◆Spindle motor capacity, output: 4kw ◆Spindle motor speed, 60Hz: 1740r/min ◆Frame dimensions: W630×D600×H535 ◆Opening capacity: 50mm ◆Arm length: 1600mm ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

◆Column diameter: 550 ◆Maximum distance between side of column and spindle: 2000 ◆Maximum distance between center of column and spindle: 2400 ◆Spindle left/right movement distance: 1660 ◆Maximum/minimum distance between spindle end and base surface: 1890-610 ◆Arm up/down movement distance: 880 ◆Speed ​​range 50C/S: 14-1800 60C/S: 18-2240 ◆Spindle diameter: 90/85 ◆Tapered hole: M.T.No.5 ◆Number of automatic feed conversions: 18 ◆Automatic feed range: 0.025-1.25 ◆Up/down movement distance: 400 ◆Working area: 2145*1140 ◆Auxiliary table dimensions: 500*750*600 ◆Main motor: 5.5 ◆Lifting motor: 2.2 ◆Clamping motor: 0.4 ◆Coolant pump motor: 0.2 ◆Required floor space: 3600*1320 ✤If there is a difference between the specifications and the actual product, the actual product will take precedence.

S150mm ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

Table:450×800 Table movement (back and forth): 240 Minimum workpiece height:200 Minimum inner diameter of workpiece:8 Processing key width:3 to 25 Piston stroke:110 ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

【❖Take a look at our video!❖】 Ram maximum stroke:205 Ram maximum tilt angle:10 ° Table diameter:427mm Table:435*600 Distance from the front of the bite to the support:410mm Main motor:1.5kw*6P ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

Link motion press Stroke number:40-75spm Stroke length:180mm Slide adjustment amount:70mm Slide bottom dimension 500x600mm Bolster dimensions:920x980mm DH:315mm Main motor:5.5KW Working air pressure:5.0 kgf/cm2 Sudden stop time:170ms ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

◆Pressure Capacity: 110T ◆Stroke Rate: 60 SPM ◆Stroke Length: 150 mm ◆Die Height: 365 mm ◆Slide Adjustment: 100 mm ◆Slide Bottom Dimensions (L/R * F/A): 600 * 500 mm ◆Bolster Dimensions (L/R * F/A): 1100 * 700 mm ◆Emergency Stop Time: 200 ms ◆Overrun Monitoring Device Setting Position: 15° ◆Power Supply: 200V 3-Phase 60 Hz ◆Main Motor: 7.5 kW ◆Air Pressure: 5.7 kg/cm2 ✤In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

Pressurization capacity:650T T:1000*1000 DL:1000mm Stroke:800mm Motor:11kw*4P Tank capacity:700L Mold heater ~ 600 degrees maximum heating temperature ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.

[High speed type] ◆Pressure capacity: 29.4kN ◆Stroke length: 30-150mm ◆Ram descending speed: 318mm/sec ◆Ram rising speed: 274.0mm/sec ◆Working pressure range: 35.4 to 106 ◆Open height: 280mm ◆Bolster: 350＊240＊30mm ◆Shank hole: φ20＊40 ◆Motor output: 0.75kw ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.

NS2-3000(2NL) type Stroke 300mm Stroke number 15~30spm Die height 650mm Slide adjustment amount 130mm Slide dimensions 2400x900 Bolster dimensions 2600x1200 Transfer device Feed stroke 0~600mm Clamp stroke 0~225mm Lift stroke 0~60mm Minimum internal width when clamping 450mm Maximum internal width when unclamped 900mm ✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product.