- HOME
- Select Machine Name
- Rolling Mill Equipment
Search Machinery
Rolling Mill Equipment
1 ～ 12 of 12 POST
[MFR]BLAW KNOX
[Model]
[Year]
Manufacturer: Blaw Knox Revamp: Clecim (1995) Configuration: 22.5”x 53 x 48”4Hi 5 Stand TCM Stand 1 Power: 1500 HP Stand 2 & 3 Power: 1750 HP Stand 4 & 5 Power: 2413 HP Main Sensors: 3 X Ray Gages Flat meter roll HGC: Long Stroke Cylinders in all Stands Work Roll Bending: Positive and Negative WRB available just in Stands 4 and 5 Actuators for Flatness Control: WRB and multizone WR coolant Stand 5 Strip width range: 600 - 1060mm Strip thickness range: 0.17 – 1.9mm Maximum Speed: 790 m/min Coil weight: Max 18.8 MT Capacity: 320.000 MT per year Crew: 6 Operators + 1 Crane Operator
[MFR]DAVY
[Model]
[Year]
Consists of: Single Slab Reheat Furnace • Type: Walking Beam • Manufacturer: Davy • Capacity: 150 t/h • Inside Refractory Width: 8,35 m • Effective Length: 32,6 m • Slab Thickness: 160 mm • Slab Maximum Length: 7,5 m • Primary Fuel: mixed BFG and COG • Alternate Fuel: N°6 Fuel Oil • Commissioned in 1995 Water Descalers • Primary descaler at slab reheat furnace run out table • Front and back 3 Hi Rougher Mill descalers. • Finishing Mill descaler at run-in table. Water Descaling Pumps • Manufacturer: Union Pump Company • N° of Pumps: Two (one operating, one stand by.) • Power: 5.000 HP (3.730 kW) • Pump Speed: 4.500 rpm • Discharge Pressure: 127 barg (1.840 psig) Rougher Mill • Type: 3 Hi, one stand 22" x 34" x 100" Reversing Mill • Manufactured by Blow-Knox in 1923. • Main Motor : Synchronous type • Main Motor Power: 6000 HP • Motor Speed: 250 rpm • Maximum Rolling Force: 700 t • Maximum Edger Force: 100 t • Edger Motor Power: 300 HP (224 kW) • Transfer Bar Speed: 2,9 m/s Crop Shear • Drum Type Rotary Crop Shear • Manufacturer: United • Maximum Transfer Bar Section: 32 x 1575 mm at 940 °C, 0,4%C Carbon Steel • Maximum Transfer Bar Speed: 2.5 m/s Finishing Mill • Type: 4 Hi 6 Stands • Mechanical Manufacturer: United • Electrical Manufacturer: General Electric • Roll Barrel: 1.727 mm (68”) • Work Rolls Diameter: 699 mm (27,5”) • Back-Up Roll Diameter: 1.380 mm (54”) • Maximum Rolling Force Stands 1 to 4: 2.400 t • Maximum Rolling Force Stand 5: 2.000 t • Maximum Rolling Force Stand 6: 1.600 t • Electromechanical Screw down Stands 1 to 4 • Electromechanical Screw down & hydraulic capsules in Stands 5 & 6. • 40 t per chock work roll bending per stand. • Main Drives Stands 1 and 2: 6.000 HP (4.476 kW) • Main Drives Stands 3 to 5: 5.000 HP (3.730 kW) • Main Drive Stan 6: 4.000 HP (2.984 kW) • All main drives are DC with thyristor speed control. • Maximum Finishing Speed: 830 m/min • Two X-Ray Gages • Commissioned in 1970 (Stands 3 to 6) and revamped in 1995 (Adding Stands 1 & 2) Laminar Cooling • Seven Cooling Sections • Three Control Zones • Total Water Flow: 5.270 m³/h • Upper Face Cooling: 4.100 m³/h • Bottom Face Cooling: 1.170 m³/h • Water Pressure: 2,5 barg Single Downcoiler • Two Wrapper Rolls pneumatically activated. • Maximum Coil Width: 1.575 mm (62”) • Maximum Coil Weight: 20 t • Maximum Coil Diameter: 1.727 mm (68”) • Mandrel Diameter: 724 mm (28.5“) • Strip Thickness: 1,8 to 12,7 mm
