◆Material Diameter: 51-type specifications: Φ8～Φ45mm (Φ51) H10～H38mm ◆Material Capacity: Φ10→30 pieces, Φ45→7 pieces, Φ51→6 pieces ◆Material Length: 4.0m ◆Remaining Material Disposal: Rearward extraction (remaining material length 70mm～500mm) ◆Feeding Speed: Forward maximum 350mm/sec, Reverse maximum 700mm/sec ◆Feeding Output: MAX 400N (40.8kgf) ◆Power Supply: AC200V 3PH 50/60Hz・2.0KVA ◆Air Source: 0.5～0.7Mpa (5～7kgf/cm²) ◆Oil Used: 4.0m → 65ℓ ◆Equipment Weight: 4.0m → 1,200kg ◆Body Length: 4,860 ◆Material Shelf Length: 4,030 ◆Leg Center Distance: 3,500 ◆Feed pipes are available in 42, 45, and 51 types as standard specifications; others are prepared to match the NC automatic lathe to which it is installed. ◆If the material diameter is larger than the maximum inner diameter of the finger chuck, please machine a step at the rear end of the material. ◆Setup replacement parts, options, and special specifications are handled separately. ◆Use the rotation speed according to the bending accuracy of the material. ✤In case of discrepancies between specifications and the actual product, the actual product will take precedence.

◆Material Diameter: (Φ8) Φ14～Φ65mm ◆Material Length: 200～1300mm ◆Rod Capacity: 15 rods of Φ20 ◆Waste Disposal Method: Front Discharge ◆Power Supply: 0.9kVA ◆Power Supply Voltage: 1P AC200～220V ◆Power Supply Frequency: 50/60Hz ◆Air Pressure: 0.5～0.6MPa ◆Air Flow Rate: 20L/min ✤In case of discrepancies between specifications and the actual product, the actual product will take precedence.