SPECIFICATION | ◆Power supply: Matrix
◆Movement amount XYZ: 510×510×460
◆Travel AC: 30° to -120°, ±360°
◆Distance from table top to spindle end: 190 to 650mm (table water surface)
◆Table work surface size: Φ500×W400
◆Maximum loading work dimensions: Φ500×405
◆Maximum loading mass of table (equal distribution): 300kg
◆Table top shape: 18mm T-slot x 5, 80 pitch
◆Spindle rotation speed: 12000min-1
◆Spindle taper hole: 7/24 taper NO.40
◆Spindle bearing inner diameter: Φ80
◆Rapid feed speed XYZ axis/A axis/C axis: 52000mm/min, 10min-1, 25min-1
◆Cutting feed rate XYZ axis/A axis/C axis: 1~52000mm/min, 1~10min-1, 1~25min-1
◆Minimum indexing angle A-axis, C-axis: 0.0001
◆Tool shank shape: BT-40
◆Number of tools stored: 30
◆Maximum tool diameter/length/mass: Φ80mm/300mm/8kg
◆Maximum tool diameter when there is no adjacent tool: Φ125mm
◆Tool selection method: Address fixed automatic shortcut method
◆Tool change time: 4.5 seconds
◆ Spindle electric motor: (1 minute/30 minutes/continuous rating): 26.4/22/15kw
◆Coolant electric motor: 0.230/0.365KW
◆Power supply: 36.6/44.5kVA (continuous/30 minutes)
◆Air pressure source: 360NL/min
✤If there is a discrepancy between the specifications and the actual product, priority will be given to the actual product. |
|---|