[MFR]KG TEC
[Model]
[Year]1995
KG TEC(JAPAN) 0.2 ~ 1.2t × 50 ~ 500w × 3.5(2.0)ton Mini Slitting Line （１） Material & Slitter Line Specification ① Materials ： CR, Stainless Steel ② Thickness ： 0.2 ～ 1.2 mm ③ Width ： 50 ～ 500 mm ④ Coil ID ： φ508 mm ⑤ Coil OD ： φ1450 mm (MAX) ⑥ Coil Weight ： 3,500 kg ⑦ Tensile strength ： 450 N/㎟ ⑧ Yield Force ： 320 N/㎟ ⑨ Pass Line Height ： FL＋1050 mm （２）Slitting Conditions ① Slitting Methods ： Drive Method ② Line Speed ： 70 m/min (MAX) ③ Shaft Diameter ： Φ110 mm ④ Slitter Knife Outer Diameter： Φ210 mm ⑤ Slitting Width ： 9 mm (MIN) ⑥ Slitting Stripes ： 15 Stripes (MAX) （３）Output Conditions ① Coil ID ： φ250, φ300, φ508 mm ② Coil OD ： φ1300 mm (MAX) ③ Coil Weight ： 2,000 kg (MAX)
[MFR]OKADA GIKEN
[Model]
[Year]
Thickness: 0.3～ 1.2 (2)mm, CR, Surface Treated Coil, Width: 100 ~ 750 mm, Coil Weight : 5,000kg（MAX, Product Length: 300 ~ 3,000mm, Line Speed: 80M/min, Line Directtion: 「Right」→「Left, Manufacturer(Machinery: Okada Giken 1991) (Electric manufacturer: Reliance 2011),
[MFR]SANNO TEKKO
[Model]6Hi Leveler
[Year]2015
Sanno MFG. CO., LTD. (Japan) 6Hi Leveler Roll Dia. φ90×1730mm長 (13 pcs) Screw down Motor Work Roll(material) SUJ-2 Quenching and Polishing Pinch Roll φ247×1700長 2 pcs Middle Roll φ50×1730mm長 (15 pcs) Backup Roll 5-row φ135×66mm Motor ACV-165KW 1500RPM with Brake
[MFR]SKET
[Model]UBR 25x3150-7/16
[Year]1980
Max width of sheet: 3200 mm Useful length of roll: 3400 mm Max thickness of metal sheet: 24-30 mm Max thickness of metal sheet by max length: 25 mm Min thickness of metal sheet by max length: 8 mm Max resistance by max size of metal sheet: 34 kP/mm2 Diameter of rolls: 270 mm Diameter of outgoing rolls: 320 mm 7 leveling rollers Leveling speed: 16 m/min 18 backup rolls Diameter of backup rolls: 268 mm Main drive: 85 kW Rotational speed: 990U/min Machine weight: 61250 kg
[MFR]SMS
[Model]3-13-2000
[Year]1990
YOM: 1990 Model: 3-13-2000 Max Strip width: 2030 mm Max Thickness: 13 mm 11 Rolls diam.: 125/115 mm; 154 Back-Up Rolls diam: 130 mm Max opening (gap): 100 mm Speed: 30/45 M/Min; Leveling Pressure: 6.500 kN; Main drive: 0-199kW
[MFR]SONORUKA
[Model]SSS-16150
[Year]1996
material thickness 0.5~1.6tmm material width 500~1500L coil weight 7.5ton line direction R→L pass line from FL 1500mm
[MFR]VEB BLEMA GOTHA
[Model]UBR 9x2500/1-16
[Year]
Max. sheet width: 2500 mm Max. sheet thickness: 9 mm Min. sheet thickness: 6 mm Number of straightening rolls: 16 Straightening speed: 16 m/min Total power requirement: 30 kW
[MFR]WMW
[Model]UBR 10x2000/1-16
[Year]1991
Max sheet width: 2000 mm Sheet thickness: -Max: 10 mm -Min: 4 mm Straightening rolls: -Quantity: 13 units -Diameter: 140 mm Throughput speed: 16 m/min Center distance between rolls: 150 mm Main motor power: 30 kW Overall dimension: -Length: 5350 mm -Width: 2900 mm -Height: 2500 mm Total weight: 32 ton Machine wasn't used. Missed parts: main motor 2 top small motors control panel and electrical cabinet.
[MFR]
[Model]
[Year]
2-stages rolling mill Roll Dia:φ65, Roll Wide:90W Motor:1.5Kw Change Speed
