MSC-802M BT30 S:550*400+20*300 T:700*400 8000rpm ATC12 ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

◆Controller: FANUC-16i-MB ◆Table dimensions (working area): 1,400 * 610mm ◆Table load capacity: 1,500 kg ◆Left-right (X-axis) travel distance: 1,100mm ◆Front-back (Y-axis) travel distance: 610 mm ◆Up-down (Z-axis) travel distance: 560 mm ◆Spindle end to table top: 200 to 760 mm ◆Spindle center to column front: 650 mm ◆Rapid traverse rate: 20,000 ( X, Y) 16,000 (Z) mm/min ◆Cutting Feed Rate: F4 digit 0.1 to 5,000, F1 digit 10 to 2,000 mm/min ◆Spindle Bore Taper: No. 50 ◆Spindle Speed ​​(S4 digit direct specification): 20 to 4,000min-1 ◆Gear Shift: Automatic, 2-speed ◆Spindle Motor: VAC 11/15 kW ◆Feed Motor (X*Y*Z): 4*4*4 kW ◆Hydraulic Unit Motor: 2.2 kW ◆Hydraulic Unit Knit tank capacity: 10 liters ◆Spindle cooling oil circulation pump motor: 200W ◆Spindle cooling oil tank capacity: 15 liters ◆Slideway lubrication motor: 17W ◆Slideway lubrication tank capacity: 6 liters ◆Cutting oil pump motor: 180W ◆Cutting oil tank capacity: 300 liters ◆Floor to table top: 900 mm ◆Total machine height: 2,785 mm ◆Required floor space (side to side): 3,350 * 3,385mm ◆ Machine Weight: 8,800 (9,300) kg ◆Maximum Power Consumption: 39 kVA ◆Tool Shank: MAS403-BT50 ◆Tool Pull Stud: MAS407-P50T-II ◆Tool Selection Method: Random Memory ◆Maximum Tool Diameter (with adjacent tools): Φ120 mm ◆Maximum Tool Diameter (without adjacent tools): Φ150 mm ◆Maximum Tool Length: 400 mm ◆Maximum Tool Weight: 20 kg ◆Number of Tools in Magazine: 20 ◆Tool Change Time (TOOL to TOOL): 2.5 seconds ◆Tool Change Time (CHIP to CHIP): 7 seconds ◆Magazine Rotation Drive Motor: 800 W ◆ATC Arm Drive Motor: 750 W ✤In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

OSP-P200M-H for 3D-D MC S:762*460*460 A axis:20 to -110 degrees C-axis:360 degrees Rapid traverse speed (mold specifications): XYZ 20m/min (mold) Rapid traverse speed:A-axis 14400 degrees/min Rapid traverse speed:C-axis 18000 degrees/min Cutting feed rate (mold specifications): XYZ 20m/min (mold) 50～20000min-1 HSK-A63 Table:φ400 ATC:48 ※Through-spindle coolant ※Spindle thermal displacement control TAS-S ※Environmental thermal displacement control　TAS-C ※Absolute scale detection (mold) XYZ axes ※Automatic tool length compensation ※High class (simultaneous 5-axis control device) H specification ※DNC coupling DNC-DT ※Super-NURBS function Type-A (XYZAC) ※Fixture offset ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

◆Control device: OSP-P300MA-H ◆X-axis: 762mm ◆Y-axis: 460mm ◆Z-axis: 460mm ◆A-axis: 20 to -110 degrees ◆C-axis: 360 degrees ◆High-speed spindle specifications: 50 to 15,000 min-1 ◆ATC tool storage capacity: 32 tools ◆Spindle end face restraint (Spindle BIG Plus) ◆In-machine chip conveyor (coil type) ◆Lift chip conveyor (floor type/drum filter type) ◆Shower cleaning device (including nozzle assembly tool) ◆Automatic origin correction/automatic measurement ◆Automatic opening/closing front cover ✤In case of discrepancies between specifications and the actual product, the actual product will take precedence.

