- HOME
- Select Manufacturer
- GLEASON
GLEASON Product List
1 ~ 8 of 8 POST
[MFR]GLEASON
[Model]116
[Year]
Max. cone distance (30 degree angle and 300 mm cutter): 228 m Max. extreme ratio: 10 to 1 Max. gear pitch diameter (30 degree spiral angle): -Ratio 10 to 1: 457 mm -Ratio 2 to 1: 406 mm -Ratio 1 to 1: 323 mm Diametral pitch (coarsest): 12,7 mod. Max. full depth: 25,4 mm Max. face width: 69,9 mm Number of teeth: 5 to 150 WORK SPINDLE Diameter of taper hole at large end: 100 mm Taper per foot: 39/1600 mm Depth of taper: 150 mm Diameter of spindle nose: 137,5 mm
[MFR]GLEASON
[Model]NO.12
[Year]
Max dia gear 24"、 Max pitch dia 18"、 Max face width 3 and 1 in 2"、 Longest cone distance 3.5"、 Face 12"、 Extreme ratio 10:1 Largest pitch 3DP、 Max Pitch angle 90°、 Weight:4.5TON
[MFR]GLEASON
[Model]NO.503
[Year]
Maximum gear diameter 266mm、 Maximum pinion diameter 152mm、 Offset of gear spindle above or below center of pinion spindle 95mm、 Pinion spindle Diameter of taper hole at large and 100mm、 Main moter 5HP/1800rpm、 Taper per foot 13mm、 Floor space1800mm×16200mm、 Net weight 4195kg
[MFR]GLEASON
[Model]NO.605(NC-TYPE)
[Year]
FANUC Power Mate、Pitch diameter (Maximum) 10 to 1 ratio 10 1/2 (266mm )、 21;2 to 1 ratio (10 mod. )、Face width (Maximum) 1 5/8"(41mm)、Full depth (Maximum)750"(19mm )、 Main motor 50 cycle 1500RPM、Net weight 6123KGvv
[MFR]GLEASON
[Model]NO.606
[Year]
Pitch diameter (Maximum) 10 to 1 ratio 10 1/2 (266mm )、21;2 to 1 ratio (10 mod. )、 Face width (Maximum) 1 5/8"(41mm)、Full depth (Maximum)750"(19mm )、 Main motor 50 cycle 1500RPM、Net weight 6123KGvv
[MFR]GLEASON
[Model]No.102(5 in stock)
[Year]
Max dia 117(spiral)、 Max dia 95(Hypoid)、 Max module1.6、 Face width(maximum)11mm、 Workhead angle -12°~90°、 Number of teeth 5~200mm、 Main motor 3/4HP×1800rpm(60cycle)、 machine weight 1757KG
[MFR]GLEASON
[Model]NO.463
[Year]
MAX DIA (34")、 861mm、 2DP (MODULE 12)、 Cone distance(maximum30° Spiral angle and 12" diameter wheel 381mm、 depth of taper 6"、 feed(sec/tooth) 1.9to11.8s econds、 feed motor 1500rpm
[MFR]GLEASON
[Model]NO.116
[Year]
NO.116 Max. cone distance 30° spiral angle & 12" cutter 228.6、 Extreme ratio 10:1、 Max. gear pitch diameter (30° spiral angle )、 10:1 ratio460、2:1 ratio406、1:1 ratio323、 Coarsest diametral pitch12.7(DP2)、 Max. full deep25.4mm、 Max. face width69.9mm、 Number of teeth5~150、Cutter speeds17~115rpm、 Feed (seconds per tooth)9~80sec/tooth