- HOME
- Select Machine Name
- Bending Rolls
- Bending Roll, 4 Rolls
Search Machinery
Bending Roll, 4 Rolls
1 ～ 6 of 6 POST
[MFR]HAEUSLER AG
[Model]EVO 42196
[Year]2024
Year: 2024 Model: EVO 42196 Surface lengths of rolls: 4,200mm Pre-bending capacity at 5 x top roll diameter and yield point 260 N/mm2: 34mm Rounding capacity at 5 x top roll diameter and yield point 260 N/mm2: 38mm Top roll dia.: 540mm Bottom roll dia.: 500mm Side rolls dia.: 365mm Smallest possible bending diameter with top roll Ø540mm: 595mm (depending on springback) Smallest possible bending diameter with interchangeable top roll Ø370mm: 410mm (depending on springback) Number of rolls: 4 Bearing of rolls: Self-aligning roller bearings Max. cylinder force against top roll: 3,245kN Material of rolls: 42CrMo4 (1.7225) Driven rolls in standard execution: 1 (Top roll) Driven rolls (optional): 2 (Top and bottom roll) Roll drive: E-motor with planetary gear box (Efficiency > 90%) Operating speed: 0-8 m/min, stepless adjustable Speed compensation between top and bottom roll: automatic, if the option two rolls drive is selected Adjustment of rolls: hydraulic Tilting of bottom and both side rolls for cone bending: Stepless from mobile control panel Installed electrical power (with all possible optional items): 55kW Power supply (in standard execution): 400V/60Hz/3 Phases Ambient temperature (in advanced execution): 0 ﾟC- 45 ﾟC Overall dimension (LXWXH) approx.. (without optional items): 7,460x2,060x2,390mm Total weight (without optional items): 35,060kg
[MFR]HAEUSLER AG
[Model]VRM-HY 4000 x 35/30
[Year]2011
HYDRAULIC 4-ROLL PLATE BENDING MACHINE Year: 2011 (Retrofitted in Year 2022) Model: VRM-HY 4000 x 35/30 Max. width of plate: 4,000mm Thickness of plate at max. yield point of 240N/mm2 For edge setting at max. width of plate: 30mm at bending-Ø1,250mm at rounding: 35mm at bending- Ø1,250mm Prebending length at s= 30mm X=3xs Roll diameter-top and bottom roll: 570/540mm Roll diameter-side rolls: 450mm Smallest bending diameter: 650mm Number of rolls: 4 Roll material: 61 MnCrMo 43Driven rolls: 2 Top-and bottom roll Drive: over 2 hydro motors direct flanged Working speed: 4 m/min Adjustment speed bottom roll: 0-200 mm/min Adjustment speed side rolls: 0-700 mm/min Speed compensation between top-and bottom roll: automatic Power: 60kW Operation of the tilting bearing: hydraulic Tilting of the top roll: hydraulic Bearing block: hydraulic Working voltage: 380V/50Hz/3Ph Indicator device of roll position: digital Weight of machine: approx.: 52tons
[MFR]ISEL
[Model]BS-BH3000×12t
[Year]1999
working width:3,000mm Rolling:12mm Top Roll: dia400mm Lower Roll: dia240mm Side Rolls: dia250mm
[MFR]PIESOK
[Model]XZMP 16*3150 mm
[Year]
sheet width: 2000 mm max. the wrapping sheet thickness: 12 mm number of rolls: 3 max. pre-bent sheet thickness: 18 mm engine power: 22 kW machine dimensions: 5300 x 1600 x 1850 mm machine weight: 15800 kg
[MFR]RYAZAN
[Model]IB 2424A
[Year]
25MMX3150MM 4 rolls (four cones) bending and forming machine Model Ryazan IB 2424th Power line 380 V The greatest thickness of a sheet at 250 mega Pascal effort: At bending 28 mm 25 mm Width At overcast of a sheet (max.) The least 2500 mm bending radius 760 mm Length of the machine about 7460mm Width 2960mm Total weight of the machine ca .. 54200 kg
[MFR]RYAZAN
[Model]IV2424
[Year]1988
Max. plate thickness: -At bending: 25 mm -At prebending: 20 mm Max. plate width: 3150 mm Min. bending radius: 380 mm Bending speed: 7500 mm/min Upper roll diameter: no more than 500 mm Total power: 25 kW Main drive motor power: 37 kW Voltage: 380 V; 50 Hz Dimensions: -Left-to-right: 7500 mm -Front-to-back: 4830 mm -Height: 3655 mm Machine heigth above floor level: 2500 mm Weight: 44500 kg
