- HOME
- Select Machine Name
- EDM (Electrical Discharge Machining)
- EDM, Wire-cut
Search Machinery
EDM, Wire-cut
1 ～ 18 of 18 POST
[MFR]FANUC
[Model]α-1C
[Year]1997
FANUC Series 16-w stroke:520*370*300mm UV axis stroke:±60*±60mm Wire diameter used:φ0.1～0.3 Wire tension:200-2500g Maximum wire mass:6kg Tank capacity:530L ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.
[MFR]FANUC
[Model]α-1iC
[Year]2006
F-180iS-WB Max work size：820*730*300 S: 550*370*310 U-±60 V-±60 Taper:±30°/80 Wire：φ0.1-0.3 Load：1000kg
[MFR]FANUC
[Model]α-C400iB
[Year]2019
FANUC 31i-WB Max work weight: 500 kg XYZ: 400x300x255 U/V: ±60 mm Linear encoder
[MFR]FANUC
[Model]α-C400iB
[Year]2018
F-31i-W-MB Max processing size:730*630*250 Max:500㎏ ST:X400Y300Z255UV±60
[MFR]MITSUBISHI ELECTRIC
[Model]FA20
[Year]2000
W21FA-1 Workpiece size:1050*800*295 S:X500Y350Z300
[MFR]MITSUBISHI ELECTRIC
[Model]FA20S
[Year]2005
◆Controller: W21FAS-2 ◆Maximum workpiece dimensions (W * D * H): 1050 * 800 * 295 mm ◆Maximum workpiece weight: 1500 kg ◆Table dimensions: 780 * 630 mm ◆Axis travel (X * Y * Z): 500 * 350 * 300 mm ◆Table rapid feed speed: 1300 mm/min ◆Wire electrode diameter: 0.1 to 0.3 mm ◆Tapering device: Standard device ◆Axis travel (U * V): ±75 * ±75 mm ◆Maximum taper angle: 15° (for a plate thickness of 260 mm) (Note: This appears to be an error and should be omitted.) ◆Machine dimensions (W * D * H): 2013 * 2632 * 2100 mm ◆Weight: 3500 kg ◆Cutting fluid tank capacity: 740 L ◆Cutting fluid tank dimensions(W * D * H): 880 * 2085 * 1490 mm ◆Power supply unit (WFAS) ◆Power supply circuit: Transistor pulse circuit (stabilization circuit, AVR built-in) ◆Power supply dimensions (W * D * H): 550 * 600 * 1650 mm ✤In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.
[MFR]MITSUBISHI ELECTRIC
[Model]FA40VM
[Year]2007
Max workpiece dimensions: 1550 x 1300 x 395 S: X1000 Y800 Z400 Table: 1360 x 1175
[MFR]MITSUBISHI ELECTRIC
[Model]QA10
[Year]2000
X Axis 350 mm Y Axis 250 mm Z Axis 220 mm Max. workpiece length 800 mm Max. workpiece width 575 mm Max. workpiece height 215 mm Max. workpiece weight 800 kg CNC Type W21QA Worktank length 630 mm Worktank width 530 mm Worktank height 1550 mm Automatic Wire Feeding ------------------- Length x width x height 1718.0 × 2385.0 × 1920.0 Weight 2500 kg
[MFR]SODICK
[Model]AG360L
[Year]2013
Control unit : LN1W (SI-LINK) Maximum workpiece dimensions : 550 × 380 × 220 mm (jet machining) 550 × 380 × 170 mm (immersion machining) Maximum workpiece mass : 400 kg (jet machining) 300 kg (immersion machining) Machining tank internal dimensions : 894 × 720 mm Travel X : 360 Y : 250 Z : 220 mm U × V : 80 × 80 mm Taper machining control angle (at 80 mm thickness) : ±20° Wire electrode diameter : φ0.15–φ0.3 mm Wire feed speed : 420 mm/sec Wire bobbin mass : 8 kg Electrical capacity : 3-phase 50/60Hz 13 kVA Required floor space : 1,785 × 2,260 mm Height : 2,065 mm Machine weight : 2,700 kg Maximum discharge current: 40 A Service tank unit dimensions : 800 × 2,080 × 1,895 mm Machining fluid capacity : 590 liters Mass (dry) (including power supply) : 585 kg Machining fluid filtration method : Paper filter replacement type (internal pressure, dual‑cylinder type) Eco Ion : Ion‑exchange resin (18‑liter specification)
[MFR]SODICK
[Model]FS-800
[Year]1991
MARK-21(updated) S:500*800*320(quill) Jet type Max workpiece size:1000*600*300 Max workpiece weight:1000kg Wire feeding speed:250mm/sec
