SPECIFICATION | ◆Control device: OSPU100L
◆Hydraulic tailstock: Dead type MT No.5
◆Hydraulic chuck: N-10-A08-01A
◆Swing above bed: Φ620
◆Swing above carriage: Φ480
◆Center distance: 675
◆Maximum machining diameter: Φ420
◆Maximum machining length: 650
◆Travel amount XZ: 300 (210 + 90) * 1275
◆Spindle rotation speed: 35 to 3500
◆Spindle speed range: Automatic 2-stage (VAC motor winding switching)
◆Spindle end: JIS A2-8
◆Spindle through hole diameter: Φ80
◆Spindle bearing inner diameter: Φ120
◆Tool post: V12M
◆Number of tools mounted on tool post: L12
◆Shank height of square tool: 25
◆Diameter of boring bar shank: Φ40
◆Tool post indexing time: 0.2
◆Fast forward speed: X20000/Z25000
◆Cutting feed speed: X,Z0.001-1000000
◆Tailstock shaft diameter: Φ100
◆Type of tailstock shaft taper hole: MT No.5 (rotating center)
◆Tailstock shaft travel distance: 150
◆Spindle motor: VAC 22/15 (30 min/continuous)
◆Feed motor: X: BL4/Z: BL6
◆Cutting fluid motor: Side chip discharge: 0.25, Rear discharge: 0.8
◆Power supply: 29.5 (continuous)
◆Machine height: 2110
◆Floor space required: 3980 x 1900
◆Machine weight: 5400
*Special specifications
◆Touch setter: M
◆Easy dialogue kit
◆Program storage capacity Tape length 320m → 640m
✤If there is a difference between the specifications and the actual product, the actual product will take precedence. |
|---|
