Manual feed) Round material diameter:38mm / (Manual feed) 45mm Scroll Chuck:Outer Diameter 220mm Power Chuck:Outer Diameter 220mm Spindle through hole diameter:57mm 80-2000rpm Swing on the bed:490mm Top width of bed:250mm ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.
[MFR]HITACHI
[Model]2MW-V
[Year]1983