S:X350*Y550*Z510 A: -120°~+30° C: ±360° T:Φ500*400 Table loading capacity: 300Kg Maximum workpiece size: Φ500mm/H350mm Main shaft taper hole: 7/24 taper No.40 Rpm: 12000 Main shaft bearing inner diameter: 80mm ATC: 30 pieces 【special version】 ・Preparation for installing hydraulic jig 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating ・Front door automatic opening/closing (with area sensor) ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

Maximum workpiece dimensions: Diameter Φ500mm/Height 350mm Travel amount (XYZ): 350*550*510 A-axis travel amount (table tilt/0.0001 degree index): -120°~+30° C-axis travel amount (table rotation)/0.0001 degree index): ±360° Distance from spindle end to table top (table horizontal): 50 to 560 mm Distance from spindle end face to table center (table perpendicular): 40~550mm Table loading load (equal distribution): 300Kg Main shaft taper hole: 7/24 taper No.40 Spindle rotation speed: 35~12000min-1 Main shaft bearing inner diameter: 80mm Table dimensions: Φ500*400mm width Number of tools stored: 30 【special version】 ・Preparation for installing hydraulic jig 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating ・Front door automatic opening/closing (with area sensor) ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

FANUC0iMD XYZUV:700*300*600*70*20 Two spindles (VF axis, BT axis) (VF axis) 3000min-1/(BT axis) 10000min-1 BT40 Spindle bearing inner diameter:(VF axis) 80mm/(BT axis) 70mm ATC20 ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

OH-OSP-HMC Table:800*410 Maximum load capacity:350kg S:580*410*400 Spindle taper:No.40 60～4000rpm Power capacity:12KVA ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

◆Control device: FANUC Series 15-M ◆Movement amount XYZW: 2000×760×850×1030 ◆Distance from table top to vertical spindle end: 150 to 1000 ◆Distance from the front of the column to the center line of the vertical spindle: 700 ◆Distance from table top to horizontal spindle center line: 20 to 1050 ◆Table work surface size: 2500 x 655 ◆Maximum loading mass of table: 3000 ◆Table top shape: 22mm T-groove 5 pieces ◆T-slot spacing: 125 ◆Spindle rotation speed: 20 to 4000min-1 ◆Spindle taper hole: 7/24 taper NO.50 ◆Spindle bearing inner diameter: 100 ◆ATC: 32 ◆Rapid feed speed XY: 10000mm/min ◆Rapid feed speed ZW: 10000mm/min ◆Cutting feed rate XYZW: 1 to 3600mm/min ◆Spindle motor: AC1kW/30 minutes Model 12 ◆Feed shaft electric motor XY: AC3.3kW ◆Feed shaft electric motor ZW: AC3.5kW ◆Hydraulic electric motor: 2.2kW ◆Hydraulic unit tank capacity: 40L ◆Machine dimensions: W6670×D4250×H3520 ◆Machine weight (including NC device): 21300kg ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

◆Control device: FANUC 18i-TA ◆Grinding hole diameter (mm): Φ6～150 ◆Grinding stroke (mm): 125 ◆Swing within chuck cover (mm): Φ260 ◆Swing on table (mm): Φ600 ◆Maximum travel of grinding wheel spindle feed (X-axis) (mm): 170 ◆Grinding wheel spindle feed (X-axis) grinding feed rate (mm/min): 0.001～10000 ◆Grinding wheel spindle feed (X-axis) rapid traverse speed (mm/ min): 10000 ◆Table left/right feed (Z axis) maximum travel distance (mm): 500 ◆Table left/right feed (Z axis) grinding feed rate (mm/min): 0.001 to 10000 ◆Table left/right feed (Z axis) rapid traverse speed (mm/min): 10000 ◆Minimum setting unit (X axis) (mm): Φ0.0001 ◆Minimum setting unit (Z axis) (mm): 0.0001 ◆Working spindle rotation speed (min-1): 100 to 850 ◆Work Spindle swivel angle (deg.): -5 to 15 ◆Grinding wheel rotation speed (standard attachment) (min-1): 20000 ◆Grinding wheel rotation speed (special attachment) (min-1): 10000 to 50000 ◆Motor (for spindle) (kW/P): 1.5/4 (with inverter) ◆Motor (for grinding wheel spindle) (kW/P): 2.2/2 ◆Motor (for X-axis) (W): 750 (AC servo motor) ◆Motor (for Z-axis) (W): 900 (AC servo motor) (Bomotor) ◆Distance from frame bottom to chuck center (mm): 1000 ◆NC device (number of control axes): Grinding wheel axis feed X-axis, table left/right feed Z-axis, simultaneous 2-axis control ◆Occupied volume (width * depth * height) (mm): 2535 * 1990 * 1640 ◆Body weight (kg): 2300 ◆Required power (including optional water supply device) (kVA): 8 ◆Included: Grinding wheel spindles 10000rpm, 15000rpm, 20000rpm, 30000rpm (4 pieces) ✤In case of discrepancies between specifications and the actual product, the actual product will take precedence.