- HOME
- Select Machine Name
- Gap Frame Presses
Search Machinery
Gap Frame Presses
[MFR]KOMATSU
[Model]OBS80-3
[Year]1994
BRAND : KOMATSU Model : OBS80-3 Specifications Capacity : 80TON Year : 1994 Made in : JAPAN Location : INDONESIA Qty : 3 UNITS
[MFR]KOMATSU
[Model]OBS80-3
[Year]1993
BRAND : KOMATSU Model : OBS80-3 Specifications Capacity : 80TON Year : 1993 Made in : JAPAN Location : INDONESIA Qty : 1 UNIT
[MFR]DENISON
[Model]35LA
[Year]
FORCE TONNAGE 35 TON BED SIZE 28" x 19" STROKE 15" DAYLIGHT OPENING 24" BETWEEN RAM & BED MAIN MOTOR 30 HP RAM & PISTON DIAMETER 3.25" & 4.75" THROAT DEPTH 12" FROM CENTER OF RAM PRESSING SPEED 250 IPM RETURN SPEED 470 IPM PSI MAX. 4000 PSI DIMENSIONS APPROX. 50"L x 61"W x 97"H WEIGHT APPROX. 8000 LBS DUAL PALM CONTROLS, UPDATED HYDRAULICS, UPDATED ELECTRICS (ALLEN-BRADLEY), RAM STROKE ADJ. HANDWHEEL
[MFR]MINSTER
[Model]70
[Year]
Origin: USA Capacity:70Tons W/Air Clutch 813mm x 534mm Bed 64mm Bolster Plate Straightener/Feeder Minster Clutch Control
[MFR]
[Model]PE 63
[Year]
RECYCLED pressure:63 t min. ram stroke:12 mm max. ram stroke:100 mm ram head dimension:(BXT) 450 x 280 mm Bore:Einspannzapfen 40 mm table surface area:800 x 570 mm table pass:180 mm tracking travel:93 mm safety distance:360 mm turning speeds:720 U/min total power requirement:5,5 kW
[MFR]ERFURT
[Model]PEEX II 160
[Year]
Throat eccentric ERFURT press with pneumatic clutch. Max. force 160 T Table dimensions 1000�~700 mm Ram dimensions 850�~630 mm Max. height from table to lower post 600 mm Distance from table centre to post 450 mm Adjustable strokes: 32-140 mm Strokes per minute: 50 spm Spindle regulation 100 mm Motorized spindle Strokes per minute: 50 Automatic stroke and sensitive device Motor power 17 HP Voltage 380 V 50 Hz Machine dimensions 2800x1200x3400 mm Machine weight 10.5 t Electric board dimensions 1100x800x2100 mm
[MFR]ZANECH
[Model]PMS160B
[Year]1983
Maximum force (pressing): 160 t Length of the bottom working table: 1140 mm Width of the bottom working table: 760 mm Throat depth (distance from the frame to the slider axis): 400 mm Minimum length of the slider stroke: 20 mm Maximum length of the slider stroke: 140 mm Adjustment of the slider: 120 mm Maximum distance between the table and the slider (at the lower position of the slider): 580 mm Thickness of the bolster plate: 125 mm Power demand: 1.1 kW Compressed air pressure: 0.577553MPa Diameter of the hole in the working table: 490 mm Diameter of the hole in the bolster plate: 250 mm Machine height: 3390 mm Machine length: 2000 mm Machine width: 2325 mm Machine weight: 13.3 t
[MFR]ERFURT
[Model]PEE 400
[Year]
pressure:400 t stroke:40 - 140 mm strokes / minute continous:32 throat:400 mm dayligth:min/max: 450/590 mm ram adjustment:125 mm table-size:1250�~750 mm height over floor:1130 mm total power requirement:ca. 31,5 kW weight of the machine ca.:25,0 t machine dimensions LxWxH:3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH:1,0 x 0,7 x 2,1 m
[MFR]AMADA
[Model]TP-60SIL
[Year]1996
Link motion press Stroke number:40-75spm Stroke length:180mm Slide adjustment amount:70mm Slide bottom dimension 500x600mm Bolster dimensions:920x980mm DH:315mm Main motor:5.5KW Working air pressure:5.0 kgf/cm2 Sudden stop time:170ms ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.
[MFR]AIDA
[Model]NC1-80(2)
[Year]1991
stroke:160mm 40-75spm DH:310mm No die cushion ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.
[MFR]AIDA
[Model]NC2-110(1)
[Year]1988
S:110 50~100spm DH:350 Adj:90 SL:Elec. CB:Wet Type Without:CA
[MFR]AIDA
[Model]NC1-20(1)
[Year]1984
S:160 35~70spm DH:410 Adj:110 SL:Elec CB:Wet Type Without CA
[MFR]YAMADA DOBBY
[Model]20AH
[Year]2004
S:50 spm70~200 DH:195 AJ:50 BL:500x300x75 SL:260x165 Inventory in Thailand
[MFR]YAMADA DOBBY
[Model]OY-30010
[Year]1982
st80/spm100/DH170/AJ30/B350x237x45/S180x130 Inventory in Thailand
[MFR]KOMATSU
[Model]OBS-35-3
[Year]1991
S:40 120～240spm DH:225 Adj:55 B:750*400*86 SL:350*300 SE
[MFR]KOMATSU
[Model]OBS-60-2
[Year]1982
S:90 75-150spm DH:300 Adj:90 SL:450*350 B:900*550*75 VS
[MFR]AMADA
[Model]TP-110C
[Year]1989
S:150 60spm DH:365 Adj:100 SL:600*500 B:1100*700 *Number of units available
[MFR]KOMATSU
[Model]HAF-160B
[Year]1998
C type S:250 SL:700*550 B:1250*760*165 Pin hole Max open:700 CA
[MFR]KOMATSU
[Model]OBS150-2
[Year]1985
S:200 27-55spm DH:450 Adj:100 SL:700*550 B:1250*800*160 VS
[MFR]AIDA
[Model]NC1-11(2)
[Year]1983
S:180 35~65spm DH:350 Adj:90 SL:Elec. CB:Wet Type Without:CA
[MFR]AIDA
[Model]NC1-110(1)
[Year]1992
S:110 50～100:spm DH:320 Adj:90 SL:Elec. CB:Wet Type Without:CA
[MFR]AIDA
[Model]NC1-110(1)
[Year]1990
S:110 50～100:spm DH:320 Adj:90 SL:Elec. CB:Wet Type Without:CA
[MFR]MICRON
[Model]MICRON 25T
[Year]2002
MODEL NO. MICRON C-FRAME CAPACITY 25 TONS SLIDE STROKE 30 MM NO. OF STROKE 200-800 SPM SHUT HEIGHT 200 MM SLIDE ADJUSTMENT 30 MM BED AREA 600 X 300 MM ATTACHMENTS ROLLER FEEDER
[MFR]AIDA
[Model]PC-10(2)
[Year]1974
Capacity: 100 TON Stroke：170mm S.P.M：65 Die height：350 mm Slide：75 mm (manual） Bed dimension：560 W x 1065 L Ram dimension：450W x 600 L
