SPECIFICATION | ◆ Maximum swing: 550 mm
◆ Drilling capacity (S45C): 40 mm
◆ Drilling capacity (FC25): 50 mm
◆ Tapping capacity (S45C): M24
◆ Tapping capacity (FC25): M30
◆ Distance from spindle nose to table surface: 5–730 mm
◆ Distance from spindle nose to base surface: 915–1135 mm
◆ Vertical travel (automatic): 180 mm
◆ Vertical travel (manual): 220 mm
◆ Taper bore: M.T. No. 4
◆ Number of spindle speed settings: 12
◆ Spindle speed (50 Hz): 60–1270 rpm
◆ Spindle speed (60 Hz): 75–1525 rpm
◆ Number of feed settings: 3
◆ Automatic feed rates: 0.10, 0.20, 0.30 mm/rev.
◆ Working surface dimensions: φ510 mm
◆ Vertical travel: 500 mm
◆ T-slot (nominal size): 16 mm
◆ Spindle motor: 1.5 kW, 4-pole
◆ Height: 2200 mm
◆ Required floor space (width × depth): 800 × 1200 mm
◆ Weight: 650 kg
✤ In the event of any discrepancy between these specifications and the actual unit, the actual unit shall take precedence. |
|---|
